Datasheet

ManualsBrandsKEMET ManualsCapacitorsCeramic Capacitor, 10pF, 200V, 5%

One world. One KEMET

Overview

KEMET’s High Temperature 200ºC epoxy molded radial

through-hole ceramic capacitors in C0G dielectric features

a robust and proprietary base metal dielectric system

that offers industry-leading performance in extreme high

pressure and high temperature environments up to 200°C.

These capacitors are designed specically to withstand

the severe shock and vibration conditions associated

with deep-well and horizontal drilling activities and are

well suited for use in aerospace engine compartments,

geophysical probes, hybrid and electric automotive motor

drives and defense applications.

As high temperature electronic module complexity

increases, the size reduction of components becomes

more and more critical. These devices are signicantly

smaller by volume than most competitor radial molded

capacitors, allowing for downsizing and replacement

opportunities of larger high temperature precious metal

electrode (PME) and base metal electrode (BME) dielectric

system devices. They feature gold-plated lead wires for

temperature resistance and an epoxy molded case for

environmental protection and mechanical durability.

With virtually no capacitance change at 200°C and rated

voltage applied, these radial molded capacitors in C0G

dielectric are temperature compensating and are suited

for resonant circuit applications or those where Q and

stability of capacitance characteristics are required. They

exhibit no change in capacitance with respect to time and

voltage and boast a negligible change in capacitance with

reference to ambient temperature. Capacitance change is

limited to ±30ppm/ºC from −55°C to +200°C. In addition,

these capacitors exhibit high insulation resistance with low

dissipation factor at elevated temperatures up to 200°C, as

well as low ESR at high frequencies.

Radial Through-Hole Multilayer Ceramic Capacitors

High Temperature 200°C, Radial, Molded, C0G Dielectric,

50 – 200 VDC (Industrial Grade)

Ordering Information

C 052 H 272 F 2 G 5 G A 7301

Ceramic

Style/

Size

Specication/

Series

Capacitance

Code (pF)

Capacitance

Tolerance

Rated

Voltage

(VDC)

Dielectric Design

Lead

Finish

Failure

Rate

Packaging

C-Spec

052

062

H =

High Temp

200ºC

Two signicant digits

and number of zeros

Use 9 for 1.0 – 9.9 pF

ex. 2.2 pF = 229

B = ±0.1 pF

C = ±0.25 pF

D = ±0.5 pF

F = ±1%

G = ±2%

J = ±5%

K = ±10%

5 = 50

1 = 100

2 = 200

G =

C0G

5 =

Multilayer

G =

Gold (Au)

A =

N/A

Blank = Bulk Bag

T250 = 250 pcs/

12" Reel

T500 = 500 pcs/

12" Reel

T1K0 = 1,000 pcs/

12" Reel

7301 = Full Reel Qty/

12" Reel

7303 = Full Reel Qty/

12" Reel

7061 = Bulk Tray

Additional capacitance tolerance offerings may be available. Contact KEMET for details.

Wire lead materials and nishes: Alternative lead materials and nishes may be available. Contact KEMET for details.

Default packaging for this product series is "Bulk Bag". KEMET will assume "Bulk Bag" packaging is required when the 15th thru 18th character

positions are left blank.

C-Spec 7301 can only be used when ordering 052 style/size.

C-Spec 7303 can only be used when ordering 062 style/size.

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (13 pages)

PAGE 1
Radial Through-Hole Multilayer Ceramic Capacitors High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade) Overview KEMET’s High Temperature 200ºC epoxy molded radial through-hole ceramic capacitors in C0G dielectric features a robust and proprietary base metal dielectric system that offers industry-leading performance in extreme high pressure and high temperature environments up to 200°C.
PAGE 2
Radial Through-Hole Multilayer Ceramic Capacitors High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade) Dimensions – Inches (Millimeters) C052H C062H L 0.045 (1.143) Maximum T L T H H LL LL LD LD S Series S S Lead Spacing L Length H Height T Thickness LD Lead Diameter LL Lead Length Minimum 0.20±0.015 (5.08±0.38) 0.19±0.01 (4.83±0.25) 0.29±0.01 (7.37±0.25) 0.19±0.01 (4.83±0.25) 0.29±0.01 (7.37±0.25) 0.09±0.01 (2.29±0.25) 0.09±0.01 (2.29±0.25) 0.025+0.
PAGE 3
Radial Through-Hole Multilayer Ceramic Capacitors High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade) Qualification These devices are subject to internal qualification. Details regarding test methods and conditions are referenced in Table 2, Performance & Reliability. Environmental Compliance RoHS compliant and halogen-free. These devices utilize exemption 7(a) of the RoHS directive.
PAGE 4
Radial Through-Hole Multilayer Ceramic Capacitors High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade) Table 1A – C052 Style/Size (0.20" Lead Spacing), Capacitance Range Waterfall C052 Style/Size (0.20" Lead Spacing) Rated Voltage (VDC) 50 100 200 Voltage Code 5 1 2 Capacitance Tolerance Capacitance 1 pF 1.2 pF 1.5 pF 1.8 pF 2.2 pF 2.7 pF 3.3 pF 3.9 pF 4.7 pF 5.6 pF 6.8 pF 8.
PAGE 5
Radial Through-Hole Multilayer Ceramic Capacitors High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade) Table 1A – C052 Style/Size (0.20" Lead Spacing), Capacitance Range Waterfall cont'd C052 Style/Size (0.20" Lead Spacing) Rated Voltage (VDC) 50 100 200 Voltage Code 5 1 2 Capacitance Tolerance Capacitance 2,700 pF 3,300 pF 3,900 pF 4,700 pF 5,600 pF 6,800 pF 8,200 pF 0.01 µF 0.012 µF 0.015 µF 0.018 µF 0.022 µF 0.027 µF 0.033 µF 0.039 µF 0.047 µF 0.056 µF 0.
PAGE 6
Radial Through-Hole Multilayer Ceramic Capacitors High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade) Table 1B – C062 Style/Size (0.20" Lead Spacing), Capacitance Range Waterfall C062 Style/Size (0.20" Lead Spacing) Rated Voltage (VDC) 50 100 200 Voltage Code 5 1 2 Capacitance 4,700 pF 5,600 pF 6,800 pF 0.056 µF 0.068 µF 0.082 µF 0.1 µF 0.12 µF 0.15 µF 0.18 µF 0.
PAGE 7
Radial Through-Hole Multilayer Ceramic Capacitors High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade) Soldering Process Recommended Soldering Technique: • Solder Wave • Hand Soldering (Manual) Recommended Soldering Profile: • Optimum Wave Solder Profile Solder Wave Peak Temperature 260ºC Entrance to Solder Wave Degrees – Cº Flux Zone 250 225 200 175 150 125 100 75 50 25 Exit from Solder Wave (Time in Wave – 2 to 4 Seconds) Preheat Zone Hot Air Debridging Exit from
PAGE 8
Radial Through-Hole Multilayer Ceramic Capacitors High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade) Table 2 – Performance & Reliability: Test Methods and Conditions Stress Reference Solderability J–STD–002 Temperature Cycling JESD22 Method JA–104 Biased Humidity MIL–STD–202 Method 103 Immersion Storage Life High Temperature Life High Temperature Lead Pull Vibration Resistance to Soldering Heat Terminal Strength Mechanical Shock Resistance to Solvents MIL–STD–2
PAGE 9
Radial Through-Hole Multilayer Ceramic Capacitors High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade) Application Notes Working Voltage: Application voltage (Vp-p or Vo-p) must not exceed the voltage rating of the capacitor. Irregular voltages can be generated for a transient period of time when voltage is initially applied and/or removed from a circuit. It is important to choose a capacitor with a voltage rating greater than or equal to these irregular voltages.
PAGE 10
Radial Through-Hole Multilayer Ceramic Capacitors High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade) Construction Epoxy Encapsulation Finish Layer (Sn10/Pb88/Ag2) Detailed Cross Section Barrier Layer (Ni) Base Metal (Cu) Lead Attach Solder (Sn10/Pb88/Ag2) Lead Attach Solder (Sn10/Pb88/Ag2) Dielectric Material (CaZrO3) Inner Electrodes (Ni) Barrier Layer (Ni) Base Metal (Cu) Finish Layer (Sn10/Pb88/Ag2) Lead Wire Core Metal Barrier Layer 1 Barrier Layer 2 Finish
PAGE 11
Radial Through-Hole Multilayer Ceramic Capacitors High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade) Lead Tape & Reel Packaging Information KEMET offers standard reeling of Molded Radial Leaded Capacitors in accordance with EIA standard 468. Parts are taped to a tag board carrier strip, and wound on a reel as shown in Figure 1. Kraft paper interleaving is inserted between the layers of capacitors on the reel. t © KEMET Electronics Corporation • P.O.
PAGE 12
Radial Through-Hole Multilayer Ceramic Capacitors High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade) Table 3 – Ceramic Radial Tape and Reel Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) D0 P2 P0 P ∆H ±0.2 (0.008) ±0.3 (0.012) ±0.3 (0.012) ±0.7 (0.028) Maximum L1 Maximum t Maximum W T W0 + 1.0/−0.5 Maximum (+0.039/−0.020) Minimum 4.00 (0.157) 12.7 (0.500) 12.7 (0.500) 6.35 (0.250) 1.0 (0.039) 1.0 (0.039) 0.9 (0.035) 2.0 (0.079) 18.0 (0.
PAGE 13
Radial Through-Hole Multilayer Ceramic Capacitors High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade) KEMET Electronic Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.