Datasheet

Radial Through-Hole Multilayer Ceramic Capacitors

High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)

Application Notes

Working Voltage:

Application voltage (Vp-p or Vo-p) must not exceed the voltage rating of the capacitor. Irregular voltages can be generated

for a transient period of time when voltage is initially applied and/or removed from a circuit. It is important to choose a

capacitor with a voltage rating greater than or equal to these irregular voltages.

Operating Temperature and Self-Generating Heat:

The surface temperature of a capacitor should be kept below the upper limit of its rated operating temperature range. Be

sure to take into account the heat generated by the capacitor itself. When the capacitor is used in a high-frequency current,

pulse current or similar current, it may self-generate heat due to dielectric loss. Temperature rise due to self-generated

heating should not exceed 20°C (while operated at an atmosphere temperature of 25°C).

FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR

PARTIAL DISPERSION WHEN THE PRODUCT IS USED.