Datasheet

ManualsBrandsKEMET ManualsCapacitorsSMD Multilayer AEC-Q200 Ceramic Capacitor 10uF ±5% 10VDC X7R 0805

One world. One KEMET

Benets

• AEC–Q200automotivequalied

• −55°Cto+125°Coperatingtemperaturerange

• Lead(Pb)-free,RoHSandREACHcompliant

• Temperaturestabledielectric

• EIA0402,0603,0805,1206,1210,1808,1812,1825,and

2220 case sizes

• DCvoltageratingsof6.3V,10V,16V,25V,50V,100V,

200Vand250V

• Capacitanceofferingsrangingfrom10pFto22μF

• Availablecapacitancetolerancesof±5%,±10%and±20%

• Non-polardevice,minimizinginstallationconcerns

• 100%puremattetin-platedterminationnish,allowingfor

excellentsolderability

Overview

TheKEMETAutomotiveGradeSurfaceMountCapacitors

inX7Rdielectricaresuitedforavarietyofapplications

requiringproven,reliableperformanceinharsh

environments.Whetherunderhoodorin-cabin,these

devicesemphasizethevitalandrobustnatureofcapacitors

requiredformissionandsafetyofcriticalautomotive

circuits.Strictertestingprotocolandinspectioncriteria

havebeenestablishedforautomotivegradeproductsin

recognitionofpotentiallyharshenvironmentalconditions.

KEMETautomotivegradecapacitorsmeetthedemanding

AutomotiveElectronicsCouncil'sAEC-Q200qualication

requirements.

X7Rdielectricfeaturesa125°Cmaximumoperating

temperatureandisconsideredtemperaturestable.The

ElectronicsIndustriesAlliance(EIA)characterizesX7R

dielectricasaClassIImaterial.Componentsofthis

classicationarexed,ceramicdielectriccapacitors,suited

forbypassanddecouplingapplications,orforfrequency

discriminatingcircuits,whereQandstabilityofcapacitance

characteristicsarenotcritical.X7Rexhibitsapredictable

changeincapacitancewithrespecttotimeandvoltage,

andboastsaminimalchangeincapacitancewithreference

toambienttemperature.Capacitancechangeislimitedto

±15%from−55°Cto+125°C.

SurfaceMountMultilayerCeramicChipCapacitors(SMDMLCCs)

X7R Dielectric, 6.3 – 250 VDC (Automotive Grade)

Applications

Typicalapplicationsincludedecoupling,bypass,lteringandtransientvoltagesuppression.

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (24 pages)

PAGE 1
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Automotive Grade) Overview The KEMET Automotive Grade Surface Mount Capacitors in X7R dielectric are suited for a variety of applications requiring proven, reliable performance in harsh environments. Whether underhood or in-cabin, these devices emphasize the vital and robust nature of capacitors required for mission and safety of critical automotive circuits.
PAGE 2
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Automotive Grade) Ordering Information C Ceramic 0805 Case Size Specification/ (L" x W") Series 0402 0603 0805 1206 1210 1808 1812 1825 2220 1 C C = Standard 225 Capacitance Code (pF) Two significant digits and number of zeros. M 4 R A C Failure Capacitance Rated Voltage Dielectric Termination Finish1 Tolerance (VDC) Rate/Design J = ±5% K = ±10% M = ±20% 9 = 6.
PAGE 3
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Automotive Grade) Automotive C-Spec Information KEMET automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AEC–Q200, Stress Test Qualification for Passive Components. These products are supported by a Product Change Notification (PCN) and Production Part Approval Process warrant (PPAP).
PAGE 4
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Automotive Grade) Dimensions – Millimeters (Inches) L W B T S EIA Size Code Metric Size Code 0402 1005 06031 1608 08052 2012 12063 3216 1210 4 3225 1812 4532 2220 5650 L Length W Width 1.00 (0.040) ±0.05 (0.002) 1.60 (0.063) ±0.15 (0.006) 2.00 (0.079) ±0.20 (0.008) 3.20 (0.126) ±0.20 (0.008) 3.20 (0.126) ±0.20 (0.008) 4.50 (0.177) ±0.30 (0.012) 5.70 (0.224) ±0.40 (0.016) 0.50 (0.020) ±0.
PAGE 5
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Automotive Grade) Electrical Parameters/Characteristics Item Parameters/Characteristics Operating Temperature Range −55°C to +125°C Capacitance Change with Reference to +25°C and 0 VDC Applied (TCC) ±15% Aging Rate (Maximum % Capacitance Loss/Decade Hour) 3.
PAGE 6
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Automotive Grade) Post Environmental Limits High Temperature Life, Biased Humidity, Moisture Resistance EIA Case Size 0402 Rated DC Voltage Capacitance Dissipation Factor (Maximum %) < 16 All 7.5 16/25 All 5.0 > 25 All 3.0 < 16 0603 16/25 0805 12061 1210 1808 – 2225 1 < 1.0 µF 10% of Initial limit 3.0 20.0 < 4.7 µF 7.5 ≥ 4.7 µF 20.0 < 4.7 µF 5.0 ≥ 4.7 µF 20.0 25 All 5.
PAGE 7
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Automotive Grade) Dissipation Factor (DF) Limits Table EIA Case Size 0402 0603 Rated DC Voltage < 16 16/25 > 25 < 16 16/25 > 25 All < 16 0805 16 12061 25 > 25 < 16 16/25 > 25 < 16 16 1210 25 > 25 Capacitance All < 1.0 µF ≥ 1.0 µF < 4.7 µF ≥ 4.7 µF < 4.7 µF ≥ 4.7 µF All All All All All All 16/25 > 25 1 5.0 3.5 2.5 5.0 3.5 2.5 10.0 5.0 10.0 3.5 10.0 3.5 2.5 5.0 3.5 2.5 5.0 3.5 < 10 µF 3.
PAGE 8
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.
PAGE 9
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Automotive Grade) Table 1A – Capacitance Range/Selection Waterfall (0402 – 1206 Case Sizes) cont'd A 250 2 200 1 250 5 200 16 3 100 4 100 8 3 5 1 2 A 25 9 50 A 25 2 50 1 10 5 6.3 3 250 4 100 8 C1206C 200 9 50 A 16 2 25 1 10 16 5 6.3 10 3 250 4 200 8 100 9 C0805C 25 5 50 10 C0603C 6.3 6.
PAGE 10
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.
PAGE 11
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.
PAGE 12
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Automotive Grade) Table 2 – Chip Thickness/Tape & Reel Packaging Quantities cont'd. Paper Quantity1 Plastic Quantity Thickness Code Case Size1 Thickness ± Range (mm) 7" Reel 13" Reel 7" Reel 13" Reel NA NC LD LF GB GC GD GE GH GG GK GJ GL GO HB HD HF JB JC JD JE JF JO 1706 1706 1808 1808 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1825 1825 1825 2220 2220 2220 2220 2220 2220 0.90 ± 0.10 1.00 ± 0.
PAGE 13
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Automotive Grade) Table 3 – Chip Capacitor Land Pattern Design Recommendations per IPC–7351 EIA Size Code Metric Size Code 0402 Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) C Y X V1 V2 C Y X V1 V2 C Y X V1 V2 1005 0.50 0.72 0.72 2.20 1.20 0.45 0.62 0.62 1.90 1.00 0.
PAGE 14
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Automotive Grade) Soldering Process Recommended Soldering Technique: • Solder wave or solder reflow for EIA case sizes 0603, 0805 and 1206 • All other EIA case sizes are limited to solder reflow only Recommended Reflow Soldering Profile: The KEMET families of surface mount multilayer ceramic capacitors (SMD MLCCs) are compatible with wave (single or dual), convection, IR or vapor phase reflow techniques.
PAGE 15
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Automotive Grade) Construction (Typical) Detailed Cross Section Dielectric Material (BaTiO3) Barrier Layer (Ni) Termination Finish (100% Matte Sn) Dielectric Material (BaTiO3) End Termination/ External Electrode (Cu) Inner Electrodes (Ni) End Termination/ External Electrode (Cu) Barrier Layer (Ni) Termination Finish (100% Matte Sn) Inner Electrodes (Ni) © KEMET Electronics Corporation • P.O.
PAGE 16
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Automotive Grade) Capacitor Marking (Optional): These surface mount multilayer ceramic capacitors are normally supplied unmarked. If required, they can be marked as an extra cost option. Marking is available on most KEMET devices, but must be requested using the correct ordering code identifier(s).
PAGE 17
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Automotive Grade) Capacitor Marking (Optional) cont’d Capacitance (pF) For Various Alpha/Numeral Identifiers Numeral Alpha Character 9 A 0.10 1.0 10 100 1,000 10,000 B 0.11 1.1 11 110 1,100 11,000 C 0.12 1.2 12 120 1,200 12,000 D 0.13 1.3 13 130 1,300 E 0.15 1.
PAGE 18
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Automotive Grade) Tape & Reel Packaging Information KEMET offers multilayer ceramic chip capacitors packaged in 8, 12 and 16 mm tape on 7" and 13" reels in accordance with EIA Standard 481. This packaging system is compatible with all tape-fed automatic pick and place systems. See Table 2 for details on reeling quantities for commercial chips.
PAGE 19
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Automotive Grade) Figure 1 – Embossed (Plastic) Carrier Tape Dimensions P2 T T2 ØD0 (10 pitches cumulative tolerance on tape ±0.2 mm) P0 A0 E1 F K0 B1 E2 B0 S1 W P1 T1 Center Lines of Cavity ØD1 Cover Tape B1 is for tape feeder reference only, including draft concentric about B0.
PAGE 20
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Automotive Grade) Figure 2 – Punched (Paper) Carrier Tape Dimensions T Po ØDo (10 pitches cumulative tolerance on tape ±0.
PAGE 21
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Automotive Grade) Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 kg minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.3 newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel.
PAGE 22
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Automotive Grade) Figure 6 – Reel Dimensions Full Radius, See Note W3 (Includes flange distortion at outer edge) Access Hole at Slot Location (Ø 40 mm minimum) W2 D A (See Note) N C (Arbor hole diameter) B (see Note) (Measured at hub) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.
PAGE 23
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.
PAGE 24
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Automotive Grade) KEMET Electronics Corporation Sales Oﬃces For a complete list of our global sales oﬃces, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.