Brochure

ManualsBrandsKEMET ManualsAC Capacitors for Energy StorageAC Power Capacitor, 22uF, 1kV, 10%

Power and AC Film Capacitors

Aluminum Can Power Film Capacitors – C44P/C20A Series, 250 – 1,000 VAC, 400 – 1,400 VDC, for PFC and AC Filter

General Technical Data

Reference Standards

IEC 61071

UL810 approved

Dielectric

Polypropylene lm

Non-inductive type winding

Climatic Category 25/70/56 – IEC 60068-1

Maximum hot spot temperature +80°C

Endurance Test IEC 61071 +70°C @ Case Temperature

Installation Whatever position

Tinned brass deck with self estinguish UL94 V0 plastic insulators

Electrical Characteristics

Rated Voltage

Urms = (see table) VAC

Surge Voltage Us = (see table) VDC

Capacitance Tolerance ±5% or ±10%

Dissipation Factor PP typical (tgδ0) ≤ 0.0002 at 25°C

Relative Humidity

Annual average ≤ 80% at 24°C

On 30 days/year permanently 100%. on other days occasionally 90%.

Dewing not admitted

Capacitance deviation in temperature

range (-40 +50°C)

±1.5% maximum on capacitance value at 20°C

Life Expectancy

Life Expectancy 100,000 hours @ V

RMS

with T

≤ 75°C

Capacitance drop at end of life - 5% (typical)

Failure Rate IEC 61709 See FIT Graph

Test Methods

Test voltage term to term (Utt)

1.5 x V

RMS

for 10 seconds at 25°C

Test voltage term to case (Utc)

3,600 V ~ 50 Hz for 10 seconds (C44P)

6,000 V ~ 50 Hz for 10 seconds (C20A)

Damp Heat IEC 60068-2-78

Change of Temperature IEC 60068-2-14

Vibration Strength IEC 60068-2-6

NOTICE: Care should be taken to ensure that there still is electrical clearance of 15 mm between terminations and other live or earthed parts above the capacitor,

in case of safety device activation.