Datasheet

ManualsBrandsKEMET ManualsCapacitorsCeramic Capacitor, 1uF, 50V, 10%

One world. One KEMET

Benets

• Radial through-hole form factor

• Conformally coated

• Operating temperature range of -55°C to +150°C

• Lead (Pb)-Free, RoHS and REACH compliant

Overview

KEMET’s Goldmax conformally coated radial through-hole

ceramic capacitors in X8L dielectric feature a +150°C

maximum operating temperature and is considered "general

purpose high temperature". These components are xed,

ceramic dielectric capacitors that are suited for high

temperature bypass and decoupling applications or frequency

discriminating circuits, where Q and stability of capacitance

characteristics are not critical. X8L exhibits a predictable

change in capacitance with respect to time and voltage,

and boasts a minimal change in capacitance with reference

to ambient temperature up to +125°C. Beyond +125°C X8L

displays a wider variation in capacitance. Capacitance change

is limited to ±15% from −55°C to +125°C and +15, −40% from

+125°C to +150°C.

Driven by the demand for a more robust and reliable component,

X8L dielectric capacitors were developed for critical applications

where reliability at higher operating temperatures are a concern.

These capacitors are widely used in automotive circuits as well

as general high temperature applications.

In addition to commercial grade, automotive grade devices

are available and meet the demanding Automotive Electronics

Council's AEC–Q200 qualication requirements.

These devices meet the ame test requirements outlined in UL

Standard 94V–0.

Radial Through-Hole Multilayer Ceramic Capacitors

Goldmax, 300, Radial, Conformally Coated,

X8L Dielectric, 25 – 50 VDC

(Commercial and Automotive Grade)

Ordering Information

C 320 C 475 K 3 N 5 T A 7301

Ceramic Style/Size

Specication/

Series

Capacitance

Code (pF)

Capacitance

Tolerance

Rated Voltage

(VDC)

Dielectric Design

Lead

Finish

Failure

Rate

Packaging

(C-Spec)

315

316

317

318

320

321

322

323

324

325

326

327

328

C =

Standard

First two digits

represent

signicant

gures. Third

digit species

number of

zeros.

J = ±5%

K = ±10%

M = ±20%

3 = 25

5 = 50

N =

X8L

5 =

Multilayer

T = 100%

Matte Sn

H = SnPb

(60/40)

A =

N/A

See

"Packaging

C-Spec

Ordering

Options

Table" below

Additional capacitance tolerance offerings may be available. Contact KEMET for details.

For overmolding applications please contact your KEMET representative.

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (15 pages)

PAGE 1
Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial and Automotive Grade) Overview KEMET’s Goldmax conformally coated radial through-hole ceramic capacitors in X8L dielectric feature a +150°C maximum operating temperature and is considered "general purpose high temperature".
PAGE 2
Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial and Automotive Grade) Benefits cont'd • DC voltage ratings of 25 and 50 V • Capacitance offerings ranging from 0.15 μF up to 4.
PAGE 3
Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial and Automotive Grade) Dimensions – Inches (Millimeters) Shoulder Bend (Short) L C317 C321 C322 T Shoulder Bend (Tall) L C318 C323 C328 H Seating Plane F F S L T LL LL F S L C324 H All Others: 0.06 max (1.52 mm) Snap-In Type 2 H T C315 C320 S Outside Kink C316 C326 C327 L C340: 0.10 max (2.
PAGE 4
Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial and Automotive Grade) Automotive C-Spec Information KEMET Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. The details regarding test methods and conditions are referenced in the document AEC–Q200, Stress Test Qualification for Passive Components.
PAGE 5
Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial and Automotive Grade) Qualification/Certification Commercial Grade products are subject to internal qualification. Details regarding test methods and conditions are referenced in Table 2, Performance & Reliability. Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council.
PAGE 6
Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial and Automotive Grade) Electrical Parameters/Characteristics Item Parameters/Characteristics Operating Temperature Range: Capacitance Change with Reference to +25°C and 0 VDC Applied (TCC): Aging Rate (Maximum % Cap Loss/Decade Hour): Dielectric Withstanding Voltage: Dissipation Factor (DF) Maximum Limit at +25ºC: Insulation Resistance (IR) Limit at +25°C: −55°C to +150°C ±1
PAGE 7
Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial and Automotive Grade) Table 1A - C31X Style/Size (0.100" & 0.200" Lead Spacing), Capacitance Range Waterfall C315, C316, C317, C318 Style/Size (0.100" & 0.200" Lead Spacing) Rated Voltage (VDC) 25 50 Voltage Code 3 5 Capacitance 0.15µF 0.18µF 0.22µF 0.27µF 0.33µF 0.39µF 0.47µF 0.56µF 0.
PAGE 8
Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial and Automotive Grade) Table 1C - C32X Style/Size (0.100" & 0.200" Lead Spacing), Capacitance Range Waterfall C321, C324, C325, C327 Style/Size (0.100" & 0.200" Lead Spacing) Rated Voltage (VDC) 25 50 Voltage Code 3 5 Capacitance 0.39µF 0.47µF 0.56µF 0.68µF 0.82µF 1.0µF 1.2µF 1.5µF 1.8µF 2.2µF 2.7µF 3.3µF 3.9µF 4.
PAGE 9
Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial and Automotive Grade) Soldering Process Recommended Soldering Methods: • Solder Wave • Hand Soldering (Manual) Recommended Soldering Profile: • Optimum Wave Solder Profile Solder Wave Peak Temperature 260ºC Entrance to Solder Wave Degrees – Cº Flux Zone 250 225 200 175 150 125 100 75 50 25 Exit from Solder Wave (Time in Wave – 2 to 4 Seconds) Preheat Zone Hot Air Debridg
PAGE 10
Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial and Automotive Grade) Table 2 – Performance & Reliability: Test Methods and Conditions Stress Reference Solderability J–STD–002 Temperature Cycling JESD22 Method JA–104 Biased Humidity MIL–STD–202 Method 103 Moisture Resistance Thermal Shock High Temperature Life Storage Life Vibration Resistance to Soldering Heat Terminal Strength Mechanical Shock Resistance to Solven
PAGE 11
Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial and Automotive Grade) Construction Epoxy Encapsulation Finish Layer (Sn) Detailed Cross Section Barrier Layer (Ni) Base Metal (Cu) Lead Attach Solder (95Sn/5Ag) Lead Attach Solder (95Sn/5Ag) Dielectric Material (BaTiO3) Inner Electrodes (Ni) Base Metal (Cu) Finish Layer (Sn) Barrier Layer (Ni) Core Metal Barrier Layer Lead Wire Std Alt 1 Steel Cu Ni 100% 60% Sn Finis
PAGE 12
Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial and Automotive Grade) Packaging Quantities Style/ Size 315 316 317 318 320 321 322 323 324 325 326 327 328 Standard Bulk Quantity Ammo Pack Quantity Maximum Reel Quantity Maximum (12" Reel) 2,500 2,500 N/A N/A 2,500 2,500 500/Bag © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.
PAGE 13
Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial and Automotive Grade) Tape & Reel Packaging Information KEMET offers standard reeling of Molded and Conformally Coated Radial Leaded Capacitors in accordance with EIA standard 468. Parts are taped to a tagboard carrier strip, and wound on a reel as shown in Figure 1. Kraft paper interleaving is inserted between the layers of capacitors on the reel.
PAGE 14
Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial and Automotive Grade) Ceramic Radial Tape and Reel Dimensions cont'd Metric will govern Variable Dimensions — Millimeters (Inches) F ±0.78 (0.030)1 P1 ±0.30 (0.012)1 P ±0.3 (0.012) P2 ±1.3 (0.51) 2.54 (0.100) 5.08 (0.200) 12.7 (0.500) 6.35 (0.250) 4.32 (0.170) 3.89 (0.153) 12.7 (0.500) 6.35 (0.250) 5.08 (0.200) 3.81 (0.150) 12.7 (0.500) 6.35 (0.250) 5.59 (0.
PAGE 15
Radial Through-Hole Multilayer Ceramic Capacitors Goldmax, 300, Radial, Conformally Coated, X8L Dielectric, 25 – 50 VDC (Commercial and Automotive Grade) KEMET Electronic Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.