Datasheet

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1050_GOLDMAX_X7R • 12/11/2017 18
Radial Leaded Multilayer Ceramic Capacitors
Goldmax, 300 Series, Conformally Coated, X7R Dielectric, 25 – 250 VDC (Commercial Grade)
Ceramic Radial Tape and Reel Dimensions cont'd
Metric will govern
Variable Dimensions — Millimeters (Inches)
F
±0.78 (0.030)
1
P
1
±0.30 (0.012)
1
P
±0.3 (0.012)
P
2
±1.3 (0.51)
H
H
0
StraightLeadConguration FormedLeadConguration
2
Packaging C-Spec
3
7301/7305
7303/7317
7301/7305
7303/7317
2.54 (0.100) 5.08 (0.200) 12.7 (0.500) 6.35 (0.250)
16.0±0.5
(0.630±0.020)
18.0 (0.709)
Minimum
16.0±0.5
(0.630±0.020)
18.0 (0.709)
Minimum
4.32 (0.170) 3.89 (0.153) 12.7 (0.500) 6.35 (0.250)
5.08 (0.200) 3.81 (0.150) 12.7 (0.500) 6.35 (0.250)
5.59 (0.220) 3.25 (0.128) 12.7 (0.500) 6.35 (0.250)
6.98 (0.275) 2.54 (0.100) 12.7 (0.500) 6.35 (0.250)
7.62 (0.300) 2.24 (0.088) 12.7 (0.500) 6.35 (0.250)
9.52 (0.375) 7.62 (0.300) 12.7 (0.500) 6.35 (0.250)
10.16 (0.400) 7.34 (0.290) 25.4 (1.000) N/A
12.06 (0.475) 6.35 (0.250) 25.4 (1.000) N/A
14.60 (0.575) 5.08 (0.200) 25.4 (1.000) N/A
17.14 (0.675) 3.81 (0.15) 25.4 (1.000) N/A
1
Measuredattheegressfromthecarriertape,onthecomponentside.
2
Formedleadcongurationincludes:"shoulderbend","insidekink","outsidekink",and"snap-in".Formoreinformationregardingavailablelead
congurationssee"Dimensions"sectionofthisdocument.
3
The"PackagingC-Spec"isa4digitcodewhichidentiesthepackagingtype,leadlengthand/orleadmaterial.Whenordering,thepropercodemustbe
includedinthe15ththrough18thcharacterpositionsoftheorderingcode.See"OrderingInformation"sectionofthisdocumentforfurtherdetails.
Symbol Reference Table
D
0
Sprocket Hole Diameter
P
0
SprocketHolePitch
P
ComponentPitch
F
Lead Spacing
P
1
Sprocket Hole Center to Lead Center
P
2
Sprocket Hole Center To Component Center
H
HeighttoSeatingPlane(StraightLeadsOnly)
H
0
HeighttoSeatingPlane(FormedLeadsOnly)
H
1
ComponentHeightAboveTapeCenter
∆H
Component Alignment
L
1
LeadProtrusion
t
CompositeTapeThickness
W
CarrierTapeWidth
W
0
Hold-DownTapeWidth
W
2
Hold-Down Tape Location