Datasheet

ManualsBrandsKEMET ManualsCapacitorsPower Film Capacitor, 133uF, 440VAC, 1kVDC, 5%

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3117_C44P-R • 3/29/2019

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

One world. One KEMET

Benets

• Overpressure safety device

• High peak current capability

• High torque screw terminals with plastic insulator

• Long lifetime

• Self-healing

Overview

The C44P-R capacitor is a polypropylene metallized lm

capactior with a cylindrical, aluminium can-type design lled

with a soft, vegetable oil-based, polyurethane resin. It uses

screw terminals, a plastic insulator, and an overpressure

safety device.

Applications

Typical applications include commutation, power factor

correction, and AC harmonic ltering.

Aluminum Can Power Film Capacitors

C44P-R, 330 – 1,000 VAC/700 – 2,300 VDC,

for PFC & AC Filter

Part Number System

C 44 P L G R 6 4 0 0 R AS J

Series Application Rated Voltage Case Type

Terminal

Style

Capacitance Code (pF) Filling

Internal

Codes

Tolerance

MKP

Capacitors

for Power

Applications

44 =

330 – 1,000

VAC

AC lter L = 330 VAC

K = 440 VAC

M = 480 VAC

P = 550 VAC

R = 640 VAC

U = 780 VAC

X = 1,000 VAC

G =

M12

bolt

R =

Male

M10

Digits nine, ten, and

eleven indicate the

rst three digits of

capacitance value. Digit

8 indicates the number

of zeros to be added.

Polyurethane

resin lled

J = 5%

K = 10%

It is not possible to manufacture every part number which could be created from coding description. Please refer to table of standard part numbers and

ask KEMET for other possibilities.

Summary of content (8 pages)

PAGE 1
Aluminum Can Power Film Capacitors C44P-R, 330 – 1,000 VAC/700 – 2,300 VDC, for PFC & AC Filter Overview Applications The C44P-R capacitor is a polypropylene metallized film capactior with a cylindrical, aluminium can-type design filled with a soft, vegetable oil-based, polyurethane resin. It uses screw terminals, a plastic insulator, and an overpressure safety device. Typical applications include commutation, power factor correction, and AC harmonic filtering.
PAGE 2
Aluminum Can Power Film Capacitors C44P-R, 330 - 1,000 VAC/700 - 2,300 VDC, for PFC & AC Filter Dimensions – Millimeters (Ø+4)±1 P±1 Ø20±1 W1±1 M10 W±1 H±2 H1 M1 Ø±0.5 Diameter P W W1 M1 H1 Ø = 65 28 18 40 12 16 Ø ≥ 75 35 21 45 12 16 All dimensions are in mm Maximum Driving Torque Terminals M10 10 [N*m] Bolt M12 12 [N*m] © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.
PAGE 3
Aluminum Can Power Film Capacitors C44P-R, 330 - 1,000 VAC/700 - 2,300 VDC, for PFC & AC Filter General Technical Data Reference Standards Dielectric Climatic Category Maximum hot spot temperature Endurance Test IEC 61071 Installation IEC 61071 UL810 approved Polypropylene film Non-inductive type winding 25/70/56 – IEC 60068–1 +80°C +70°C at case temperature Any position Tinned brass deck with self-exstinguishing UL 94 V0 plastic insulators Electrical Characteristics Rated Voltage Urms = (see table) VA
PAGE 4
Aluminum Can Power Film Capacitors C44P-R, 330 - 1,000 VAC/700 - 2,300 VDC, for PFC & AC Filter Table 1 – Ratings & Part Number Reference 1 Maximum Dimensions (mm) Irms RS ESL Thermal Resistance VDC D H (A)1 (mΩ) (nH) (°C/W) 700 700 700 700 700 700 700 700 700 1000 1000 1000 1000 1000 1000 1000 1000 1000 1100 1100 1100 1100 1100 1100 1100 1100 1100 1280 1280 1280 1280 1280 1280 1280 1400 1400 1400 1400 1400 1400 1400 1400 1700 1700 1700 1700 1700 1700 1700 2300 2300 2300 2300 2300 2300 1050
PAGE 5
Aluminum Can Power Film Capacitors C44P-R, 330 - 1,000 VAC/700 - 2,300 VDC, for PFC & AC Filter Lifetime Expectancy/Failure Quota Graphs Hot Spot Temperature [°C] Lifetime curve C44P_R Voltage Ratio V/VRMS 1.40 1.30 ≤60°C 1.20 70°C 1.10 1.00 Power Losses and Hot Spot Temperature Calculation At each frequency, the Power Losses are the sum of: 1. Dielectric Power Losses PD(fi) = 2 * π * fi* C * V(fi)2* tgδ0 which can be alternatively calculated as PD(fi) = 75°C 0.90 0.80 80°C 0.70 0.
PAGE 6
Aluminum Can Power Film Capacitors C44P-R, 330 - 1,000 VAC/700 - 2,300 VDC, for PFC & AC Filter Marking KEMET C44PLGR6400RASJ 400µF±5% Urms = 330V~ lrms = 55A 50/60Hz -25/70/56 PROTECTED 10000AFC SH NO PCBs BJ1 17340275 ® Manufacturer Logo Part Number Rated Capacitance and Tolerance Rated Voltage Rated Current and Frequencies Climatic Category UL Approvals Self-Healing Dielectric, UL Logo Production Date and Batch Number Environmental Compliance As a leading global supplier of electronic components and
PAGE 7
Aluminum Can Power Film Capacitors C44P-R, 330 - 1,000 VAC/700 - 2,300 VDC, for PFC & AC Filter Materials & Environment The selection of raw materials that KEMET uses for the production of its electronic components is the result of extensive experience. KEMET directs specific attention toward environmental protection. KEMET selects its suppliers according to ISO 9001 standards and performs statistical analyses on raw materials before acceptance for use in manufacturing our electronic components.
PAGE 8
Aluminum Can Power Film Capacitors C44P-R, 330 - 1,000 VAC/700 - 2,300 VDC, for PFC & AC Filter KEMET Electronics Corporation Sales Oﬃces For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.