Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Overview Applications The C4AQ capacitor is a polypropylene metallized film capacitor with a rectangular, plastic box-type design (white or grey in color) filled with resin, and uses 2 or 4 tinned wires. Typical applications include DC filtering, DC link, power electronics, energy storage, renewable energy grid interface, motor drives, and automotive applications.
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Dimensions – Millimeters T T L H S 0.5 LL F 0.5 S1 p p p1 2-pin 4-pin Size Code S S1 Digit 6 Digit 14 Nominal Tolerance Nominal B W 27.5 ±0.4 - T Tolerance Nominal - 11.0 H L LL F Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance +0.3/−0.7 20.0 +0.2/−0.7 31.5 +0.5/−0.
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Qualification Reference Standards Climatic Category IEC 61071, EN 61071, VDE0560 55/105/56 according to IEC 60068-1 Automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council.
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Electrical Characteristics Rated Capacitance Range Rated Voltage (VNDC) Range Capacitance Tolerance Dissipation Factor PP Typical (tgδ0) Surge Voltage Overvoltage (IEC 61071) Peak Non-Repetitive Current Insulation Resistance Capacitance Deviation in Operation Temperature Storage Storage time Permissible Relative Humidity - Storage 1 to 210 µF 500 to 1
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Test Method Test Voltage Between Terminals 1.5 * VNDC for 10 seconds or 1.65 * VNDC for 2 seconds, at T = +25°C ±5°C Test Voltage Between Terminals and Case 3.2 k VAC 50 Hz for 2 seconds Damp Heat IEC 60068-2-78 Change of Temperature IEC 60068-2-14 Biased Humidity Test 40°C/93% R.H.
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Typical Waveforms VNDC / VPK+ V VPK- t VNDC / VPK+ VPK- V t VNDC / VPK+ VPK- V t The applied peak-to-peak ripple voltage shall not exceed 0.1 x VNDC . The peak voltage shall not exceed the rated voltage VNDC . © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Life Expectancy/Failure Quota Graphs Lifetime Curve at Hot Spot Temperature - VNDC = 500 VDC 1,000,000 Lifetime Expectancy (h) 100,000 10,000 1,000 125 °C 115 °C 110°C 105 °C 95 °C 85 °C 70 °C 100 10 200 300 400 500 600 Voltage (V) Lifetime Curve at Hot Spot Temperature - VNDC = 650 VDC 1,000,000 Lifetime Expectancy (h) 100,000 10,000
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Life Expectancy/Failure Quota Graphs cont.
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Life Expectancy/Failure Quota Graphs cont.
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Life Expectancy/Failure Quota Graphs cont.
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Life Expectancy/Failure Quota Graphs cont.
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Life Expectancy/Failure Quota Graphs cont.
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Environmental Compliance As a leading global supplier of electronic components and an environmentally conscious company, KEMET continually aspires to improve the environmental effects of our manufacturing processes and our finished electronic components.
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Table 1 – Ratings & Part Number Reference Cap Value VDC (µF) Dimensions (mm) T H L S S1 dV/dt Ipkr ESL ESR 70°C at 10 kHz V/µs nH mΩ Apk Irms* 70°C at 10 kHz Arms Rth (HS/Amb) Packaging Quantity (°C/W) PART NUMBER VNDC at 70°C = 500 VDC; VOP85 at 85°C = 450 VDC; VOP105 at 105°C = 350 VDC 5.6 10 12.
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Table 1 – Ratings & Part Number Reference cont. Cap Value VDC (µF) Dimensions (mm) T H L S S1 dV/dt Ipkr ESL ESR 70°C at 10 kHz V/µs nH mΩ Apk Irms* 70°C at 10 kHz Arms Rth (HS/Amb) Packaging Quantity (°C/W) PART NUMBER VNDC at 70°C = 1,100 VDC; VOP85 at 85°C = 900 VDC; VOP105 at 105°C = 700 VDC 1.5 2.7 3.
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Table 2 – Ratings & Part Number Reference for Low Profile Design Cap Value VDC (µF) Dimensions (mm) T H L S S1 dV/dt Ipkr ESL ESR 70°C at 10 kHz V/µs nH mΩ Apk Irms* 70°C at 10 kHz Arms Rth (HS/Amb) Packaging Quantity (°C/W) PART NUMBER VNDC at 70°C = 500 VDC; VOP85 at 85°C = 450 VDC; VOP105 at 105°C = 350 VDC 5.
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAuCu (SAC) alloys, or SnCu alloys, as the primary solder material. This has increased the liquidus temperature from 183°C for a SnPb eutectic alloy to 217 – 221°C for new alloys.
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Soldering Process cont. Wave Soldering Recommendations cont. 1.
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Mounting Resistance to Vibration and Mechanical Shock AEC-Q200 Mechanical Stress Tests: Mechanical Shock Vibration MIL-SDT-202 Method 213 Test condition C Peak value 100 g, duration 6 ms, half-sine-wave (see MIL-HDBK for details) MIL-SDT-202 Method 204 5 g for 20 minutes, 12 cycles each of 3 orientations Use 8"X5" PCB, .031" thick.
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) Construction cont.
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ, Radial, 2 or 4 Leads, 500 - 1,500 VDC, for DC Link (Automotive Grade) KEMET Electronics Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.