Datasheet

ManualsBrandsKEMET ManualsCapacitorsIndustrial Grade SMD Ceramic Capacitor C0G 22nF 250VAC 2220

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard KEM_C1099_250_VAC_SMD • 11/19/2019

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

One world. One KEMET

Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)

250 VAC Non-Safety Rated AC Capacitors CAN series

(Industrial Grade)

Overview

KEMET’s CAN series are non-safety rated ceramic

capacitors designed for 250 VAC applications where

higher CV values are required but not available in

safety certied MLCCs. These capacitors are qualied

for continuous use under AC line conditions of 250

VAC 50/60 Hz. Available in a variety of case sizes and

industry leading CV values (capacitance/voltage), these

devices exhibit low leakage current and low ESR at high

frequencies.

For added reliability, KEMET's exible termination

technology is an available option that provides superior

ex performance over standard termination systems.

This series is available in X7R and C0G dielectrics. X7R

exhibits a predictable change in capacitance with respect

to time and voltage, and boasts a minimal change in

capacitance with reference to ambient temperature.

C0G exhibits no change in capacitance with respect

to time and voltage and boasts a negligible change in

capacitance with reference to ambient temperature. CAN

series is specically designed and tested for 50/60 Hz line

frequencies and other non-safety critical applications.

Benets

• Continuous AC voltage rating 250 VAC, 50/60 Hz

• Offers more than 50x capacitance versus Safety Rated MLCCs

• Base metal electrode (BME) dielectric system

• −55°C to +125°C operating temperature range

• Low ESR and ESL

• Lead (Pb)-free, RoHS, and REACH Compliant

• Temperature stable dielectric

• Non-polar device, minimizing installation concerns

• 100% pure matte tin-plated termination nish allowing for

excellent solderability

• Flexible termination option available upon request

Applications

• AC-DC converters

• AC ltering

• Power factor correction

• Power supply

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (19 pages)

PAGE 1
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) 250 VAC Non-Safety Rated AC Capacitors CAN series (Industrial Grade) Overview KEMET’s CAN series are non-safety rated ceramic capacitors designed for 250 VAC applications where higher CV values are required but not available in safety certified MLCCs. These capacitors are qualified for continuous use under AC line conditions of 250 VAC 50/60 Hz.
PAGE 2
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) 250 VAC Non-Safety Rated AC Capacitors CAN series (Industrial Grade) Typical Performance Capacitance Change vs.
PAGE 3
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) 250 VAC Non-Safety Rated AC Capacitors CAN series (Industrial Grade) Ordering Information CAN Series CAN = Ceramic AC Non-Safety 08 C Case Size Specification/ (L"x W") Series 08 = 0805 12 = 1206 13 = 1210 17 = 1808 18 = 1812 19 = 1825 21 = 2220 22 = 2225 C = Standard X = Flex 103 Capacitance Code (pF) Two single digits and number of zeros.
PAGE 4
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) 250 VAC Non-Safety Rated AC Capacitors CAN series (Industrial Grade) Dimensions – Millimeters (Inches) L W B T S Standard Termination Case Size EIA Size Code Metric Size Code 08 0805 2012 12 1206 3216 13 1210 3225 17 1808 4520 18 1812 4532 19 1825 4564 21 2220 5650 22 2225 5664 L Length W Width T Thickness 2.00 (0.079) ±0.20 (0.008) 3.20 (0.126) ±0.20 (0.008) 3.20 (0.126) ±0.20 (0.008) 4.70 (0.185) ±0.50 (0.
PAGE 5
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) 250 VAC Non-Safety Rated AC Capacitors CAN series (Industrial Grade) Table 1A – X7R Dielectric Capacitance Range/Selection Waterfall Standard and Flexible Terminations Cap Cap Code 2,200 pF 2,700 pF 3,300 pF 3,900 pF 4,700 pF 5,600 pF 6,800 pF 8,200 pF 10,000 pF 12,000 pF 15,000 pF 18,000 pF 22,000 pF 27,000 pF 33,000 pF 39,000 pF 47,000 pF 56,000 pF 62,000 pF 68,000 pF 82,000 pF 0.10 µF 0.12 µF 0.15 µF 0.18 µF 0.22 µF 0.27 µF 0.
PAGE 6
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) 250 VAC Non-Safety Rated AC Capacitors CAN series (Industrial Grade) Table 1B – C0G Dielectric Capacitance Range/Selection Waterfall Standard and Flexible Terminations Case Size/Series Cap Cap Code 1,000 pF 1,100 pF 1,200 pF 1,300 pF 1,500 pF 1,600 pF 1,800 pF 2,000 pF 2,200 pF 2,400 pF 2,700 pF 3,000 pF 3,300 pF 3,600 pF 3,900 pF 4,300 pF 4,700 pF 5,100 pF 5,600 pF 6,200 pF 6,800 pF 7,500 pF 8,200 pF 9,100 pF 10,000 pF 12,000 pF 15,000 pF 18,0
PAGE 7
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) 250 VAC Non-Safety Rated AC Capacitors CAN series (Industrial Grade) Table 2A – Chip Thickness/Tape & Reel Packaging Quantities Plastic Quantity Thickness Code Case Size EIA Size Code Thickness ± Range (mm) 7" Reel 13" Reel DG EJ FZ FU FK FS LE LA LB LC GB GC GE GH GK GN HE HG HJ JE JK JL JN KE KF KH 08 12 13 13 13 13 17 17 17 17 18 18 18 18 18 18 19 19 19 21 21 21 21 22 22 22 0805 1206 1210 1210 1210 1210 1808 1808 1808 1808 1812 1812 1
PAGE 8
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) 250 VAC Non-Safety Rated AC Capacitors CAN series (Industrial Grade) Table 3 – Performance & Reliability: Test Methods & Conditions Stress Reference Test or Inspection Method Shear force per specific case size; Time: 60 ±1 second Terminal Strength AEC–Q200–006 Board Flex AEC–Q200–005 Case Size EIA Size Code Force 08 12 13 ≥ 17 0805 1206 1210 ≥ 1808 10 N 10 N 10 N 18 N Standard termination system - 2.
PAGE 9
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) 250 VAC Non-Safety Rated AC Capacitors CAN series (Industrial Grade) Table 4 – Land Pattern Design Recommendations per IPC–7351 EIA Size Code Metric Size Code 0805 Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) C Y X V1 V2 C Y X V1 V2 C Y X V1 V2 2012 1.00 1.35 1.55 4.40 2.60 0.90 1.15 1.45 3.50 2.
PAGE 10
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) 250 VAC Non-Safety Rated AC Capacitors CAN series (Industrial Grade) Soldering Process Recommended Soldering Technique: • Solder wave or solder reflow for EIA case sizes 0805 and 1206 • All other EIA case sizes are limited to solder reflow only Recommended Reflow Soldering: KEMET’s family of surface mount multilayer ceramic capacitors (SMD MLCCs) are compatible with wave (single or dual), convection, IR, or vapor phase reflow techniques.
PAGE 11
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) 250 VAC Non-Safety Rated AC Capacitors CAN series (Industrial Grade) Construction – Standard Termination Detailed Cross Section Dielectric Material* Shield Electrodes (Ni) Dielectric Barrier Layer Material* (Ni) End Termination/ External Electrode Termination Finish (Cu) (100% Matte Sn) Inner Electrodes (Ni) Shield Electrodes End Termination/ (Ni) External Electrode (Cu) Barrier Layer (Ni) * Dielectric Material C0G: CaZrO3 X7R: BaTiO3 Inner El
PAGE 12
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) 250 VAC Non-Safety Rated AC Capacitors CAN series (Industrial Grade) Capacitor Marking (Optional): These surface mount multilayer ceramic capacitors are normally supplied unmarked. If required, they can be marked as an extra cost option. Marking is available on most KEMET devices, but must be requested using the correct ordering code identifier(s).
PAGE 13
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) 250 VAC Non-Safety Rated AC Capacitors CAN series (Industrial Grade) Capacitor Marking (Optional) cont. Capacitance (pF) For Various Alpha/Numeral Identifiers Numeral Alpha Character 9 A 0.10 1.0 10 100 1,000 10,000 B 0.11 1.1 11 110 1,100 11,000 C 0.12 1.2 12 120 1,200 12,000 D 0.13 1.3 13 130 1,300 E 0.15 1.
PAGE 14
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) 250 VAC Non-Safety Rated AC Capacitors CAN series (Industrial Grade) Tape & Reel Packaging Information KEMET offers multilayer ceramic chip capacitors packaged in 8, 12 and 16 mm tape on 7" and 13" reels in accordance with EIA Standard 481. This packaging system is compatible with all tape-fed automatic pick and place systems. See Table 2 for details on reeling quantities for commercial chips.
PAGE 15
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) 250 VAC Non-Safety Rated AC Capacitors CAN series (Industrial Grade) Figure 1 – Embossed (Plastic) Carrier Tape Dimensions P2 T T2 ØD0 (10 pitches cumulative tolerance on tape ±0.2 mm) P0 A0 E1 F K0 B1 S1 W E2 B0 P1 T1 Center Lines of Cavity ØD1 Cover Tape B1 is for tape feeder reference only, including draft concentric about B0.
PAGE 16
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) 250 VAC Non-Safety Rated AC Capacitors CAN series (Industrial Grade) Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 kg minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.
PAGE 17
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) 250 VAC Non-Safety Rated AC Capacitors CAN series (Industrial Grade) Figure 5 – Reel Dimensions Full Radius, See Note W3 (Includes flange distortion at outer edge) Access Hole at Slot Location (Ø 40 mm minimum) W2 D A (See Note) N C (Arbor hole diameter) B (see Note) (Measured at hub) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.
PAGE 18
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) 250 VAC Non-Safety Rated AC Capacitors CAN series (Industrial Grade) Figure 6 – Tape Leader & Trailer Dimensions Embossed Carrier Punched Carrier 8 mm & 12 mm only END Carrier Tape Round Sprocket Holes START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) Trailer 160 mm minimum Components 100 mm minimum leader 400 mm minimum Top Cover Tape Figure 7 – Maximum Camber Elongated Sprocket Holes (32 mm & wider tapes) Carrier Tap
PAGE 19
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) 250 VAC Non-Safety Rated AC Capacitors CAN series (Industrial Grade) KEMET Electronics Corporation Sales Oﬃces For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.