Datasheet

ManualsBrandsKEMET ManualsCapacitorsMultilayer Ceramic Safety Certified High Temperature Chip Capacitor X7R 4.7nF 250VAC 1812

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard C1100_CAS_SMD • 11/1/2019

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

One world. One KEMET

Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)

Safety Certied, CAS, Surface Mount

X1/Y2 250 VAC, X2 250 VAC (Industrial Grade)

Overview

KEMET’s CAS surface mount safety certied capacitors

are specically designed for interference-suppression

AC line ltering applications. When comparing to radial

leaded disc capacitors, the CAS surface mount form

factor provides engineers the ability to miniaturize

their designs with a higher density solution. Having

internationally recognized safety certications, these

capacitors are well-suited for applications that require

keeping potentially disruptive or damaging line transients

and EMI out of susceptible equipment. They are also an

ideal solution when needing to suppress line disturbances

at the source.

Safety Certied Capacitors are classied as either X and/or

Y capacitors. Class X capacitors are primarily used in line-to

line (across-the-line) applications. Should the capacitor

fail in this application, there is no danger of electric shock

to humans but could result in a risk of re. The Class Y

capacitor is primarily used in line-to-ground (line by-pass)

applications. In this application, failure of the capacitor

could lead to danger of electric shock.

With a working voltage of 250 VAC in line-to-line (Class

X) and 250 VAC in line-to-ground (Class Y) applications,

these safety capacitors meet the impulse test criteria

outlined in IEC Standard 60384. Meeting subclass X1 and

Y2 requirements, these devices are certied to withstand

impulses up to 5 KV (X1/Y2) and 2.5 KV (X2) respectively.

Benets

• Safety Certied to IEC 60384-14

• Class X1/Y2, X2

• 250 VAC rating

• 2.5 kV and 5 kV Impulse Voltages

• Reliable operation up to 125°C

• Available in C0G and X7R Dielectrics

• Case sizes 1808, 1812, 2211, and 2220

• Capacitance offerings ranging from 3.0 pF to 22 nF

• Available capacitance tolerances from ±0.5 pF to ±20%

• RoHS compliant

Applications

Typical applications include:

• Line-to-line (Class X) ltering

• Line-to-ground (Class Y) ltering

• Antenna coupling

• Primary and secondary coupling

(switching power supplies)

• Line disturbances suppression (motors and motor

controls, relays, switching power supplies, and inverters)

Metal Enclosure Ground

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (17 pages)

PAGE 1
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Safety Certified, CAS, Surface Mount X1/Y2 250 VAC, X2 250 VAC (Industrial Grade) Overview KEMET’s CAS surface mount safety certified capacitors are specifically designed for interference-suppression AC line filtering applications. When comparing to radial leaded disc capacitors, the CAS surface mount form factor provides engineers the ability to miniaturize their designs with a higher density solution.
PAGE 2
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Safety Certified, CAS, Surface Mount X1/Y2 250 VAC, X2 250 VAC (Industrial Grade) Ordering Information CAS 17 C 471 Case Size Specification/ (L"x W") Series Type CAS = AC Safety Rated 17 = 1808 18 = 1812 21 = 2220 26 = 2211 C K Capacitance Code (pF) A G F C Capacitance AC Rated Subclass Dielectric Tolerance Voltage Designation D = ±0.5 pF F = ±1% G = ±2% J = ±5% K = ±10% M = ±20% Two significant digits + number of zeros.
PAGE 3
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Safety Certified, CAS, Surface Mount X1/Y2 250 VAC, X2 250 VAC (Industrial Grade) Environmental Compliance These devices are RoHS compliant. They meet all requirements set forth by EU RoHS directives. Table 1A – Product Ordering Codes & Ratings – X1/Y2 C0G Case Size Capacitance Capacitance Code 1808 Class X1/Y2 Peak Impulse Voltage 5,000 V Capacitance Tolerance 3.0 pF 3.3 pF 3.9 pF 4.0 pF 4.7 pF 5.0 pF 5.6 pF 6.0 pF 6.8 pF 7.0 pF 8.
PAGE 4
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Safety Certified, CAS, Surface Mount X1/Y2 250 VAC, X2 250 VAC (Industrial Grade) Table 1B – Product Ordering Codes & Ratings – X1/Y2 X7R Case Size Capacitance 100 pF 120 pF 150 pF 180 pF 220 pF 270 pF 330 pF 390 pF 470 pF 560 pF 680 pF 820 pF 1,000 pF 1,200 pF 1,500 pF 1,800 pF 2,200 pF 2,700 pF 3,300 pF 3,900 pF 4,700 pF Capacitance Code 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 1808 1812 2211 Cl
PAGE 5
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Safety Certified, CAS, Surface Mount X1/Y2 250 VAC, X2 250 VAC (Industrial Grade) Table 1C – Product Ordering Codes & Ratings – X2 C0G Case Size Capacitance Capacitance Code 1808 Class X2 Peak Impulse Voltage 2,500V Capacitance Tolerance 3.0 pF 4.0 pF 5.0 pF 6.0 pF 7.0 pF 8.0 pF 9.
PAGE 6
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Safety Certified, CAS, Surface Mount X1/Y2 250 VAC, X2 250 VAC (Industrial Grade) Table 1D – Product Ordering Codes & Ratings – X2 X7R Case Size Capacitance Capacitance Code 1808 Class X2 Peak Impulse Voltage 2,500V Capacitance Tolerance 150 pF 180 pF 220 pF 270 pF 300 pF 330 pF 390 pF 470 pF 560 pF 680 pF 720 pF 820 pF 1,000 pF 1,200 pF 1,500 pF 1,800 pF 2,200 pF 2,700 pF 3,300 pF 3,900 pF 4,700 pF 5,600 pF 0.010 uF 0.012 uF 0.015 uF 0.
PAGE 7
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Safety Certified, CAS, Surface Mount X1/Y2 250 VAC, X2 250 VAC (Industrial Grade) Table 2 – Chip Thickness/Tape & Reel Packaging Quantities Case Size 1808 1812 2211 2220 Thickness Code Thickness Range (mm) Plastic Quantity AF AG AK BD BG BK BM CG CK CM CU DK DM DU 1.40±0.15 1.60±0.20 2.00±0.20 1.25±0.10 1.60±0.20 2.00±0.20 2.50±0.30 1.60±0.20 2.00±0.20 2.50±0.30 2.80±0.30 2.00±0.20 2.50±0.30 2.80±0.
PAGE 8
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Safety Certified, CAS, Surface Mount X1/Y2 250 VAC, X2 250 VAC (Industrial Grade) Soldering Process Recommended Reflow Soldering Profile KEMET’s family of surface mount multilayer ceramic capacitors (SMD MLCCs) are compatible with wave (single or dual), convection, IR or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress.
PAGE 9
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Safety Certified, CAS, Surface Mount X1/Y2 250 VAC, X2 250 VAC (Industrial Grade) Table 4 – Performance & Reliability: Test Methods and Conditions Item Standard Specification Requirements Visual examination and Dimensions IEC 60384–1 4.1 No remarkable defect. Dimensions to conform to individual specification sheet. Capacitance IEC 60384–1 4.2.2 Capacitance is within specified tolerance Dissipation Factor (DF) or Q IEC 60384–1 4.2.
PAGE 10
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Safety Certified, CAS, Surface Mount X1/Y2 250 VAC, X2 250 VAC (Industrial Grade) Table 4 – Performance & Reliability: Test Methods and Conditions cont. Item Standard Passive Flammability IEC 60384–14 4.17 IEC 60384–1 4.38 Active Flammability Endurance Resistance to Flexure of Substrate IEC 60384–21/22 4.18 IEC 60384–14 4.14 Specification Volume sample: 21.
PAGE 11
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Safety Certified, CAS, Surface Mount X1/Y2 250 VAC, X2 250 VAC (Industrial Grade) Storage & Handling Ceramic chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage.
PAGE 12
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Safety Certified, CAS, Surface Mount X1/Y2 250 VAC, X2 250 VAC (Industrial Grade) Marking Subclass Designation X1/Y2 X2 KEMET ID Marking KF KG KEMET ID © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.
PAGE 13
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Safety Certified, CAS, Surface Mount X1/Y2 250 VAC, X2 250 VAC (Industrial Grade) Tape & Reel Packaging Information KEMET offers multilayer ceramic chip capacitors packaged in 8, 12, 16 and 24 mm tape on 7" and 13" reels in accordance with EIA Standard 481. This packaging system is compatible with all tape-fed automatic pick and place systems. See Table 2 for details on reeling quantities for commercial chips.
PAGE 14
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Safety Certified, CAS, Surface Mount X1/Y2 250 VAC, X2 250 VAC (Industrial Grade) Figure 1 – Embossed (Plastic) Carrier Tape Dimensions P2 T T2 ØD0 P0 (10 pitches cumulative tolerance on tape ±0.2 mm) A0 E1 F K0 B1 S1 W E2 B0 P1 T1 Center Lines of Cavity ØD1 Cover Tape B1 is for tape feeder reference only, including draft concentric about B0.
PAGE 15
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Safety Certified, CAS, Surface Mount X1/Y2 250 VAC, X2 250 VAC (Industrial Grade) Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 kg minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 Newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.3 Newton (10 to 130 gf) 24 mm 0.1 to 1.
PAGE 16
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Safety Certified, CAS, Surface Mount X1/Y2 250 VAC, X2 250 VAC (Industrial Grade) Figure 5 – Reel Dimensions Full Radius, See Note W3 (Includes flange distortion at outer edge) Access Hole at Slot Location (Ø 40 mm minimum) W2 D A (See Note) N C (Arbor hole diameter) B (see Note) (Measured at hub) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.
PAGE 17
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Safety Certified, CAS, Surface Mount X1/Y2 250 VAC, X2 250 VAC (Industrial Grade) KEMET Electronics Corporation Sales Oﬃces For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.