Datasheet

ManualsBrandsKEMET ManualsCapacitorsHiQ-CBR Ceramic Capacitor, MLCC, RF 22pF, 50VDC, 0402, ±5 %

One world. One KEMET

Benets

• High Q and low ESR

• High SRF

• High thermal stability

• 1 MHz to 50 GHz frequency range

• Operatingtemperaturerangeof−55°Cto+125°C

• Base metal electrode (BME) dielectric system

• Pb-free and RoHS compliant

• 0201, 0402, 0603, and 0805 case sizes (inches)

• DC voltage ratings of 6.3 V, 10 V, 25 V, 50 V, 100 V, 200 V,

250 V, and 500 V

• Capacitance offerings ranging from 0.1 pF up to 100 pF

Overview

KEMET’s CBR Series surface mount multilayer ceramic

capacitors (MLCCs) in C0G dielectric feature a robust and

exceptionally stable copper electrode dielectric system

that offers excellent low loss performance (high Q). These

devices provide extremely low ESR and high self-resonance

characteristics, and are well-suited for resonant circuit

applications or those where Q and stability of capacitance

characteristics are required. CBR Series capacitors

exhibit no change in capacitance with respect to time and

voltage, and boast a negligible change in capacitance with

reference to ambient temperature. Capacitance change is

limitedto±30ppm/ºCfrom−55°Cto+125°C.

CBR Series devices are suitable for many circuit applications

includingRFpowerampliers,mixers,oscillators,lownoise

ampliers,lternetworks,antennatuning,timingcircuits,

delay lines, and MRI imaging coils.

Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications

HiQ-CBR Series, C0G Dielectric, Low ESR

6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave)

Ordering Information

CBR 02 C 330 F 9 G A C

Series

Case Size

(L"x W" )

Specication/

Series

Capacitance

Code (pF)

Capacitance

Tolerance

Rated

Voltage

(VDC)

Dielectric

Termination

Style

Termination Finish

Packaging/

Grade

(C-Spec)

CBR 02 = 0201

04 = 0402

06 = 0603

08 = 0805

C = Standard Twosignicantdigits

+numberofzeros

Use 9 for 1.0 – 9.9 pF

Use 8 for 0.1 – 0.99 pF

e.g., 2.2 pF = 229

e.g., 0.5 pF = 508

A = ±0.05 pF

B = ±0.1 pF

C = ±0.25 pF

D = ±0.5 pF

F = ±1%

G = ±2%

J = ±5%

9 = 6.3 V

8 = 10 V

3 = 25 V

5 = 50 V

1 = 100 V

2 = 200 V

A = 250 V

C = 500 V

G = C0G A = N/A C = 100% Matte Sn Blank =

7" Reel

Unmarked

When ordering CBR Series devices, a "sufx" or "C-Spec" is not required to indicate a 7" reel packaging option. CBR devices are only available and

shipped on 7" reels (paper tape). Bulk bag and cassette packaging options are not available. Please contact KEMET if you have a specic, non-standard

packaging requirement.

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (18 pages)

PAGE 1
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave) Overview KEMET’s CBR Series surface mount multilayer ceramic capacitors (MLCCs) in C0G dielectric feature a robust and exceptionally stable copper electrode dielectric system that offers excellent low loss performance (high Q).
PAGE 2
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave) Benefits cont'd • Available capacitance tolerances of ±0.05 pF, ±0.1 pF, ±0.25 pF, ±0.
PAGE 3
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave) Dimensions – Millimeters (Inches) W L T B Case Size (in.) Case Size (mm) L Length W Width T Thickness B Bandwidth 0201 0603 0402 1005 0603 1608 0805 2012 0.60±0.03 (0.024±0.001) 1.00±0.05 (0.040±0.002) 1.60±0.10 (0.063±0.004) 2.00±0.20 (0.079±0.008) 0.30±0.03 (0.012±0.001) 0.50±0.05 (0.020±0.002) 0.80±0.10 (0.031±0.
PAGE 4
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave) Dielectric Withstanding Voltage Table Rated Voltage (VDC) ≤100 V 200 V 250 V 500 V DWV 250% 200% 200% 150% Electrical Characteristics SRF (MHz) vs. Cap (pF) 100,000 0201 SRF (MHz) 0402 0603 10,000 0805 1,000 100 0.1 1 Cap (pF) 10 100 © KEMET Electronics Corporation • P.O.
PAGE 5
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave) Electrical Characteristics cont'd Q vs. Frequency 0402 ESR vs. Frequency 0402 10,000 1 1.8pF 1,000 4.7pF 4.7pF 10pF 0.1 18pF Q ESR (Ohms) 1.8pF 10pF 100 18pF 22pF 22pF 10 0.01 100 1,000 Freq (MHz) 10,000 1 100 ESR vs. Frequency 0603 10,000 Q vs. Frequency 0603 10,000 1 2.2pF 2.2pF 1,000 4.7pF 4.7pF 10pF 0.
PAGE 6
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave) Table 1 – CBR Series, Capacitance Range Waterfall Case Size – Inches (mm) Length Width Thickness Bandwidth mm (Inches) mm (Inches) mm (Inches) mm (Inches) 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) 0.60 ± 0.03 (0.024 ± 0.001) 0.30 ± 0.03 (0.012 ± 0.001) 0.30 ± 0.03 (0.012 ± 0.001) 0.15 ± 0.05 (0.006 ± 0.002) 1.00 ± 0.05 (0.
PAGE 7
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave) Table 1 – CBR Series, Capacitance Range Waterfall cont'd Case Size – Inches (mm) Length Width Thickness Bandwidth mm (Inches) mm (Inches) mm (Inches) mm (Inches) Rated Voltage (VDC) 6.3 Voltage Code 9 Capacitance Capacitance Tolerance 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) 0.60 ± 0.03 (0.024 ± 0.001) 0.30 ± 0.03 (0.
PAGE 8
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave) Table 1 – CBR Series, Capacitance Range Waterfall cont'd Case Size – Inches (mm) Length Width Thickness Bandwidth mm (Inches) mm (Inches) mm (Inches) mm (Inches) 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) 0.60 ± 0.03 (0.024 ± 0.001) 0.30 ± 0.03 (0.012 ± 0.001) 0.30 ± 0.03 (0.012 ± 0.001) 0.15 ± 0.05 (0.006 ± 0.002) 1.00 ± 0.
PAGE 9
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave) Table 2 – Chip Thickness/Reeling Quantities Chip Size Inches (mm) Chip Thickness (mm) 0201 (0603) 0.30 ±0.03 15,000 0402 (1005) 0.50 ±0.05 10,000 0603 (1608) 0.80 ±0.07 4,000 0805 (2012) 0.85 ±0.10 4,000 Reel Quantity 7" Paper 13" Paper Contact KEMET for availability.
PAGE 10
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications HiQ-CBR Series, C0G Dielectric, Low ESR 6.
PAGE 11
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave) Table 4 – Performance & Reliability: Test Methods & Conditions Stress Test or Inspection Method Requirements Pressurizing force: 0201 case size: 2N 0402 & 0603 case sizes: 5N 0805 case size: 10N Test time: 10±1 second No visible damage or separation of termination system. Vibration frequency: 10 ~ 55 Hz/minimum Total amplitude: 1.
PAGE 12
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications HiQ-CBR Series, C0G Dielectric, Low ESR 6.
PAGE 13
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave) Storage and Handling Ceramic chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage.
PAGE 14
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave) Tape & Reel Packaging Information KEMET offers RF and Microwave Multilayer Ceramic Chip Capacitors packaged in 8 mm tape on 7" reels. This packaging system is compatible with all tape-fed automatic pick and place systems.
PAGE 15
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave) Figure 1 – Punched (Paper) Carrier Tape Dimensions P0 T E P2 A0 D0 F W B0 D1 P1 K1 A0 Table 6 – Punched (Paper) Carrier Tape Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size D0 E1 P0 P2 8 mm 1.55+0.05 (0.061+0.002) 1.55±0.05 (0.061±0.002) 4.0±0.10 (0.157±0.004) 2.0±0.05 (0.079±0.
PAGE 16
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave) Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 Kg minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 Newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.
PAGE 17
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave) Figure 4 – Maximum Camber Carrier Tape Round Sprocket Holes 1 mm maximum, either direction Straight Edge 250 mm Figure 5 – Reel Dimensions C A N W1 Table 7 – Reel Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size Reel Size A C 8 mm 7 178±0.10 (7.008±0.004) 13.0±0.20 (0.512±0.
PAGE 18
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave) KEMET Electronic Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.