Datasheet

17© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 9/9/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
FLEX SUPPRESSOR
®
Noise Suppression Sheet
Applications
Case 1–Suppressingnoisereectedbycasing
Case 2 – Suppressing crosstalk between substrates
Apply directly to casing
(Case 1)
Apply between boards (Case 2)
Case 3 – Suppressing radiation noise from LSI and IC
Apply directly to
top of LSI or IC
(Case 3)
Apply directly to
circuit board line
(Case 3)
Insulation process should be performed when
there is contact to conductive material
Case 4 – Suppressing noise from cables
Wrap FLEX SUPPRESSOR around the cable.
Apply directly to a flat cable.(Case 4)
Case 5–Suppressingnoiseradiation(reectednoise)from
the opening of the shield, the casing, etc.
Attached around opening
(Case 5)
Opening
Suppressing radiation
Shielded casing
High-frequency current on shielded surface