Datasheet

5© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com FS8001_EF • 3/27/2017
Flex Suppressor
®
EF Series
Applications
Case 1–Tosuppressnoisereectedbycasing
Case 2 – To suppress cross talk between substrates
Apply directly to casing
(Case 1)
Apply between boards (Case 2)
Case 3 – To suppress radiation noises from LSI and IC
Apply directly to
top of LSI or IC
(Case 3)
Apply directly to
circuit board line
(Case 3)
Insulation process should be performed when
there is contact to conductive material
Case 4 – To suppress noise from cables
Wrap Flex Suppressor
®
around cable.
Caution: Must be covered with heat shrink
material (Case 4)
Apply directly to flat cable.(Case 4)
Case 5–Tosuppressnoiseradiation(reectednoise)from
the opening of shield, casing, etc.
Attached around opening
(Case 5)
Opening
Suppressing radiation
Shielded casing
High-frequency current on shielded surface