Single-Ended Aluminum Electrolytic Capacitors ESK, +85°C Overview Applications The KEMET ESK single-ended aluminum electrolytic capacitors are designed for high-density printed circuit boards requiring a miniature solution. Typical applications include general purpose coupling, decoupling, bypass, and filtering in consumer electronics.
Single-Ended Aluminum Electrolytic Capacitors – ESK, +85°C Ordering Options Table Diameter Length Packaging Type Lead Type Lead Length (mm) Lead and Packaging Code 20/15 Minimum AA Standard Bulk Packaging Options 4 – 22 All Bulk (bag) Straight Tape & Reel 4–5 4–8 4–8 10 All Tape & Reel Formed to 2.5 mm H0 = 16 ±0.75 LA All Tape & Reel 2.5 mm lead spacing H0 = 18.5 ±0.75 KA All Tape & Reel Formed to 5 mm H0 = 16 ±0.75 JA ≤ 20 Tape & Reel Straight H0 = 18.5 ±0.
Single-Ended Aluminum Electrolytic Capacitors – ESK, +85°C Dimensions – Millimeters TERMINAL END VIEW SIDE VIEW L LL+ D Size Code C3 E3 G3 G7 G4 H9 H2 H4 L2 L3 L4 M7 M1 M2 M3 M4 N5 N1 N2 N3 Q3 Q4 P d LL− D L p d LL+/LL− Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 5.0 6.3 8.0 8.0 8.0 10.0 10.0 10.0 13.0 13.0 13.0 16.0 16.0 16.0 16.0 16.0 18.0 18.0 18.0 18.0 22.0 22.0 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.
Single-Ended Aluminum Electrolytic Capacitors – ESK, +85°C Performance Characteristics Item Performance Characteristics 1 – 22,000 µF Capacitance Range 1 – 470 µF ±20% at 120 Hz/20°C Capacitance Tolerance 6.3 – 100 VDC Rated Voltage 160 – 500 VDC 2,000 hours (see conditions in Test Methods & Performance) Life Test −40°C to +85°C −25°C to +85°C I ≤ 0.01 CV or 3 µA, whichever is greater I = 0.
Single-Ended Aluminum Electrolytic Capacitors – ESK, +85°C Test Method & Performance Conditions Load Life Test Shelf Life Test Temperature 85°C 85°C Test Duration 2,000 hours 1,000 hours Ripple Current Maximum ripple current specified at 120 Hz 85°C No ripple current applied The sum of DC voltage and the peak AC voltage must not exceed the rated voltage of the capacitor.
Single-Ended Aluminum Electrolytic Capacitors – ESK, +85°C Table 1 – Ratings & Part Number Reference Rated Case Size Capacitance D x L (mm) 120 Hz 20°C (µF) DF 120 Hz 20°C (tan δ %)* RC 120 Hz 85°C (mA) LC 20°C 2 minutes (µA) Part Number VDC VDC Surge Voltage 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.
Single-Ended Aluminum Electrolytic Capacitors – ESK, +85°C Table 1 – Ratings & Part Number Reference cont'd Rated Case Size Capacitance D x L (mm) 120 Hz 20°C (µF) DF 120 Hz 20°C (tan δ %)* RC 120 Hz 85°C (mA) LC 20°C 2 minutes (µA) Part Number VDC VDC Surge Voltage 16 16 16 16 16 16 16 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 50 50 50 50 50 50 50 20 20 20 20 20 20 20 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32
Single-Ended Aluminum Electrolytic Capacitors – ESK, +85°C Table 1 – Ratings & Part Number Reference cont'd Rated Case Size Capacitance D x L (mm) 120 Hz 20°C (µF) DF 120 Hz 20°C (tan δ %)* RC 120 Hz 85°C (mA) LC 20°C 2 minutes (µA) Part Number VDC VDC Surge Voltage 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63
Single-Ended Aluminum Electrolytic Capacitors – ESK, +85°C Table 1 – Ratings & Part Number Reference cont'd Rated Case Size Capacitance D x L (mm) 120 Hz 20°C (µF) DF 120 Hz 20°C (tan δ %)* RC 120 Hz 85°C (mA) LC 20°C 2 minutes (µA) Part Number VDC VDC Surge Voltage 100 100 100 100 100 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 250 250 250 250 250 250 250 250 250 125 125
Single-Ended Aluminum Electrolytic Capacitors – ESK, +85°C Table 1 – Ratings & Part Number Reference cont'd Rated Case Size Capacitance D x L (mm) 120 Hz 20°C (µF) DF 120 Hz 20°C (tan δ %)* RC 120 Hz 85°C (mA) LC 20°C 2 minutes (µA) Part Number VDC VDC Surge Voltage 250 250 250 250 250 250 250 250 250 250 250 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 450 450 450 450 450 450 450 300 300
Single-Ended Aluminum Electrolytic Capacitors – ESK, +85°C Table 1 – Ratings & Part Number Reference cont'd Rated Case Size Capacitance D x L (mm) 120 Hz 20°C (µF) DF 120 Hz 20°C (tan δ %)* RC 120 Hz 85°C (mA) LC 20°C 2 minutes (µA) Part Number VDC VDC Surge Voltage 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 550 550 550 550 550 550 550 550 6.8 10 10 22 22 22 33 33 47 47 47 68 100 100 150 2.
Single-Ended Aluminum Electrolytic Capacitors – ESK, +85°C Mounting Positions (Safety Vent) In operation, electrolytic capacitors will always conduct a leakage current, which causes electrolysis. The oxygen produced by electrolysis will regenerate the dielectric layer but, at the same time, the hydrogen released may cause the internal pressure of the capacitor to increase. The overpressure vent, or safety vent, ensures that the gas can escape when the pressure reaches a certain value.
Single-Ended Aluminum Electrolytic Capacitors – ESK, +85°C Application and Operation Guidelines Electrical Ratings: Capacitance (ESC) Simplified equivalent circuit diagram of an electrolytic capacitor The capacitive component of the equivalent series circuit, (equivalent series capacitance - ESC), is determined by applying an alternate voltage of ≤ 0.5 V at a frequency of 120 or 100 Hz and 20°C (IEC 384-1, 384-4).
Single-Ended Aluminum Electrolytic Capacitors – ESK, +85°C Equivalent Series Inductance (ESL) Equivalent series inductance or self inductance results from the terminal configuration and internal design of the capacitor. Capacitor Equivalent Internal Circuit Equivalent Series Capacitance (ESC) Equivalent Series Resistance (ESR) Equivalent Series Inductance (ESL) Co Re L Equivalent Series Resistance (ESR) Equivalent series resistance is the resistive component of the equivalent series circuit.
Single-Ended Aluminum Electrolytic Capacitors – ESK, +85°C Impedance (Z) cont’d Z [ohm ] 1,000 100 1/ω ω Ce 10 B Re 1 0.1 ωL A 1/ω ω Co 0.1 1 10 C 100 1,000 10,000 F [K Hz] • Capacitive reactance predominates at low frequencies.
Single-Ended Aluminum Electrolytic Capacitors – ESK, +85°C Leakage Current (LC) Due to the aluminum oxide layer that serves as a dielectric, a small current will continue to flow even after a DC voltage has been applied for long periods. This current is called leakage current. A high leakage current flows after applying voltage to the capacitor then decreases in a few minutes, for example, after prolonged storage without any applied voltage.
Single-Ended Aluminum Electrolytic Capacitors – ESK, +85°C Frequency Dependence of the Ripple Current ESR and, thus, the tan δ depend on the frequency of the applied voltage. This indicates that the allowed ripple current is also a function of the frequency. Temperature Dependence of the Ripple Current The data sheet specifies maximum ripple current at the upper category temperature for each capacitor.
Single-Ended Aluminum Electrolytic Capacitors – ESK, +85°C Packaging Quantities Size Code Diameter (mm) Length (mm) C3 5.0 6.3 8.0 8.0 10.0 10.0 10.0 13.0 13.0 13.0 16.0 16.0 16.0 16.0 18.0 18.0 18.0 18.0 22.0 22.0 E3 G3 G4 H9 H2 H4 L2 L3 L4 M7 M2 M3 M4 N5 N1 N2 N3 Q3 Q4 Bulk Auto-insertion Standard Leads Cut Leads Ammo Tape & Reel 11.0 11.0 11.0 15.0 12.5 15.0 20.0 16.0 20.
Single-Ended Aluminum Electrolytic Capacitors – ESK, +85°C Marking KEMET Logo Polarity Stripe (−) Rated Capacitance Rated Voltage (VDC) Date Code Series, Rated Temperature Month*/Year* Manufacturing Internal Codes *Y = Year Code 01 02 03 04 05 06 07 08 09 Year 2011 2012 2013 2014 2015 2016 2017 2018 2019 *M = Month Code 01 02 03 04 05 06 07 08 09 10 11 12 Month 1 2 3 4 5 6 7 8 9 10 11 12 Construction Insulating End Disc Insulating Sleeve Lead Aluminum Can
Single-Ended Aluminum Electrolytic Capacitors – ESK, +85°C Taping for Automatic Insertion Machines Formed to 5 mm (Lead and packaging code JA and DA) +1.0 -1.0 P D L 1.0 Maximum P0 Straight Leads (Diameter: 4 – 8 mm) Lead and packaging code EA and KA P2 P2 1.0 Maximum P1 +0.5 Formed to 2.5 mm 4 5 4 5 Formed to 5 mm 6 8 4 5 Straight leads 6 8 10 p d d +0.8/−0.2 ±0.05 5–7 ≤7 >7 5–7 ≤7 >7 ≤7 >7 ≤7 >7 5–7 ≤7 >7 ≤7 >7 ≤7 >7 ≤ 20 2.5 2.5 2.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 1.5 2.0 2.0 2.5 2.
Single-Ended Aluminum Electrolytic Capacitors – ESK, +85°C Lead Taping & Packaging Ammo Box Reel D H T Diameter 4 5 5 6.3 6.
Single-Ended Aluminum Electrolytic Capacitors – ESK, +85°C Construction Data The manufacturing process begins with the anode foil being electrochemically etched to increase the surface area and then “formed” to produce the aluminum oxide layer. Both the anode and cathode foils are then interleaved with absorbent paper and wound into a cylinder. During the winding process, aluminum tabs are attached to each foil to provide the electrical contact.
Single-Ended Aluminum Electrolytic Capacitors – ESK, +85°C KEMET Electronics Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.