Single-Ended Aluminum Electrolytic Capacitors ESL, +105°C Overview Applications The KEMET ESL single-ended aluminum electrolytic capacitors are designed for high reliability and long life (up to 10,000 hours) applications. Typical applications include LED drive source.
Single-Ended Aluminum Electrolytic Capacitors – ESL, +105°C Ordering Options Table Diameter Packaging Type Lead Type Lead Length (mm) Lead and Packaging Code Standard Bulk Packaging Options 4 – 22 Bulk (bag) Straight 20/15 Minimum AA Standard Auto-Insertion Packaging Options 10 – 13 16 – 18 Ammo 5 mm lead spacing H0 = 18.5±0.75 EA Ammo 7.5 mm lead spacing H0 = 18.5±0.75 EA Other Packaging Options 4–8 4–8 4–5 Ammo Formed to 5 mm H0 = 16±0.75 DA Ammo Straight H0 = 18.5±0.
Single-Ended Aluminum Electrolytic Capacitors – ESL, +105°C Dimensions – Millimeters TERMINAL END VIEW SIDE VIEW L LL+ D Size Code C3 E3 GM G9 G8 G6 GG H9 H8 H4 H5 HB HE K7 K5 K1 K2 K3 K4 KB M5 M7 M9 MP M4 N5 N8 NA N3 P d LL− D L p d LL+/LL- Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 5.0 6.3 8.0 8.0 8.0 8.0 8.0 10.0 10.0 10.0 10.0 10.0 10.0 12.5 12.5 12.5 12.5 12.5 12.5 12.5 16.0 16.0 16.0 16.0 16.0 18.0 18.0 18.0 18.0 ±0.5 ±0.5 ±0.5 ±0.
Single-Ended Aluminum Electrolytic Capacitors – ESL, +105°C Performance Characteristics Item Performance Characteristics Capacitance Range Capacitance Tolerance 0.47 – 6,800 µF ±20% at 120 Hz/20°C 16 – 100 VDC Rated Voltage Life Test Operating Temperature Leakage Current 160 – 450 VDC 8,000 – 10,000 hours (see conditions in Test Methods & Performance) −40°C to +105°C I ≤ 0.01 CV or 3 µA, whichever is greater I ≤ 0.02 CV +10 µA C = rated capacitance (µF), V = rated voltage (VDC).
Single-Ended Aluminum Electrolytic Capacitors – ESL, +105°C Shelf Life The capacitance, ESR and impedance of a capacitor will not change significantly after extended storage periods, however, the leakage current will very slowly increase. KEMET's E aluminum electrolytic capacitors should not be stored in high temperatures or where there is a high level of humidity. The suitable storage condition for KEMET's E aluminum electrolytic capacitors is +5 to +35°C and less than 75% in relative humidity.
Single-Ended Aluminum Electrolytic Capacitors – ESL, +105°C Table 1 – Ratings & Part Number Reference VDC VDC Surge Voltage Rated Capacitance 120 Hz 20°C (µF) Case Size D x L (mm) DF 120 Hz 20°C (tan δ %)* RC 100 kHz 105°C (mA) ESR 100 kHz 20°C (Ω) LC 20°C 2 Minutes (µA) Part Number 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 25 25 25 25 25 25 25 25 25 25 25 25 25 25 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 2
Single-Ended Aluminum Electrolytic Capacitors – ESL, +105°C Table 1 – Ratings & Part Number Reference cont'd VDC VDC Surge Voltage Rated Capacitance 120 Hz 20°C (µF) Case Size D x L (mm) DF 120 Hz 20°C (tan δ %)* RC 100 kHz 105°C (mA) ESR 100 kHz 20°C (Ω) LC 20°C 2 Minutes (µA) Part Number 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 32 32 32 32 32 32 32 32 32 32 32 32 32 32
Single-Ended Aluminum Electrolytic Capacitors – ESL, +105°C Table 1 – Ratings & Part Number Reference cont'd VDC VDC Surge Voltage Rated Capacitance 120 Hz 20°C (µF) Case Size D x L (mm) DF 120 Hz 20°C (tan δ %)* RC 100 kHz 105°C (mA) ESR 100 kHz 20°C (Ω) LC 20°C 2 Minutes (µA) Part Number 35 35 35 35 35 35 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 44 44 44 44 44 44 63 63 63 63 63 63 63 63
Single-Ended Aluminum Electrolytic Capacitors – ESL, +105°C Table 1 – Ratings & Part Number Reference cont'd VDC VDC Surge Voltage Rated Capacitance 120 Hz 20°C (µF) Case Size D x L (mm) DF 120 Hz 20°C (tan δ %)* RC 100 kHz 105°C (mA) ESR 100 kHz 20°C (Ω) LC 20°C 2 Minutes (µA) Part Number 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 79 79 79 79 79 79
Single-Ended Aluminum Electrolytic Capacitors – ESL, +105°C Table 1 – Ratings & Part Number Reference cont'd VDC VDC Surge Voltage Rated Capacitance 120 Hz 20°C (µF) Case Size D x L (mm) DF 120 Hz 20°C (tan δ %)* RC 100 kHz 105°C (mA) ESR 100 kHz 20°C (Ω) LC 20°C 2 Minutes (µA) Part Number 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160
Single-Ended Aluminum Electrolytic Capacitors – ESL, +105°C Table 1 – Ratings & Part Number Reference cont'd VDC VDC Surge Voltage Rated Capacitance 120 Hz 20°C (µF) Case Size D x L (mm) DF 120 Hz 20°C (tan δ %)* RC 100 kHz 105°C (mA) ESR 100 kHz 20°C (Ω) LC 20°C 2 Minutes (µA) Part Number 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 350
Single-Ended Aluminum Electrolytic Capacitors – ESL, +105°C Table 1 – Ratings & Part Number Reference cont'd VDC VDC Surge Voltage Rated Capacitance 120 Hz 20°C (µF) Case Size D x L (mm) DF 120 Hz 20°C (tan δ %)* RC 100 kHz 105°C (mA) ESR 100 kHz 20°C (Ω) LC 20°C 2 Minutes (µA) Part Number 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400
Single-Ended Aluminum Electrolytic Capacitors – ESL, +105°C Table 1 – Ratings & Part Number Reference cont'd VDC VDC Surge Voltage Rated Capacitance 120 Hz 20°C (µF) Case Size D x L (mm) DF 120 Hz 20°C (tan δ %)* RC 100 kHz 105°C (mA) ESR 100 kHz 20°C (Ω) LC 20°C 2 Minutes (µA) Part Number 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 50
Single-Ended Aluminum Electrolytic Capacitors – ESL, +105°C Mounting Positions (Safety Vent) In operation, electrolytic capacitors will always conduct a leakage current, which causes electrolysis. The oxygen produced by electrolysis will regenerate the dielectric layer but, at the same time, the hydrogen released may cause the internal pressure of the capacitor to increase. The overpressure vent, or safety vent, ensures that the gas can escape when the pressure reaches a certain value.
Single-Ended Aluminum Electrolytic Capacitors – ESL, +105°C Application and Operation Guidelines Electrical Ratings: Capacitance (ESC) Simplified equivalent circuit diagram of an electrolytic capacitor The capacitive component of the equivalent series circuit, (equivalent series capacitance - ESC), is determined by applying an alternate voltage of ≤ 0.5 V at a frequency of 120 or 100 Hz and 20°C (IEC 384-1, 384-4).
Single-Ended Aluminum Electrolytic Capacitors – ESL, +105°C Equivalent Series Inductance (ESL) Equivalent series inductance or self inductance results from the terminal configuration and internal design of the capacitor. Capacitor Equivalent Internal Circuit Equivalent Series Capacitance (ESC) Equivalent Series Resistance (ESR) Equivalent Series Inductance (ESL) Co Re L Equivalent Series Resistance (ESR) Equivalent series resistance is the resistive component of the equivalent series circuit.
Single-Ended Aluminum Electrolytic Capacitors – ESL, +105°C Impedance (Z) cont’d Z [ohm ] 1,000 100 1/ω ω Ce 10 B Re 1 0.1 ωL A 1/ω ω Co 0.1 1 10 C 100 1,000 10,000 F [K Hz] • Capacitive reactance predominates at low frequencies.
Single-Ended Aluminum Electrolytic Capacitors – ESL, +105°C Leakage Current (LC) Due to the aluminum oxide layer that serves as a dielectric, a small current will continue to flow even after a DC voltage has been applied for long periods. This current is called leakage current. A high leakage current flows after applying voltage to the capacitor then decreases in a few minutes, for example, after prolonged storage without any applied voltage.
Single-Ended Aluminum Electrolytic Capacitors – ESL, +105°C Frequency Dependence of the Ripple Current ESR and, thus, the tan δ depend on the frequency of the applied voltage. This indicates that the allowed ripple current is also a function of the frequency. Temperature Dependence of the Ripple Current The data sheet specifies maximum ripple current at the upper category temperature for each capacitor.
Single-Ended Aluminum Electrolytic Capacitors – ESL, +105°C Packaging Quantities Size Code Diameter (mm) Length (mm) C3 5.0 6.3 8.0 8.0 8.0 8.0 8.0 10.0 10.0 Bulk Auto-insertion Standard Leads Cut Leads Ammo Tape & Reel 11.0 11.0 11.5 12.0 16.0 20.0 50.0 12.5 16.0 10,000 10,000 6,000 6,000 5,000 4,000 2,400 4,000 3,000 15,000 15,000 8,000 8,000 5,000 4,000 2,400 4,000 4,000 2,000 2,000 1,000 1,000 1,000 1,000 700 700 - 20.0 25.0 40.0 50.0 15.0 20.0 25.0 30.0 35.0 40.0 50.0 20.0 25.0 30.
Single-Ended Aluminum Electrolytic Capacitors – ESL, +105°C Marking KEMET Logo Polarity Stripe (−) Rated Capacitance Rated Voltage (VDC) Date Code Series, Rated Temperature Month*/Year* Manufacturing Internal Codes *Y = Year Code 01 02 03 04 05 06 07 08 09 Year 2011 2012 2013 2014 2015 2016 2017 2018 2019 *M = Month Code 01 02 03 04 05 06 07 08 09 10 11 12 Month 1 2 3 4 5 6 7 8 9 10 11 12 Construction Insulating End Disc Insulating Sleeve Lead Aluminum Ca
Single-Ended Aluminum Electrolytic Capacitors – ESL, +105°C Lead Taping & Packaging Ammo Box Reel D H T Diameter 4 5 5 6.3 6.
Single-Ended Aluminum Electrolytic Capacitors – ESL, +105°C Construction Data The manufacturing process begins with the anode foil being electrochemically etched to increase the surface area and then “formed” to produce the aluminum oxide layer. Both the anode and cathode foils are then interleaved with absorbent paper and wound into a cylinder. During the winding process, aluminum tabs are attached to each foil to provide the electrical contact.
Single-Ended Aluminum Electrolytic Capacitors – ESL, +105°C KEMET Electronics Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.
