Datasheet

2© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard A4074_ESL • 4/24/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Single-Ended Aluminum Electrolytic Capacitors – ESL, +105°C
Ordering Options Table
Diameter Packaging Type Lead Type
Lead Length
(mm)
Lead and
Packaging Code
Standard Bulk Packaging Options
4 – 22
Bulk (bag) Straight 20/15 Minimum AA
Standard Auto-Insertion Packaging Options
10 – 13
Ammo 5 mm lead spacing H
0
= 18.5±0.75 EA
16 – 18
Ammo 7.5 mm lead spacing H
0
= 18.5±0.75 EA
Other Packaging Options
4 – 8
Ammo Formed to 5 mm H
0
= 16±0.75 DA
4 – 8
Ammo Straight H
0
= 18.5±0.75 EA
4 – 5
Ammo Formed to 2.5 mm H
0
= 16±0.75 FA
Contact KEMET for other lead and packaging options
Environmental Compliance
As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental
effects of both our capacitors and their production. In Europe (RoHS Directive) and in some other geographical areas like
China, legislation has been put in place to prevent the use of some hazardous materials, such as lead (Pb), in electronic
equipment. All products in this catalog are produced to help our customers’ obligations to guarantee their products and fulll
these legislative requirements. The only material of concern in our products has been lead (Pb), which has been removed
from all designs to fulll the requirement of containing less than 0.1% of lead in any homogeneous material. KEMET will
closely follow any changes in legislation world wide and make any necessary changes in its products, whenever needed.
Some customer segments such as medical, military and automotive electronics may still require the use of lead in electrode
coatings. To clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels
for RoHS compatible capacitors.
Due to customer requirements, there may appear additional markings such as lead free (LF) or lead-free wires (LFW) on the
label.