Datasheet

4© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard A4074_ESL • 4/24/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Single-Ended Aluminum Electrolytic Capacitors – ESL, +105°C
Performance Characteristics
Item Performance Characteristics
Capacitance Range 0.47 – 6,800 µF
Capacitance Tolerance ±20% at 120 Hz/20°C
Rated Voltage
16 – 100 VDC 160 – 450 VDC
Life Test 8,000 – 10,000 hours (see conditions in Test Methods & Performance)
Operating Temperature −40°C to +105°C
Leakage Current
I ≤ 0.01 CV or 3 µA, whichever is greater I ≤ 0.02 CV +10 µA
C = rated capacitance (µF), V = rated voltage (VDC). Voltage applied for 2 minutes at 20°C.
Impedance Z Characteristics at 120 Hz
Rated Voltage (VDC) 16 25 35 50 63 100 160 200 250 350 400 450
Z (−40°C)/Z (20°C) 8 6 6 6 4 4 6 6 6 7 7 9
Compensation Factor of Ripple Current (RC) vs. Frequency
Rated Voltage (VDC) 50 Hz 120 Hz 1 kHz 10 kHz 100 kHz
Coecient 0.40 0.50 0.80 0.90 1.00
Test Method & Performance
Conditions Load Life Test Shelf Life Test
Temperature
105°C 105°C
Test Duration
16 – 100 VDC
Can Ø = 5 – 6 mm 8,000 hours
1,000 hours
Can Ø ≥ 8 mm 10,000 hours
160 – 450 VDC 10,000 hours
Ripple Current Maximum ripple current specied at 100 kHz 105°C
No ripple current
applied
Voltage
The sum of DC voltage and the peak AC voltage must not exceed the rated
voltage of the capacitor
No voltage applied
Performance The following specications will be satised when the capacitor is restored to 20°C:
Capacitance Change Within ±20% of the initial value
Dissipation Factor Does not exceed 200% of the specied value
Leakage Current Does not exceed specied value