Datasheet

10© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3086_F161 • 3/18/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Surface Mount Capacitors – General Purpose and High Stability
F161 Encapsulated Stacked, Size 2220 – 6560, 50 – 400 VDC
Flux & Cleaning
KEMETrecommendsusingano-cleanuxwithahalogencontentlowerthan0.1%.
To clean the PCB assembly KEMET recommends to use a suitable solvent like Isopropyl alcohol, deionized water, or neutral
pH detergents. Aggressive solvents shall not be used. For any different cleaning solvent used please contact KEMET
Technical Services to analyze the potential impact on KEMET products.
Storage and Moisture Recommendations
KEMET SMD Film Capacitors are supplied in a MBB (Moisture Barrier Bag) Class 1. We can guarantee a 24 month shelf life
(temperature≤40°C/relativehumidity≤90%).AftertheMBBhasbeenopened,componentsmaystayinareaswithcontrolled
temperatureandhumidity(temperature≤30°C/relativehumidity≤60%)for168hours[MSL3].Forlongerperiodsoftime
and/or higher temperature and/or higher relative humidity values, it is absolutely necessary to protect the components
against humidity. If the reel inside the MBB is partially used, KEMET recommends to re-use the same MBB or to avoid areas
without controlled temperature and humidity (see above). If the above conditions are not respected, components require a
baking(minimumtime:48hoursat55±5°C)beforethereow.
Packaging Quantities
Chip Size (EIA) Size Code
Base
(mm)
Height
(mm)
Length
(mm)
Bulk
Reel
Horizontal
Orientation
Reel
Vertical
Orientation
2220
PP
5.0
3.0
5.7
2,000
2,400
2220
PU
5.0
4.0
5.7
2,000
2,100
2824
SL
6.0
3.0
7.3
2,000
2,500
2824
SP
6.0
3.5
7.3
2,000
2,300
2824
ST
6.0
4.5
7.3
1,000
1,700
4036
WP
9.1
5.5
10.2
1,000
800
500
5045
YR
11.5
6.5
12.7
1,000
600
400
6560
ZS
15.0
7.0
16.5
800
500
200