Datasheet

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3092_F862_X2_310 • 11/15/2018 5
Film Capacitors – AC Line EMI Suppression and RC Networks
F862 Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade)
Impedance Graph
0.1 µF p. 15
0.33 µF p.22.5
1 µF p. 27.5
0.001
0.01
0.1
1
10
100
0.1 1 10 100
Z [Ω]
F [MHz]
Environmental Test Data
Test Publication Procedure
Endurance IEC 60384–14
1.25 x V
R
VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1
second, 1,000 hours at upper rated temperature
Vibration IEC 60068–2–6 Test Fc 3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s
2
Bump IEC60068–2–29TestEb 1,000bumpsat390m/s
2
Temperature Cycling JESD22–MethodJA–104
1,000cycles(−55°Cto85°C)Note:If100°Cor125°Cpartthe1,000
cycleswillbeatthattemperaturerating.Measurementat24±4
hours after test conclusion. 30 minute maximum dwell time at each
temperature extreme. 1 minute maximum transition time.
ActiveFlammability IEC 60384–14 V
R
+20surgepulsesat2.5kV(pulseevery5seconds)
PassiveFlammability IEC 60384–14 IEC60384–1,IEC60695–11–5Needle-ametest
Biased Humidity
MIL–STD–202
Method 103
1,000hours40°C/93%RH.Ratedvoltage.Measurementat24±2hours
after test conclusion.
THB Test
85°C,85%RHand240VAC,1,000hours
Capacitancechange(∆C/C):≤10%
Dissipationfactorchange(∆tanδ):≤5*10
−3
(at 1 kHz)
InsulationresistanceRinsortimeconstantτ=CR
Rins:≥50%ofinitiallimit