Datasheet

4© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3110_F863_X2_310 • 4/2/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – AC Line EMI Suppression and RC Networks
F863 Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade)
Qualication
AutomotiveGradeproductsmeetorexceedtherequirementsoutlinedbytheAutomotiveElectronicsCouncil.Details
regardingtestmethodsandconditionsarereferencedindocumentAEC–Q200,StressTestQualicationforPassive
Components. For additional information regarding the Automotive Electronics Council and AEC–Q200, please visit their
websiteatwww.aecouncil.com.
Performance Characteristics
Rated Voltage 310 VAC 50/60 Hz
Capacitance Range 0.1 – 10.0 µF
Capacitance Tolerance ±20%, ±10%
Temperature Range −40°Cto+110°C
Climatic Category 40/110/56
Storage Conditions
Storagetime:≤24monthsfromthedatemarkedonthelabel
package
Averagerelativehumidityperyear≤70%
RH≤85%for30daysrandomlydistributedthroughouttheyear
Dewisabsent
Temperature:−40to80°C(see"MaximumHumidityinStorage
Conditions"graphbelow)
Approvals ENEC, UL, cUL, CQC
Dissipation Factor
MaximumValuesat+23°C
C≤0.1µF C > 0.1 µF
1 kHz 0.3% 0.2%
Test Voltage Between Terminals
The 100% screening factory test is carried out at 1,900 VDC. The
voltagelevelisselectedtomeettherequirementsinapplicable
equipment standards. All electrical characteristics are checked
after the test. It is not permitted to repeat this test as there is
ariskofdamagetothecapacitor.KEMETisnotliableinsuch
case for any failures.
Insulation Resistance
Minimum Values Between Terminals
C≤0.33µF ≥30,000MΩ
C > 0.33 µF ≥10,000MΩ•µF
In DC Applications Recommendedvoltage≤630VDC