Datasheet

7© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3077_JSN • 1/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Surface Mount Polyester (PET) Film Capacitor
JSN, Unencapsulated Stacked Chip with Flat Terminations, 63 – 250 VDC, for DC Link (Automotive Grade)
Storage and Moisture Recommendations
KEMET SMD lm capacitors are supplied in a mpoisture barrier bag (MBB) Class 1. We can guarantee a 24 month shelf life
(temperature ≤ 40°C/relative humidity ≤ 90%). After the MBB has been opened, components may stay in areas with controlled
temperature and humidity (temperature ≤ 30°C/relative humidity ≤ 60%) for 72 hours (MSL 4). For longer periods of time and/
or higher temperature and/or higher relative humidity values, it is absolutely necessary to protect the components against
humidity. If the reel inside the MBB is partially used, KEMET recommends to re-use the same MBB or to avoid areas without
controlled temperature and humidity (see above). If the above conditions are not respected, components require baking
(minimum time: 24 hours at 70 ±5°C) before the reow.
Packaging Quantities
Chip Size (EIA) Height (mm) Tray Reel
6080
All
308
120
60115
All
252
-
Carrier Taping & Packaging (IEC 60286–2)
A
0
±0.1
4 ±0.1
1.75 ±0.1
B
0
±0.1
0.5 ±0.05
W
2
K
0
±0.1
1.75 ±0.1
1.5 +0.1/0
2 ±0.15
W ±0.3
P ±0.1
W
1
D
Chip Size (EIA)
Horizontal
Mounting
Taping Specication
W P A
0
B
0
K
0
D W
1
W
2
±0.3
±0.1
Nominal
Nominal
Nominal
±2.0
−0/+2
Maximum
6080
44
24
18
22
17
330
44.5
49.5