Datasheet

5© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3077_JSN • 1/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Surface Mount Polyester (PET) Film Capacitor
JSN, Unencapsulated Stacked Chip with Flat Terminations, 63 – 250 VDC, for DC Link (Automotive Grade)
Environmental Test Data
Damp Heat, Steady State
Test Conditions
Temperature +40°C ±2°C
Relative Humidity (RH) 93% ±2%
Test Duration 56 days
Performance
Capacitance Change |∆ C/C| ≤ 7%
DF Change (∆tgδ) ≤ 50 x 10
−4
at 1 kHz
Insulation Resistance ≥ 50% of limit value
Endurance
Test Conditions
Temperature 125°C ±2°C
Test Duration 2,000 hours
Voltage Applied 1.25 x V
C
Performance
Capacitance Change |∆ C/C| ≤ 5%
DF Change (∆tgδ) ≤ 50 x 10
−4
at 1 kHz
Insulation Resistance ≥ 50% of limit value
Rapid Change of Temperature
Test Conditions
Temperature
1 hour at −55°C, 1 hour at
+125°C
Number of Cycles 1,000
Performance
Capacitance Change |∆ C/C| ≤ 5%
DF Change (∆tgδ) ≤ 50 x 10
−4
at 1 kHz
Insulation Resistance ≥ limit value
No Mechanical Damage
Reow
Test Conditions
See Solder Process
Performance
Capacitance Change |∆ C/C| ≤ 3%
DF Change (∆tgδ) ≤ 50 x 10
−4
at 1 kHz
Insulation Resistance ≥ limit value
No Mechanical Damage
Bending
Test Conditions
Deection 1 – 6 mm
Performance
Capacitance Change |∆ C/C| ≤ 1%
No visible damage on the terminations
(peeling) neither on the body (cracking)
Environmental Compliance
All KEMET surface mount capacitors are RoHS compliant.