Datasheet

11© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L9014_L-DMI • 4/17/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Chip Inductors
High Current Multilayer Chip Power Inductor L-DMI
Recommended Reow Soldering Prole
Time
Temperature
100°C
200°C
300°C
0°C
Preheating 150°C
60 seconds minimum
Heating above 230°C
40 seconds maximum
Peak 260°C maximum
10 seconds maximum
Handling Precautions
Inductorsshouldbestoredinnormalworkingenvironments.Whiletheinductorsthemselvesarequiterobustinother
environments,exposuretohightemperatures,highhumidity,corrosiveatmospheres,andlong-termstoragedegrades
solderability.
KEMETrecommendsthatmaximumstoragetemperaturenotexceed40°Candmaximumstoragehumiditynotexceed70%
relativehumidity.Atmospheresshouldbefreeofchlorine-bearingandsulfur-bearingcompounds.Temperatureuctuations
should be minimized to avoid condensation on the parts.
Foroptimizedsolderability,inductorstockshouldbeusedpromptly,preferablywithinsixmonthsofreceipt.