Datasheet

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3082_LDB • 7/31/2017 5
Surface Mount Metallized PPS Film Capacitors
LDB, Unencapsulated Stacked Chip, Size 1206 – 1812, 16 and 50 VDC
Environmental Test Data
Damp Heat, Steady State
Test Conditions
Temperature +40°C ±2°C
Relative Humidity (RH) 93% ±2%
Test Duration 56 days
Performance
Capacitance Change |∆ C/C| ≤ 5%
DF Change (∆tgδ) ≤ 30 x 10
−4
at 1 kHz
Insulation Resistance ≥ 50% of limit value
Endurance
Test Conditions
Temperature 125°C ±2°C
Test Duration 2,000 hours
Voltage Applied 1.25 x V
C
Performance
Capacitance Change |∆ C/C| ≤ 3%
DF Change (∆tgδ) ≤ 30 x 10
−4
at 1 kHz
Insulation Resistance ≥ 50% of limit value
Rapid Change of Temperature
Test Conditions
Temperature
1 hour at −55°C, 1 hour at
+125°C
Number of Cycles 1,000
Performance
Capacitance Change |∆ C/C| ≤ 3%
DF Change (∆tgδ) ≤ 50 x 10
−4
at 1 kHz
Insulation Resistance ≥ limit value
No Mechanical Damage
Reow
Test Conditions
See Solder Process
Performance
Capacitance Change |∆ C/C| ≤ 3%
DF Change (∆tgδ) ≤ 50 x 10
−4
at 1 kHz
Insulation Resistance ≥ limit value
No Mechanical Damage
Bending
Test Conditions
Deection 1 to 6 mm
Performance
Capacitance Change |∆ C/C| ≤ 1%
No visible damage on the terminations
(pealing) neither on the body (cracking)
Environmental Compliance
All KEMET surface mount capacitors are RoHS Compliant.