Datasheet

3© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3078_LDE • 2/19/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Surface Mount Polyethylene Naphthalate (PEN) Film Capacitor
LDE, Unencapsulated Stacked Chip, Size 1206 – 6054, 50 – 1,000 VDC (Automotive Grade)
Performance Characteristics
Rated Voltage (VDC) 50 63 100 250 400 630 1,000
Rated Voltage (VAC) 40 40 63 120 160 200 250
CapacitanceRange(μF) 0.001 – 4.7 0.001 – 4.7 0.001 – 4.7 0.001 – 1.5 0.015 – 0.47 0.001 – 0.27 0.001 – 0.1
Chip Size (EIA) 1206 – 6054
Capacitance Values E12 series
Capacitance Tolerance ±10%, ±20%, ±5% on request
Category Temperature
Range
−55°Cto+125°C
Rated Temperature +105°C
Voltage Derating V
C
(category voltage) = V
R
(ratedvoltage)upto105°C.V
C
isdecreasedwith1.25%/°Cfrom+105°Cto+125°C
Climatic Category 55/125/56
Capacitance Drift
Maximum3%(sizes≤22.20)aftera2yearstorageperiodatatemperatureof+10°Cto+40°Candarelative
humidity of 40% to 60%
Maximum2%(sizes>22.20)aftera2yearstorageperiodatatemperatureof+10°Cto+40°Candarelative
humidity of 40% to 60%
Reliability
(Reference MIL-HDBK-217)
Failurerate≤1FIT,T=+40°C,V=0.5xV
R
1 FIT = 10
−9
failures / (components * hours)
Failure criteria: open or short circuit, cap. change > 10%, DF 2 times the catalog limits, IR < 0.005 x initial limit
Insulation Resistance
Measuredat+25°C±5°C
Minimum Value Between Terminals
C≤0.33µF 1,000MΩ
C > 0.33 µF 400MΩ•µF
Charging time: 1 minute
Charging voltage:
10 VDC for V
R
< 100 VDC
100 VDC for V
R
≥100VDC
Dissipation Factor
MaximumValuesat25°C±5°C
1 kHz 0.8%
Surge Voltage Test
1.4 x V
R
(2seconds;T=25±5°C)forV
R
≤630V
DC
1.5 x V
R
(2seconds;T=25±5°C)forV
R
= 1,000 V
DC
Maximum dv/dt
100 V/us for V
R
≤630VDC
300 V/us for V
R
= 1,000 VDC
Qualication
Automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details
regardingtestmethodsandconditionsthatarereferencedinthedocumentAEC–Q200,StressTestQualicationforPassive
Components. For additional information regarding the Automotive Electronics Council and AEC–Q200, please visit their
website at www.aecouncil.com.