Datasheet

7© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3078_LDE • 2/19/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Surface Mount Polyethylene Naphthalate (PEN) Film Capacitor
LDE, Unencapsulated Stacked Chip, Size 1206 – 6054, 50 – 1,000 VDC (Automotive Grade)
Environmental Test Data
Damp Heat, Steady State
Test Conditions
Temperature +40°C±2°C
Relative Humidity (RH) 93% ±2%
Test Duration 56 days
Performance
CapacitanceChange|∆C/C| ≤7%
DFChange(∆tgδ) ≤50x10
−4
at 1 kHz
Insulation Resistance ≥50%oflimitvalue
Endurance
Test Conditions
Temperature 125°C±2°C
Test Duration 2,000 hours
Voltage Applied 1.25 x V
C
Performance
CapacitanceChange|∆C/C| ≤5%
DFChange(∆tgδ) ≤50x10
−4
at 1 kHz
Insulation Resistance ≥50%oflimitvalue
Rapid Change of Temperature
Test Conditions
Temperature
1hourat−55°C,
1hourat+125°C
Number of Cycles 1,000
Performance
CapacitanceChange|∆C/C| ≤5%
DFChange(∆tgδ) ≤50x10
−4
at 1 kHz
Insulation Resistance ≥limitvalue
No Mechanical Damage
Reow
Test Conditions
See Solder Process
Performance
CapacitanceChange|∆C/C| ≤3%
DFChange(∆tgδ) ≤50x10
−4
at 1 kHz
Insulation Resistance ≥limitvalue
No Mechanical Damage
Bending
Test Conditions
Deection 1 – 6 mm
Performance
CapacitanceChange|∆C/C| ≤1%
No visible damage on the terminations
(peeling) neither on the body (cracking)
Environmental Compliance
All KEMET surface mount capacitors are RoHS Compliant.