Datasheet

ManualsBrandsKEMET ManualsCapacitorsY Capacitor, 560pF, 500VAC, 20%

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3088_P295_Y1_500 • 2/20/2019

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

One world. One KEMET

Benets

• Approvals: ENEC, UL, cUL, CQC

• Rated voltage: 500 VAC 50/60 Hz

• Capacitance range: 470 – 4,700 pF

• Lead spacing: 15.0 mm

• Capacitance tolerance: ±20%

• Climatic category: 40/115/56/B, IEC 60068–1

• Tape and reel packaging in accordance with IEC 60286–2

• RoHS Compliant and lead-free terminations

• Operatingtemperaturerangeof−40°Cto+115°C

• 100% screening factory test at 4,000 VAC, 50 Hz,

2 seconds

• Highest possible safety regarding active and

passiveammability

• Excellent self-healing properties ensure long life

even when subjected to frequent over voltages

• Good resistance to ionization due to impregnated dielectric

• High dV/dt capability

• Impregnated paper provides excellent stability and reliability

properties, particularly in applications with continuous operation

• Automotive Grade (AEC-Q200)

Overview

Multilayer metallized paper, encapsulated and impregnated

in self-extinguishing material that meets the requirements

of UL 94 V–0.

Automotive grade devices meet the demanding Automotive

ElectronicsCouncil'sAEC–Q200qualicationrequirements.

Applications

Safety capacitors for bridging of double or reinforced

insulation applications that require a voltage test up to

4,000 VAC at 60 seconds. P295 series capacitors can be

left in place during this test.

AC Line EMI Suppression and RC Networks

P295 Series Metallized Impregnated Paper,

Class Y1, 500 VAC

Part Number System

P 295 B E 471 M 500 A

Capacitor

Class

Series

Lead Spacing

(mm)

Size Code

Capacitance

Code (pF)

Capacitance

Tolerance

Rated Voltage

(VAC)

Packaging

P = Paper Y1, Metallized

Paper

B = 15.0 See Dimension

Table

First two digits

represent

signicant

gures.Third

digitspecies

number of

zeros.

M = ±20% 500 = 500 See Ordering

Options Table

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (12 pages)

PAGE 1
AC Line EMI Suppression and RC Networks P295 Series Metallized Impregnated Paper, Class Y1, 500 VAC Overview Applications Multilayer metallized paper, encapsulated and impregnated in self-extinguishing material that meets the requirements of UL 94 V–0. Safety capacitors for bridging of double or reinforced insulation applications that require a voltage test up to 4,000 VAC at 60 seconds. P295 series capacitors can be left in place during this test.
PAGE 2
Film Capacitors – AC Line EMI Suppression and RC Networks P295 Series Metallized Impregnated Paper, Class Y1, 500 VAC Ordering Options Table Lead Spacing Nominal (mm) Type of Leads and Packaging Lead Length (mm) KEMET Part Number (Insert at 14th character) 6 +0/−1 30 +5/−0 C A H0= 18.5 +/−0.5 L Standard Lead and Packaging Options Bulk – Short Leads Bulk – Maximum Length Leads 15 Tape and Reel (Standard Reel Φ = 360 mm) Dimensions – Millimeters FRONT VIEW SIDE VIEW L B H 0.5 d LL Ø 0.
PAGE 3
Film Capacitors – AC Line EMI Suppression and RC Networks P295 Series Metallized Impregnated Paper, Class Y1, 500 VAC Performance Characteristics Rated Voltage Capacitance Range Capacitance Tolerance Temperature Range Climatic Category Approvals 500 VAC 50/60 Hz 0.00047 – 0.0047 µF ±20% −40°C to +115°C 40/115/56/B ENEC, UL, cUL, CQC Maximum Values at +23°C Dissipation Factor Test Voltage Between Terminals 1 kHz 1.3% The 100% screening factory test is carried out at 4,000 VAC, 50 Hz, 2 seconds.
PAGE 4
Film Capacitors – AC Line EMI Suppression and RC Networks P295 Series Metallized Impregnated Paper, Class Y1, 500 VAC Environmental Test Data Test IEC Publication Procedure Endurance IEC 60384–14 Vibration IEC 60068–2–6 Test Fc Bump IEC 60068–2–29 Test Eb 4,000 bumps at 390 m/second2 Change of Temperature IEC 60068–2–14 Test Na Upper and lower rated temperature 5 cycles Passive Flammability IEC 60384–14 Damp Heat Steady State IEC 60068–2–78 Test Cab 1.
PAGE 5
Film Capacitors – AC Line EMI Suppression and RC Networks P295 Series Metallized Impregnated Paper, Class Y1, 500 VAC Table 1 – Ratings & Part Number Reference Capacitance Value (µF) Maximum Dimensions in mm B H L Lead Spacing (p) fo (MHz) dV/dt (V/µs) KEMET Part Number 0.00047 0.00056 0.00068 0.00082 0.001 0.0012 0.0015 0.0018 0.0022 0.0025 0.0027 0.0033 0.0039 0.0047 5.5 5.5 5.5 5.5 5.5 6.5 6.5 6.5 6.5 7.5 7.5 7.5 8.5 8.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 14.5 14.5 14.5 16.0 16.
PAGE 6
Film Capacitors – AC Line EMI Suppression and RC Networks P295 Series Metallized Impregnated Paper, Class Y1, 500 VAC Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAuCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from 183ºC for SnPb eutectic alloys to 217 – 221ºC for the new alloys.
PAGE 7
Film Capacitors – AC Line EMI Suppression and RC Networks P295 Series Metallized Impregnated Paper, Class Y1, 500 VAC Soldering Process cont'd Wave Soldering Recommendations cont'd 1. The table indicates the maximum set-up temperature of the soldering process.
PAGE 8
Film Capacitors – AC Line EMI Suppression and RC Networks P295 Series Metallized Impregnated Paper, Class Y1, 500 VAC Construction Molded Plastic Case Metallized Impregnated Paper (First Layer) Detailed Cross Section Molded Plastic Self-Extinguishing Case Resin Metallized Impregnated Paper (Second Layer) Margin Margin Metal Contact Layer Metal Contact Layer Margin Leads Winding Scheme Metal Spraying Material Impregnated Paper Metallization Series Design — Multilayer Impregnated Paper Dielectric 2
PAGE 9
Film Capacitors – AC Line EMI Suppression and RC Networks P295 Series Metallized Impregnated Paper, Class Y1, 500 VAC Marking FRONT TOP KEMET Logo Approval Marks Series Rated Voltage, Safety Class Capacitance IEC Climatic Category Capacitance Tolerance Manufacturing Date Code Packaging Quantities Lead Spacing (mm) 15 Thickness Height (mm) (mm) Lead and Packaging Code 5.5 12.5 7.5 14.5 6.5 12.5 8.
PAGE 10
Film Capacitors – AC Line EMI Suppression and RC Networks P295 Series Metallized Impregnated Paper, Class Y1, 500 VAC Lead Taping & Packaging (IEC 60286–2) Lead Spacing 5 mm Lead Spacing 7.5 mm 0 0 Lead Spacing 22.5 – 27.5 mm Lead Spacing 10 – 15mm 0 0 Formed Leads from 10 and 15 mm to 7.5 mm 0 Taping Specification Standard IEC 60286-2 Dimensions in mm Lead Spacing +6/−0.1 F 5 7.5 Formed 7.5 10 15 22.5 27.5 F ±0.5 W 18 18 18 18 18 18 18 18 +1/−0.
PAGE 11
Film Capacitors – AC Line EMI Suppression and RC Networks P295 Series Metallized Impregnated Paper, Class Y1, 500 VAC Lead Taping & Packaging (IEC 60286–2) cont'd Ammo Specifications Dimensions (mm) Series P295 H W T 330 330 50 H Reel Specifications T W Dimensions (mm) Series P295 D H W 360 500 30 46 (Max) D H Manufacturing Date Code (IEC–60062) W Y = Year, Z = Month Year 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 Code M
PAGE 12
Film Capacitors – AC Line EMI Suppression and RC Networks P295 Series Metallized Impregnated Paper, Class Y1, 500 VAC KEMET Electronics Corporation Sales Oﬃces For a complete list of our global sales oﬃces, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.