Datasheet

ManualsBrandsKEMET ManualsAluminium Electrolytic CapacitorsAxial Electrolytic Capacitor, 6300uF, 25V, -10 ... 30 %

1© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4045_PEG130 • 7/19/2014

One world. One KEMET

Benets

• Next-generation high performance axial series

• Very long operational life (up to 160,000 hours at 80°C)

• Minimal heat generation

• New low ESR electrolyte/paper system

• Available with capacitances as high as 6,300 µF and voltage

options of 25, 40, and 63 VDC

• Polarised all-welded design

• Outstanding electrical performance

Overview

KEMET's PEG130 Series is an electrolytic capacitor with

outstanding electrical performance. This product is constructed in

a polarized, all-welded design with tinned copper wire leads and

the negative pole connected to the case of the capacitor. The

PEG130 winding is housed in a cylindrical aluminum can with a

high purity aluminium lid and a high quality rubber gasket. The

low ESR is a result of a low resistive electrolyte/paper system

and an all-welded design.

Applications

KEMET's PEG130 is a new generation of high performance axial

electrolytic capacitors, designed for applications with very long

service life requirements. The capacitors are especially suitable

for LED/lamp power supplies, automotive and low voltage power

electronic applications.

Axial Aluminum Electrolytic Capacitors

PEG130 Series, 105ºC

Part Number System

PEG130 H H 436 0 Q L1

Series Voltage (VDC) Size Code Capacitance Code (µF) Version

Capacitance

Tolerance

Packaging

Axial Aluminum

Electrolytic

H = 25

K = 40

M = 63

See Dimension

Table

The second two digits indicate

the two most signicant digits of

the capacitance value. The rst

digit indicates the total number

digits.

0 = Standard

Q = -10 +30%

See Ordering

Options Table

Summary of content (9 pages)

PAGE 1
Axial Aluminum Electrolytic Capacitors PEG130 Series, 105ºC Overview Applications KEMET's PEG130 Series is an electrolytic capacitor with outstanding electrical performance. This product is constructed in a polarized, all-welded design with tinned copper wire leads and the negative pole connected to the case of the capacitor. The PEG130 winding is housed in a cylindrical aluminum can with a high purity aluminium lid and a high quality rubber gasket.
PAGE 2
Axial Aluminum Electrolytic Capacitors – PEG130 Series, 105ºC Performance Characteristics Item Performance Characteristics Capacitance Range 900 – 6,300 µF Rated Voltage 25 – 63 VDC Operating Temperature -40 to +105°C Capacitance Tolerance -10/+30% at 100 Hz / +20°C Operational Lifetime 37,000 hours at +105°C (hours, D = 20 mm) Shelf Life 5,000 hours at +105°C or 10 years at +40°C 0 VDC I = 0.003 CV + 4.
PAGE 3
Axial Aluminum Electrolytic Capacitors – PEG130 Series, 105ºC Ordering Options Table Packaging Kind Lead and Packaging Code Lead Length (mm) Standard Packaging Options Bulk (box) 40 +3/-2 L1 Dimensions – Millimeters LL LL "+" polarity indicator d Length to Lead Bend Size Code D ±0.5 Dimensions in mm L L1 d Bulk LL +/-2 Approximate Weight Grams ±1 Minimum ±0.03 H 20 29.0 35.0 1.0 40 13 J 20 37.0 43.0 1.0 40 20 L 20 46.0 52.0 1.
PAGE 4
Axial Aluminum Electrolytic Capacitors – PEG130 Series, 105ºC Shelf Life The capacitance, ESR and impedance of a capacitor will not change significantly after extended storage periods, however the leakage current will very slowly increase. KEMET products are particularly stable and allow a shelf life in excess of ten years at 40°C. See sectional specification under each product series for specific data. Failure Rate Estimated field failure rate: ≤ 0.
PAGE 5
Axial Aluminum Electrolytic Capacitors – PEG130 Series, 105ºC Table 1 – Ratings & Part Number Reference VDC 25 25 25 40 40 40 63 63 63 VDC Rated Capacitance 100 Hz 20°C (µF) 3600 4800 6300 2000 3000 3900 900 1400 1800 Rated Capacitance Size Code H J L H J L H J L Size Code Case Size Ripple Current Maximum 100 Hz ≥ 5 kHz D x L (mm) 105°C (A) 60°C (A) 20 x 29 1.72 8.9 20 x 37 2.11 10.8 20 x 46 2.45 12.1 20 x 29 1.44 8.8 20 x 37 1.85 10.7 20 x 46 2.18 12.3 20 x 29 1.06 7.2 20 x 37 1.40 9.0 20 x 46 1.
PAGE 6
Axial Aluminum Electrolytic Capacitors – PEG130 Series, 105ºC Packaging Quantities Size Code Packaging Quantities H J L Bulk 150 125 100 Print Detail Standard Marking for PEG and PEH types • KEMET logo • Rated capacitance • Capacitance tolerance • Rated voltage • Date code • Polarity indication • Article code © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.
PAGE 7
Axial Aluminum Electrolytic Capacitors – PEG130 Series, 105ºC Construction The manufacturing process begins with the anode foil being electrochemically etched to increase the surface area and then “formed” to produce the aluminum oxide layer. Both the anode and cathode foils are then interleaved with absorbent paper and wound into a cylinder. During the winding process, aluminum tabs are attached to each foil to provide the electrical contact.
PAGE 8
Axial Aluminum Electrolytic Capacitors – PEG130 Series, 105ºC KEMET Corporation World Headquarters Europe Asia Southern Europe Paris, France Tel: 33-1-4646-1006 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Sasso Marconi, Italy Tel: 39-051-939111 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.
PAGE 9
Axial Aluminum Electrolytic Capacitors – PEG130 Series, 105ºC Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.