Datasheet

ManualsBrandsKEMET ManualsAluminium Electrolytic CapacitorsElectrolytic Capacitor 6800uF, 10.1A, 63V, ±20 %

1© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com A4035_PEH169_85ºC • 2/7/2017

One world. One KEMET

Benets

• High CV value

• Long life, up to 38,000 hours at +85°C (V

, I

applied)

• Low ESR and ESL

• High stability, 10 years shelf life

• Optimized designs available on request

Overview

KEMET's PEH169 Series is a long-life electrolytic capacitor

with outstanding reliability and electrical performance. The

device has a polarized all-welded design, heavy duty screw

terminals, extended cathode construction, safety vent, and

plastic insulation. The PEH169 Series winding is housed

in a cylindrical aluminum can with a reinforced molded lid

incorporating a safety vent. The sealing system is designed

for electrolyte leakage-free operation and a very low gas-

diffusion rate of electrolyte. Mechanical contact between

the winding and case allows excellent heat transfer from

the winding to the ambient, which means cooler operation.

Low ESR is the result of a low resistive paper/electrolyte

system, at least two tabs per foil and an all-welded design.

Applications

Typical applications for KEMET's PEH169 capacitor

include smoothing, energy storage or pulse operation in

telecommunication demanding power supplies, process

control, AC motor control, traction, welding, and measuring.

Screw Terminal Aluminum Electrolytic Capacitors

PEH169 Series, +85°C

Part Number System

PEH169 E A 510 V M U2

Series Rated Voltage (VDC) Size Code

Capacitance Code

(µF)

Version

Capacitance

Tolerance

Stud Option

Screw Terminal

Aluminum

Electrolytic

E = 10

G = 16

H = 25

K = 40

M = 63

P = 100

Q = 160

R = 200

S = 250

U = 350

V = 400

O = 420

Y = 450

See Dimension

Table

The last two

digits represent

signicant

gures. The

rst digit

species the

total number of

digits.

0 = Standard Q = −10 +30%

M = ±20%

U2 = Plain Can

B2 = Threaded

mounting stud

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (13 pages)

PAGE 1
Screw Terminal Aluminum Electrolytic Capacitors PEH169 Series, +85°C Overview Applications KEMET's PEH169 Series is a long-life electrolytic capacitor with outstanding reliability and electrical performance. The device has a polarized all-welded design, heavy duty screw terminals, extended cathode construction, safety vent, and plastic insulation. The PEH169 Series winding is housed in a cylindrical aluminum can with a reinforced molded lid incorporating a safety vent.
PAGE 2
Screw Terminal Aluminum Electrolytic Capacitors – PEH169 Series, +85°C Performance Characteristics Item Performance Characteristics Capacitance Range 68 – 470,000 µF Rated Voltage 10 – 450 VDC Operating Temperature −40 to +85°C Capacitance Tolerance ±20%, (−10/+30% select values) at 100 Hz/+20°C Operational Lifetime Shelf Life Leakage Current D (mm) Rated Voltage and Ripple Current at +85°C (hours) 35 14,000 50 17,000 65 21,000 75 28,000 90 38,000 I = 0.
PAGE 3
Screw Terminal Aluminum Electrolytic Capacitors – PEH169 Series, +85°C Test Method & Performance Endurance Life Test Conditions Performance Temperature +85°C Test Duration 5,000 hours Ripple Current Voltage Performance Capacitance Change Equivalent Series Resistance Leakage Current Maximum ripple current specified in table The sum of DC voltage and the peak AC voltage must not exceed the rated voltage of the capacitor The following specifications will be satisfied when the capacitor is tested at +
PAGE 4
Screw Terminal Aluminum Electrolytic Capacitors – PEH169 Series, +85°C Dimensions – Millimeters SIDE VIEW L3 L2 L1 OVAL TERMINAL END VIEW ROUND TERMINAL END VIEW (D > 36.6) (D = 36.6) Safety Vent a D DT + Reference Size (mm) Size Code 35 x 51 35 x 60 35 x 75 35 x 95 50 x 75 50 x 95 50 x 105 50 x 115 65 x 105 65 x 115 65 x 130 75 x 78 75 x 98 75 x 105 75 x 115 75 x 145 75 x 220 90 x 145 A B C D H J K I* O Q* S* L P* T U V X Y L1 ±1.0 ±1.0 ±1.
PAGE 5
Screw Terminal Aluminum Electrolytic Capacitors – PEH169 Series, +85°C Shelf Life The capacitance, ESR and impedance of a capacitor will not change significantly after extended storage periods, however the leakage current will very slowly increase. KEMET products are particularly stable and allow a shelf life in excess of three years at 40°C. See sectional specification under each product series for specific data.
PAGE 6
Screw Terminal Aluminum Electrolytic Capacitors – PEH169 Series, +85°C MTBF The mean time between failures (MTBF) is simply the inverse of the failure rate. MTBF= 1/λ Failure Rate early failures wear out operational life Time The failure rate is derived from our periodic test results. The failure rate (λR) is, therefore, only given at test temperature for life tests. An estimation is also given at 60°C.
PAGE 7
Screw Terminal Aluminum Electrolytic Capacitors – PEH169 Series, +85°C Table 1 – Ratings & Part Number Reference VDC 10 10 10 10 10 10 10 10 10 10 10 16 16 16 16 16 16 16 16 16 16 25 25 25 25 25 25 25 25 25 25 25 40 40 40 40 40 40 40 40 40 40 63 63 63 63 63 63 63 63 63 63 63 63 100 100 100 100 VDC Rated Capacitance 100 Hz 20°C (µF) 10000 15000 22000 33000 47000 68000 100000 150000 220000 330000 470000 10000 15000 22000 33000 47000 68000 100000 150000 220000 330000 6000 6800 10000 15000 22000 33000 47000
PAGE 8
Screw Terminal Aluminum Electrolytic Capacitors – PEH169 Series, +85°C Table 1 – Ratings & Part Number Reference cont'd VDC 100 100 100 100 100 100 100 160 160 160 160 160 160 160 160 160 160 200 200 200 200 200 200 200 200 200 250 250 250 250 250 250 250 250 250 250 250 250 250 250 350 350 350 350 350 350 350 350 350 350 350 350 400 400 400 400 400 400 VDC Rated Capacitance 100 Hz 20°C (µF) 4700 6800 10000 15000 22000 33000 33000 470 680 1000 1500 2200 3300 4700 6800 10000 15000 470 680 1000 1500 2200 3
PAGE 9
Screw Terminal Aluminum Electrolytic Capacitors – PEH169 Series, +85°C Table 1 – Ratings & Part Number Reference cont'd VDC 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 420 420 420 420 420 420 420 420 420 420 420 420 450 450 450 450 450 450 450 450 450 450 450 450 VDC Rated Capacitance 100 Hz 20°C (µF) 330 330 470 470 680 1000 1000 1500 1500 2200 2200 2200 3300 3300 4700 4700 68 100 150 220 330 470 680 1000 1500 2200 3300 3300 68 100 150 220 330 470 680 1000 1500 2200 3300 3300 Rated
PAGE 10
Screw Terminal Aluminum Electrolytic Capacitors – PEH169 Series, +85°C Mechanical Data Polarity and Reversed Voltage Aluminium Electrolytic capacitors manufactured for use in DC applications contain an anode foil and a cathode foil. As such, they are polarized devices and must be connected with the +ve to the anode foil and the -ve to the cathode foil.
PAGE 11
Screw Terminal Aluminum Electrolytic Capacitors – PEH169 Series, +85°C Marking KEMET Logo Part Number Code Rated Capacitance Rated Voltage (VDC) Capacitance Tolerance Operating Temperature Date of Manufacture, Batch Number Made in The European Union Construction Screw Terminal Insulating Cup Detailed Cross Section Safety Vent Deck Aluminum Can Laser Welded Terminal Tabs Laser Welded Terminal Tab Margin Aluminum Can Insulating Cup Deck Paper Spacer Impregnated with Electrolyte (First Layer)
PAGE 12
Screw Terminal Aluminum Electrolytic Capacitors – PEH169 Series, +85°C Construction Data The manufacturing process begins with the anode foil being electrochemically etched to increase the surface area and then “formed” to produce the aluminum oxide layer. Both the anode and cathode foils are then interleaved with absorbent paper and wound into a cylinder. During the winding process, aluminum tabs are attached to each foil to provide the electrical contact.
PAGE 13
Screw Terminal Aluminum Electrolytic Capacitors – PEH169 Series, +85°C KEMET Electronic Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.