Datasheet

ManualsBrandsKEMET ManualsAluminium Electrolytic CapacitorsElectrolytic Capacitor 22000uF, 19.3A, 100V, ±20 %

1© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com A4034_PEH200 • 4/5/2018

One world. One KEMET

Benets

• High CV value

• Long life, up to 29,000 hours at +85°C (V

, I

applied)

• Low ESR and ESL

• Compact size

• Optimized designs available upon request

Overview

The KEMET PEH200 capacitors have polarized all-welded

design, heavy duty screw terminals, extended cathode

construction, safety vent, and plastic insulation. The

sealing system is designed for electrolyte leakage-

free operation and a very low gas-diffusion rate of an

electrolyte. Mechanical contact between the winding

and aluminum case allows excellent heat transfer from

the winding hot-spot to the ambient, which means cooler

operation and very high current ratings.

Applications

Typical applications for KEMET's PEH200 capacitor include

uninterruptible power supplies (UPS), ground power units

(GPU), welding equipment, and drives where high current

ratings and compact size are important.

Screw Terminal Aluminum Electrolytic Capacitors

PEH200, +85°C

Part Number System

PEH200 H A 515 0 M U2

Series Rated Voltage (VDC) Size Code

Capacitance Code

(µF)

Version

Capacitance

Tolerance

Stud Option

Screw Terminal

Aluminum

Electrolytic

H = 25

K = 40

M = 63

P = 100

S = 250

U = 350

X = 385

V = 400

O = 420

Y = 450

Z = 500

See Dimension

table

The last two

digits represent

signicant

gures. The

rst digit

species the

total number of

digits.

0 = Standard M = ±20% U2 = Plain Can

B2 = Threaded

mounting stud

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (13 pages)

PAGE 1
Screw Terminal Aluminum Electrolytic Capacitors PEH200, +85°C Overview Applications The KEMET PEH200 capacitors have polarized all-welded design, heavy duty screw terminals, extended cathode construction, safety vent, and plastic insulation. The sealing system is designed for electrolyte leakagefree operation and a very low gas-diffusion rate of an electrolyte.
PAGE 2
Screw Terminal Aluminum Electrolytic Capacitors – PEH200, +85°C Performance Characteristics Item Performance Characteristics Capacitance Range 100 – 330,000 µF Rated Voltage 25 – 500 VDC Operating Temperature −40 to +85°C Capacitance Tolerance ±20% at 100 Hz/+20°C 35 50 65 75 Rated Voltage and Ripple Current at +85°C (hours) 10,000 12,000 15,000 19,000 90 29,000 D (mm) Operational Lifetime Shelf Life Leakage Current 60,000 2,000 hours at +85°C or 4 years at +40°C 0 VDC I = 0.
PAGE 3
Screw Terminal Aluminum Electrolytic Capacitors – PEH200, +85°C Dimensions – Millimeters SIDE VIEW L3 L2 L1 OVAL TERMINAL END VIEW ROUND TERMINAL END VIEW (D > 36.6) (D = 36.
PAGE 4
Screw Terminal Aluminum Electrolytic Capacitors – PEH200, +85°C Termination Table Reference Diameter Thread Termination Style 35 50 65 75 90 M5 M5 M5 M5 M5 Round Oval Oval Oval Oval Dimensions in mm DT 8 15 15 15 15 b 13 13 13 13 Note: M6 and other termination options available on request Case Polarity Due to the presence of electrolyte in the capacitor, the aluminum can and stud mounting will essentially be at the same polarity as the negative terminal.
PAGE 5
Screw Terminal Aluminum Electrolytic Capacitors – PEH200, +85°C Reliability The reliability of a component can be defined as the probability that it will perform satisfactorily under a given set of conditions for a given length of time. In practice, it is impossible to predict with absolute certainty how any individual component will perform. Therefore, we must utilize probability theory. It is also necessary to clearly define the level of stress involved (e.g.
PAGE 6
Screw Terminal Aluminum Electrolytic Capacitors – PEH200, +85°C MTBF The mean time between failures (MTBF) is simply the inverse of the failure rate. MTBF = 1/λ Failure Rate early failures wear out operational life Time The failure rate is derived from our periodic test results. The failure rate (λR) is, therefore, only given at test temperature for life tests. An estimation is also given at 60°C.
PAGE 7
Screw Terminal Aluminum Electrolytic Capacitors – PEH200, +85°C Table 1 – Ratings & Part Number Reference VDC 25 25 25 25 25 25 25 25 25 40 40 40 40 40 40 40 40 40 40 63 63 63 63 63 63 63 63 63 100 100 100 100 100 100 100 100 100 100 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 350 350 350 VDC Rated Capacitance 100 Hz 25°C (µF) 15000 22000 33000 47000 68000 100000 150000 220000 330000 6800 10000 15000 22000 33000 47000 68000 100000 150000 220000 4700 6800 10000 15000 22000 33000 47
PAGE 8
Screw Terminal Aluminum Electrolytic Capacitors – PEH200, +85°C Table 1 – Ratings & Part Number Reference cont'd VDC 350 350 350 350 350 350 350 350 350 350 350 350 350 350 385 385 385 385 385 385 385 385 385 385 385 385 385 385 385 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 420 420 420 420 420 420 420 420 420 420 420 VDC Rated Capacitance 100 Hz 25°C (µF) 680 680 1000 1500 2200 2200 3300 3300 4700 4700 6800 10000 10000 15000 220 330 470 470 680 1000 1500 2200 2200 3300 3300
PAGE 9
Screw Terminal Aluminum Electrolytic Capacitors – PEH200, +85°C Table 1 – Ratings & Part Number Reference cont'd VDC 420 420 420 420 420 420 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 500 500 500 500 500 500 500 500 500 500 500 500 500 500 VDC Rated Capacitance 100 Hz 25°C (µF) 2700 3300 3300 4700 4700 8200 150 220 330 330 470 680 1000 1500 1500 1800 2200 2200 3300 3300 4700 4700 8200 100 150 220 220 330 470 680 1000 1500 1800 2200 3300 3300 5600 Rated Capacitance Size Code Re
PAGE 10
Screw Terminal Aluminum Electrolytic Capacitors – PEH200, +85°C Mechanical Data Polarity and Reversed Voltage Aluminium Electrolytic capacitors manufactured for use in DC applications contain an anode foil and a cathode foil. As such, they are polarized devices and must be connected with the +ve to the anode foil and the -ve to the cathode foil.
PAGE 11
Screw Terminal Aluminum Electrolytic Capacitors – PEH200, +85°C Marking KEMET Logo Part Number Code Rated Capacitance Rated Voltage (VDC) Capacitance Tolerance Operating Temperature Date of Manufacture, Batch Number Made in The European Union Construction Screw Terminal Insulating Cup Detailed Cross Section Safety Vent Deck Aluminum Can Laser Welded Terminal Tabs Laser Welded Terminal Tab Margin Aluminum Can Insulating Cup Deck Paper Spacer Impregnated with Electrolyte (First Layer) Polari
PAGE 12
Screw Terminal Aluminum Electrolytic Capacitors – PEH200, +85°C Construction Data The manufacturing process begins with the anode foil being electrochemically etched to increase the surface area and then “formed” to produce the aluminum oxide layer. Both the anode and cathode foils are then interleaved with absorbent paper and wound into a cylinder. During the winding process, aluminum tabs are attached to each foil to provide the electrical contact.
PAGE 13
Screw Terminal Aluminum Electrolytic Capacitors – PEH200, +85°C KEMET Electronics Corporation Sales Oﬃces For a complete list of our global sales oﬃces, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.