Datasheet

4© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com A4034_PEH200 • 4/5/2018

Screw Terminal Aluminum Electrolytic Capacitors – PEH200, +85°C

Termination Table

Reference

Diameter

Thread

Termination

Style

Dimensions in mm

DT b

Round

Oval

Note: M6 and other termination options available on request

Case Polarity

Due to the presence of electrolyte in the capacitor, the aluminum can and stud mounting will essentially be at the same

polarity as the negative terminal. We recommend that the stud and can be insulated (see accessories for insulating nuts).

Shelf Life

The capacitance, ESR and impedance of a capacitor will not change signicantly after extended storage periods, however,

the leakage current will very slowly increase. KEMET products are particularly stable and allow a shelf life in excess of three

years at 40°C. See sectional specication under each product for specic data.

Re-age (Reforming) Procedure

Apply the rated voltage to the capacitor at room temperature for a period of one hour, or until the leakage current has fallen

to a steady value below the specied limit. During re-aging, a maximum charging current of twice the specied leakage

current or 5 mA (whichever is greater) is suggested.