Datasheet

ManualsBrandsKEMET ManualsCapacitorsCapacitor, Radial 150 nF ±5% 630 VDC/250 VAC

RoHS

Compliant

100 250 300 400 450 630 1000 1600 2000

63 160 160 220 220 250 250 650 700

0.001 0.001 0.033 0.001 0.1 0.001 0.0027 0.0047 0.001

–0.22 –27 –18 –10 –3.9 –5.6 –3.3 –0.047 –0.027

In accordance with IEC E12 series

±5%, other tolerances on request

–55 ... +105°C

+85°C

The rated voltage is decreased with 1.3%/°C between +85°C and +105°C.

IEC 60068-1, 55/105/56/B

Category B according to IEC 60065

dU/dt according to article table

For peak to peak voltages lower than rated voltage (U

< U

), the speciﬁed dU/dt can be

multiplied by the factor U

PP.

–200 (+50, –100) ppm/°C (at 1 kHz)

Approximately 6 nH/cm for the total length of capacitor winding and the leads.

Maximum values at +23°C

C ≤ 0.1 µF 0.1µF < C ≤ 1.0 µF C > 1.0 µF

1 kHz 0.05% 0.05% 0.10%

10 kHz – 0.10%

100 kHz 0.25% – –

Measured at +23°C, 100 VDC 60 s for U

< 500 VDC and at 500 VDC for U

≥ 500 VDC

Between terminals:

C ≤ 0.33 µF: ≥ 100 000 MΩ

C > 0.33 µF: ≥ 30 000 s

Between terminals and case:

≥ 100 000 MΩ.

pHE426

• Single metallized ﬁlm pulse capacitor, polypropylene dielectric

• According to IEC 60384-16, grade 1.1

tYpiCaL appLiCations ConstRuCtion

tECHniCaL data

Pulse operation in SMPS, TV, monitor,

electrical ballast and other high frequency

applications demanding stable operation.

Polypropylene ﬁlm capacitor with vacuum

evaporated aluminum electrodes. Radial

leads of tinned wire are electrically welded

to the contact metal layer on the ends of

the capacitor winding. Encapsulation in

self-extinguishing material meeting the

requirements of UL 94V-0.

Two different winding constructions are

used, depending on voltage and lead

spacing. They are speciﬁed in the article

table.

Rated voltage U

, VDC

Rated voltage U

, VAC

Capacitance range, µF

Capacitance values

Capacitance tolerance

Category temperature range

Rated temperature

Voltage derating

Climatic category

Passive ﬂammability

Maximum pulse steepness:

Temperature coefﬁcient

Self-inductance

Dissipation factor tanδ

Insulation resistance

p d std I max I b

5.0 ± 0.4 0.5 5

-1

20 ± 0.4

7.5 ± 0.4 0.6 5

-1

20 ± 0.4

10.0 ± 0.4 0.6 5

-1

30 ± 0.4

15.0 ± 0.4 0.8 6

-1

30 ± 0.4

22.5 ± 0.4 0.8 6

-1

30 ± 0.4

27.5 ± 0.4 0.8 6

-1

30 ± 0.4

37.5 ± 0.5 1.0 6

-1

30 ± 0.7

∅ d

0.5

1 section construction 2 section construction

Summary of content (7 pages)

PAGE 1
PHE426 RoHS Compliant • Single metallized film pulse capacitor, polypropylene dielectric • According to IEC 60384-16, grade 1.1 L typical applications B Construction H Pulse operation in SMPS, TV, monitor, electrical ballast and other high frequency applications demanding stable operation. Polypropylene film capacitor with vacuum evaporated aluminum electrodes. Radial leads of tinned wire are electrically welded to the contact metal layer on the ends of the capacitor winding.
PAGE 2
PHE426 Derating of Urms vs frequency, +85°C ambient temperature and 10°C internal heating, typical values Urms (V) Urms (V) 250 VDC/160VAC 100 100 2.2 µF 4.7 µF 100 0.1 µF 10 400 VDC/450 VDC/220 VAC 0.012 µF 0.039 µF 0.1 µF 0.33 µF 10 Urms (V) 300 VDC/160 VAC 0.68 µF 0.056 µF 2.2 µF 4.7 µF 0.22 µF 0.82 µF 1 0.1 1.0 10 100 1 0.1 Frequency (kHz) Urms (V) 1.0 10 10 100 0.1 1.0 Urms (V) 2.
PAGE 3
PHE426 article table Capaci- Box Max dimensions Max Rthha Article code tance code in mm dU/dt °C/W µF B H L V/µs 85 °C 0.2 m/s 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.
PAGE 4
PHE426 article table Capaci- Box Max dimensions Max Rthha Article code tance code in mm dU/dt °C/W µF B H L V/µs 85 °C 0.2 m/s 2.2 2.7 2.7 3.3 3.9 4.7 5.6 6.8 6.8 8.2 10.0 10.0 F11 F11 F17 F12 F03 F03 F14 F14 F19 F15 F16 F18 250 VDC/160 VAC (1 Section) 300 VDC/160 VAC (1 Section) Lead spacing 27.5 mm Lead spacing 22.5 mm 10.5 10.5 21.0 11.5 13.5 13.5 17.5 17.5 27.5 19.0 21.0 31.0 20.5 20.5 12.5 22.5 23.0 23.0 28.0 28.0 16.0 29.0 30.0 19.0 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.
PAGE 5
PHE426 article table Capaci- Box Max dimensions Max Rthha Article code tance code in mm dU/dt °C/W µF B H L V/µs 85 °C 0.2 m/s 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 K01 K01 K01 K01 K01 K01 K01 K01 K01 K01 K01 K01 K01 K01 K01 K01 K01 K01 K03 K03 K03 K04 K04 400 VDC/220 VAC (1 Section) 400 VDC/220 VAC (1 Section) Lead spacing 7.5 mm Lead spacing 22.5 mm 4.0 4.0 4.0 4.0 4.0 4.0 4.
PAGE 6
PHE426 article table Capaci- Box Max dimensions Max Rthha Article code tance code in mm dU/dt °C/W µF B H L V/µs 85 °C 0.2 m/s 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 F11 F11 F11 F11 F11 F12 F03 F13 F14 F15 F16 450 VDC/220 VAC (1 Section) 630 VDC/250 VAC (1 Section) Lead spacing 27.5 mm Lead spacing 10 mm 10.5 10.5 10.5 10.5 10.5 11.5 13.5 14.5 17.5 19.0 21.0 20.5 20.5 20.5 20.5 20.5 22.5 23.0 24.5 28.0 29.0 30.0 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.
PAGE 7
PHE426 article table Capaci- Box Max dimensions Max Rthha Article code tance code in mm dU/dt °C/W µF B H L V/µs 85 °C 0.2 m/s 2.2 2.7 3.3 3.9 4.7 5.6 R02 R03 R03 R06 R08 R08 630 VDC/250 VAC (1 Section) 1000 VDC/250 VAC (1 Section) Lead spacing 37.5 mm Lead spacing 27.5 mm 16.5 19.0 19.0 21.0 28.0 28.0 32.0 36.0 36.0 38.0 43.0 43.0 41.0 41.0 41.0 41.0 41.0 41.