Datasheet

23© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3033_PHE450 • 8/15/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – General Purpose, Pulse and DC Transient Suppression
PHE450 Double Metallized Polypropylene Film
Lead Taping & Packaging (IEC 60286–2)
Taping Speci cation
Dimensions in mm
Standard IEC
60286–2
Lead spacing +6/−0.1 F 5 7.5 Formed 7.5 10 15 22.5 27.5 F
Carrier tape width +/−0.5 W 18 18 18 18 18 18 18 18
+1/-0.5
Hold-down tape width +/−0.3 W
0
9 9 9 12 12 12 12
Position of sprocket hole +/−0.5 W
1
9 9 9 9 9 9 9 9
+0.75/-0.5
Distance between tapes Maximum W
2
3 3 3 3 3 3 3 3
Sprocket hole diameter +/−0.2 D
0
4 4 4 4 4 4 4 4
Feed hole lead spacing +/−0.3 P
0
(1)
12.7 12.7 12.7
(4)
12.7 12.7 12.7 12.7 12.7
Distance lead – feed hole +/−0.7 P
1
3.85 3.75 3.75 7.7 5.2 5.3 5.3 P
1
Deviation tape – plane Maximum Δp 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3
Lateral deviation Maximum Δh 2 2 2 2 2 2 2 2
Total thickness +/−0.2 t 0.7 0.7 0.7 0.7 0.7 0.9
MAX
0.9
MAX
0.9
MAX
Sprocket hole/cap body Nominal H
0
(2)
18.5
+/-0.5
18.5
+/-0.5
18.5
+/-0.5
18.5
+/-0.5
18.5
+/-0.5
18.5
+/-0.5
18.5
+/-0.5
18
+2/-0
Sprocket hole/top of cap
body
Maximum H
1
(3)
32 31 43 43 43 58 58 58
MAX
(1) Maximum cumulative feed hole error, 1 mm per 20 parts.
(2) 16.5 mm available on request.
(3) Depending on case size.
(4) 15 mm available on request.
Lead Spacing 5 mm
Lead Spacing 7.5 mm
Lead Spacing 10 – 15mm
Lead Spacing 22.5 – 27.5 mm
Formed Leads from 10 and 15 mm to 7.5 mm
0
0
0
0
0