Datasheet

ManualsBrandsKEMET ManualsCapacitorsX2 Capacitor, 470nF, 300VAC, 760VDC, 20%

One world. One KEMET

Benets

• Approvals: ENEC, UL, cUL

• Rated voltage: 300 VAC 50/60 Hz

• Capacitance range: 0.01 – 2.2 µF

• Lead spacing: 15.0 – 37.5 mm

• Capacitance tolerance: ±20%, ±10%, ±5% on request

• Climatic category: 40/100/56, IEC 60068–1

• Tape and reel in accordance with IEC 60286–2

• RoHS Compliant and lead-free terminations

• Operatingtemperaturerangeof-40˚Cto+100˚C

• 100% screening factory test at 2,150 VDC

Overview

The PHE820E Series is constructed of series winding of

metallized polyester encapsulated in self-extinguishing material

meeting the requirements of UL 94 V–0.

Applications

Typical applications include worldwide use in electromagnetic

interference suppression in all X2 and across-the-line

applications.

AC Line EMI Suppression and RC Networks

PHE820E Series Metallized Polyester Film, Class X2, 300 VAC

Legacy Part Number System

PHE820 E B 5100 M R17

Series Rated Voltage (VAC) Lead Spacing (mm) Capacitance Code (pF)

Capacitance

Tolerance

Packaging

X2, Metallized Polyester

E = 300

B = 15.0

D = 22.5

F = 27.5

R = 37.5

The last three digits

representsignicant

gures.Therstdigit

speciesthetotal

number of digits.

J = ±5%

K = ±10%

M = ±20%

See Ordering

Options Table

New KEMET Part Number System

F 720

B D

103 M 300

Capacitor

Class

Series Lead Spacing (mm) Size Code Capacitance Code (pF)

Capacitance

Tolerance

Rated Voltage

(VAC)

Packaging

F = Film X2,

Metallized

Polyester

B = 15.0

D = 22.5

F = 27.5

R = 37.5

See Dimension

Table

First two digits represent

signicantgures.Thirddigit

speciesnumberofzeros.

J = ±5%

K = ±10%

M = ±20%

300 = 300 See Ordering

Options Table

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (14 pages)

PAGE 1
AC Line EMI Suppression and RC Networks PHE820E Series Metallized Polyester Film, Class X2, 300 VAC Overview Applications The PHE820E Series is constructed of series winding of metallized polyester encapsulated in self-extinguishing material meeting the requirements of UL 94 V–0. Typical applications include worldwide use in electromagnetic interference suppression in all X2 and across-the-line applications.
PAGE 2
Film Capacitors AC Line EMI Suppression and RC Networks – PHE820E Series Metallized Polyester Film, Class X2, 300 VAC Ordering Options Table Lead Spacing Nominal (mm) Type of Leads and Packaging Lead Length (mm) KEMET Legacy Lead and Lead and Packaging Packaging Code Code Standard Lead and Packaging Options Bulk (Bag) – Short Leads Bulk (Bag) – Long Leads 15 C A R06 R17 Other Lead and Packaging Options Bulk (Bag) – Max Length Leads Native 15 formed to 7.
PAGE 3
Film Capacitors AC Line EMI Suppression and RC Networks – PHE820E Series Metallized Polyester Film, Class X2, 300 VAC Dimensions – Millimeters FRONT VIEW SIDE VIEW L B H d 0.5 LL p p B H L d KEMET Size Code Legacy Size Code Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance BD BE BL BJ BQ DD DH DM DT FE FG FM FR RK RM B04 B05 B06 B10 B11 D13 D14 D15 D16 F11 F12 F13 F14 R02 R03 15 15 15 15 15 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 37.5 37.
PAGE 4
Film Capacitors AC Line EMI Suppression and RC Networks – PHE820E Series Metallized Polyester Film, Class X2, 300 VAC Performance Characteristics Rated Voltage Capacitance Range Capacitance Tolerance Temperature Range Climatic Category Approvals Dissipation Factor Test Voltage Between Terminals 300 VAC 50/60 Hz 0.01 – 2.2 µF ±20%, ±10%, ±5% on request -40ºC to +100°C 40/100/56 ENEC, UL, cUL Maximum Values at +23°C 1 kHz 1.0% The 100% screening factory test is carried out at 2,150 VDC.
PAGE 5
Film Capacitors AC Line EMI Suppression and RC Networks – PHE820E Series Metallized Polyester Film, Class X2, 300 VAC Approvals Mark Specification File Number EN/IEC 60384–14 SE/0140–12E UL 1414 (up to 1 μF, 85°C, 250 VAC) E73869 CSA – C22.2 No. 1 (up to 1 μF, 85°C, 250 VAC) E73869 UL 1283 (310 VAC) E100117 CSA – C22.2 No. 8 (310 VAC) E100117 Environmental Compliance All KEMET EMI capacitors are RoHS Compliant.
PAGE 6
Film Capacitors AC Line EMI Suppression and RC Networks – PHE820E Series Metallized Polyester Film, Class X2, 300 VAC Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 – 221ºC for the new alloys.
PAGE 7
Film Capacitors AC Line EMI Suppression and RC Networks – PHE820E Series Metallized Polyester Film, Class X2, 300 VAC Soldering Process cont'd Wave Soldering Recommendations cont'd 1.
PAGE 8
Single-sided Single-sided Metallized Metallized Polypropylene Polypropylene AC Line EMI Suppression and RC Networks Class X2, 300 VAC Film – PHE820E Series Metallized Polyester Film,Film Film Capacitors Double-sided Metallized Polyester Carrier Film Polyprop Film Diele Construction 3 Sections 3 Sections 4 Sections Molded Plastic Case Single-sided Metallized Polyester Film (First Layer) Detailed Cross Section Molded Plastic Case Self-Extinguishing Resin Single-sided Metallized Polyester Film (Seco
PAGE 9
Film Capacitors AC Line EMI Suppression and RC Networks – PHE820E Series Metallized Polyester Film, Class X2, 300 VAC Marking FRONT TOP RIFA Logo Series Rated Voltage IEC Climatic Category Approval Mark Capacitance Approval Mark © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.
PAGE 10
Film Capacitors AC Line EMI Suppression and RC Networks – PHE820E Series Metallized Polyester Film, Class X2, 300 VAC Packaging Quantities Large KEMET Legacy Bulk Bulk Standard Standard Lead Thickness Height Length Reel Ammo Size Size Short Long Reel Pizza Reel Spacing (mm) (mm) (mm) ø 500 Formed Code Code Leads Leads ø 360 mm Formed mm BD BE BL BJ BQ BM BV BG BY BU B04 B05 B06 B10 B11 B12 B14 B15 B16 B17 DD DH DM DT DF DR DY DW D13 D14 D15 D16 D17 D18 D19 D20 FK FE FG FM FR FS FV FH FT FQ F03 F11 F12
PAGE 11
Film Capacitors AC Line EMI Suppression and RC Networks – PHE820E Series Metallized Polyester Film, Class X2, 300 VAC Lead Taping & Packaging (IEC 60286–2) Lead Spacing 5 mm Lead Spacing 7.5 mm 0 0 Lead Spacing 22.5 – 27.5 mm Lead Spacing 10 – 15mm 0 0 Formed Leads from 10 and 15 mm to 7.5 mm 0 Taping Specification Standard IEC 60286–2 Dimensions in mm Lead spacing +6/-0.1 F 5 7.5 Formed 7.5 10 15 22.5 27.5 F Carrier tape width +/-0.5 W 18 18 18 18 18 18 18 18+1/-0.
PAGE 12
Film Capacitors AC Line EMI Suppression and RC Networks – PHE820E Series Metallized Polyester Film, Class X2, 300 VAC Lead Taping & Packaging (IEC 60286–2) cont'd Ammo Specifications Dimensions (mm) Series R4x, R4x+R, R7x, RSB F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx, SMR & PFR H W T 360 340 59 330 330 50 H T W Reel Specifications Dimensions (mm) Series R4x, R4x+R, R7x, RSB F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx, SMR & PFR D H W 355 500 30 25 55 (Max) 360 500 30 46 (
PAGE 13
Film Capacitors AC Line EMI Suppression and RC Networks – PHE820E Series Metallized Polyester Film, Class X2, 300 VAC KEMET Corporation World Headquarters Europe Asia Southern Europe Sasso Marconi, Italy Tel: 39-051-939111 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Skopje, Macedonia Tel: 389-2-55-14-623 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.
PAGE 14
Film Capacitors AC Line EMI Suppression and RC Networks – PHE820E Series Metallized Polyester Film, Class X2, 300 VAC Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.