Datasheet

49
RoHS
Compliant
PHE820 M PHE820 E
275 VAC 50/60 Hz 300 VAC 50/60 Hz
0.01 – 2.2 µF 0.01 – 2.2 µF
± 20% standard, ± 10% option
–40 to +100°C
40/100/56/B
ENEC, UL, CSA
≤ 1.0% at 1 kHz
C ≤ 0.33 µF ≥ 30 000 MΩ
C > 0.33 µF ≥ 10 000 s
Tabulated self-resonance frequencies f
0
refer to 5 mm lead length.
The 100% screening factory test is carried out at 2150 VDC. The
voltage level is selected to meet the requirements in applicable
equipment standards. All electrical characteristics are checked
after the test.
Recommended voltage ≤ 760 VDC
PHE820
• EMI suppressor, class X2, metallized polyester
• 0.01 – 2.2 µF, 275/300 VAC, +100°C
tyPiCal aPPliCations ConstruCtion
tECHniCal data
The capacitors are intended for use as
Interference suppressor in X2 and across-
the-line applications.
Series winding of metallized polyester,
encapsulated in self-extinguishing material
meeting the requirements of UL 94V-0.
Rated voltage
Capacitance range
Capacitance tolerance
Temperature range
Climatic category
Approvals
Dissipation factor tanδ
Insulation resistance
Resonance frequency
Test voltage between
terminals
In DC applications
EnvironmEntal tEst data
Endurance IEC 60384-14 1.25 x U
R
VAC 50 Hz,
once every hour increased
to 1000 VAC for 0.1 s,
1000 h at upper rated temp.
Vibration IEC 60068–2–6 3 directions at 2 hours No visible damage
Test Fc each, 10 – 55 Hz at No open or short circuit
0.75 mm or 98 m/s
2
Bump IEC 60068–2–29 1000 bumps at No visible damage
Test Eb 390 m/s
2
No open or short circuit
Change of IEC 60068–2–14 Upper and lower rated No visible damage
temperature Test Na temperature 5 cycles
Active EN 132400
flammability
Passive IEC 60384-14
flammability EN 132400
Humidity IEC 60068-2-3 +40°C and 56 days
Test Ca 90 – 95% R.H.
L
H
B
p
l
∅ d
0.5
b
+0
–1
+5
–0
p d std l max l b
15.0 ± 0.4 0.8 17 30 ±0.4
22.5 ± 0.4 0.8 6 30 ±0.4
27.5 ± 0.4 0.8 6 30 ±0.4
37.5 ± 0.5 1.0 6 30 ±0.7
Tolerance in lead length
< 30 mm mm
30 mm mm