Datasheet

ManualsBrandsKEMET ManualsCapacitorsX2 Capacitor, 1uF, 300VAC, 760VDC, 20%

RoHS

Compliant

Rated voltage 300 VAC 50/60 Hz

Capacitance range 0.01 – 10 µF

Capacitance tolerance ± 20% standard, ± 10% option

Temperature range –55 to +105°C

Climatic category 55/105/56/B

Approvals

ENEC, UL, cUL

Dissipation factor tanδ Maximum values at +23°C

C ≤ 0.1 µF 0.1µF < C ≤ 1 µF C > 1 µF

1 kHz 0.1% 0.1% 0.1%

10 kHz 0.2% 0.4% 0.8%

100 kHz 0.6% – –

Test voltage between The 100% screening factory test is carried out at

terminals

2200 VDC. The voltage level is selected to meet the

requirements in applicable equipment standards. All

electrical characteristics are checked after the test.

Resonance frequency Tabulated self-resonance frequencies f

refer to

5 mm lead length.

Insulation resistance

C ≤ 0.33 µF:

≥ 30 000 MΩ

C > 0.33 µF: ≥ 10 000 s

In DC applications Recommended voltage ≤ 760 VDC

pHE840E

• EMI suppressor, class X2, metallized polypropylene

• 0.01 – 10 µF, 300 VAC, +105°C

• New improved design: small dimensions including low proﬁle capacitors

tYpiCaL appLiCations ConstRuCtion

tECHniCaL data

For worldwide use as electromagnetic

interference suppressor in all X2 and

across-the-line applications.

encapsulated in self-extinguishing material

meeting the requirements of UL 94 V–0.

EnViRonmEntaL tEst data

Endurance EN/IEC 60384-14:2005 1.25 x U

VAC 50 Hz, once every hour

increased to 1000 VAC for 0.1 s,

1000 h at upper rated temperature

Vibration IEC 60068–2–6 3 directions at 2 hours each, No visible damage

Test Fc 10–55 Hz at 0.75 mm or 98 m/s

No open or short circuit

Bump IEC 60068–2–29 1000 bumps at No visible damage

Test Eb 390 m/s

No open or short circuit

Change of temperature IEC 60068–2–14 Upper and lower rated No visible damage

Test Na temperature 5 cycles

Active ﬂammability EN/IEC 60384-14:2005

Passive ﬂammability Enclosure material of

EN/IEC 60384-14:2005

UL94V–0 ﬂammability class

Humidity IEC 60068-2-3 +40°C and 56 days

Test Ca 90 – 95% R.H.

P d std l max l b

10.0 ± 0.4 0.6 17 30 ±0.4

15.0 ± 0.4 0.8 17 30 ±0.4

22.5 ± 0.4 0.8 6 30 ±0.4

27.5 ± 0.4 0.8 6 30 ±0.4

37.5 ± 0.5 1.0 6 30 ±0.7

Tolerance in lead length

< 30 mm mm

30 mm mm

–1

–0

∅ d

0.5

Not for use in series with the mains.

See www.kemet.com for more information.

Metallized polypropylene winding,

Summary of content (2 pages)

PAGE 1
PHE840E RoHS Compliant • EMI suppressor, class X2, metallized polypropylene • 0.01 – 10 µF, 300 VAC, +105°C • New improved design: small dimensions including low profile capacitors L typical applications For worldwide use as electromagnetic interference suppressor in all X2 and across-the-line applications. B Construction Metallized polypropylene winding, encapsulated in self-extinguishing material meeting the requirements of UL 94 V–0. H Not for use in series with the mains. See www.kemet.
PAGE 2
phe840E article table Capaci- Box Max dimensions Max tance code in mm fO dU/dt Article code µF B H L MHz V/µs Capaci- Box Max dimensions Max tance code in mm fO dU/dt Article code µF B H L MHz V/µs Lead spacing 10 mm 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 A01 A01 A01 A01 A01 A02 A02 A03 A03 A04 A04 4.0 4.0 4.0 4.0 4.0 4.5 4.5 5.0 5.0 6.0 6.0 9.0 9.0 9.0 9.0 9.0 10.5 10.5 11.0 11.0 12.0 12.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 11 10 9.4 8.9 8.