Datasheet

ManualsBrandsKEMET ManualsCapacitorsX1 Capacitor, 220nF, 440VAC, 1kVDC, 20%

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3108_PHE844_X1_440-480 • 2/28/2019

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

One world. One KEMET

Benets

• Approvals: ENEC, UL, cUL

• Class X1 (IEC 60384-14)

• Rated voltage: 440 VAC 50/60 Hz (ENEC), 480 VAC

50/60 Hz (UL, cUL)

• Capacitance range: 0.1 – 2.2 µF

• Lead spacing: 22.5 – 37.5 mm

• Capacitance tolerance: ±20%, ±10%

• Climatic category 40/105/56/B, IEC 60068–1

• Tape & Reel in accordance with IEC 60286–2

• RoHS Compliant and lead-free terminations

• Operatingtemperaturerangeof−40°Cto+105°C

• 100% screening factory test at 3,000 VDC

• Self-healing properties

Overview

The PHE844 series is constructed of metallized

polypropylenelmencapsulatedwithself-extinguishing

resininaboxofmaterialthatmeetstherequirementsof

UL 94 V–0.

Applications

For use as an electromagnetic interference (EMI)

suppressionlterinacross-the-lineapplicationsthat

requireX1safetyclassication.Suitableforusein

situations in which capacitor failure does not pose a

danger of electric shock.

Metallized Polypropylene Film EMI Suppression Capacitors

PHE844, Class X1, 440/480 VAC, 105°C

Customer Part Number

PHE844 R D 6100 M R06L2

Series Rated Voltage (VAC) Lead Spacing (mm) Capacitance Code (pF)

Capacitance

Tolerance

Packaging

X1, Metallized

Polypropylene

R = 440 D = 22.5

F = 27.5

R = 37.5

The last three digits

representsignicant

gures.Therstdigit

speciesthetotal

number of digits.

K = ±10%

M = ±20%

See Ordering Options

Table

KEMET Internal Part Number

F 844 D H 104 M 440 C

Capacitor

Class

Series

Lead Spacing

(mm)

Size Code Capacitance Code (pF)

Capacitance

Tolerance

Rated Voltage

(VAC)

Packaging

F = Film X1, Metallized

Polypropylene

D = 22.5

F = 27.5

R = 37.5

See

Dimension

Table

Thersttwodigits

representsignicant

gures.Thethirddigit

speciesnumberofzeros.

K = ±10%

M = ±20%

440 = 440 See Ordering

Options Table

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (13 pages)

PAGE 1
Metallized Polypropylene Film EMI Suppression Capacitors PHE844, Class X1, 440/480 VAC, 105°C Overview Applications The PHE844 series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material that meets the requirements of UL 94 V–0. For use as an electromagnetic interference (EMI) suppression filter in across-the-line applications that require X1 safety classification.
PAGE 2
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors PHE844, Class X1, 440/480 VAC, 105°C Ordering Options Table Lead Spacing Nominal (mm) Lead Length (mm) KEMET Lead and Packaging Code Legacy Lead and Packaging Code 6 +0/-1 C R06L2(1) Pizza Pack 6 +0/−1 Z R06L2(1) Bulk (Tray)–Long Leads 30 +0/−1 ALW0L R30L2 Tape & Reel (Standard Reel) H0= 18.5 ±0.5 L R17T0 Tape & Reel (Large Reel) H0= 18.5 ±0.
PAGE 3
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors PHE844, Class X1, 440/480 VAC, 105°C Dimensions – Millimeters FRONT VIEW SIDE VIEW L B H d 0.5 LL p KEMET Size Code Legacy Size Code DH DM DT DW DY FE FK FM FR FV RF RH RM RP D14 D15 D16 D20 D19 F11 F03 F13 F14 F16 R05 R04 R03 R06 p B H L d Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 ±0.4 ±0.4 ±0.4 ±0.
PAGE 4
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors PHE844, Class X1, 440/480 VAC, 105°C Performance Characteristics Dielectric Plates Winding Leads Protection Rated Voltage VR Polypropylene film Metal layer deposited by evaporation under vacuum Non-inductive type. Series design. Tinned wire Plastic case, thermosetting resin-filled. Box material is solvent-resistant and flame-retardant according to UL94 V–0. 440 VAC 50/60 Hz (ENEC) – 480 VAC 50/60 Hz (UL,cUL) Capacitance Range 0.
PAGE 5
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors PHE844, Class X1, 440/480 VAC, 105°C Environmental Test Data Test IEC Publication Procedure Endurance IEC 60384-14:2005 Vibration IEC 60068-2-6 Test Fc Bump IEC 60068-2-29 Test Eb Change of Temperature IEC 60068-2-14 Test Na Active Flammability IEC 60384-14:2005 VR + 20 surge pulses at 4 kV (pulse every 5 seconds) Passive Flammability IEC 60384-14:2005 IEC 60384–1, IEC 60695–11–5 Needle Flame Test Damp Heat Steady S
PAGE 6
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors PHE844, Class X1, 440/480 VAC, 105°C Table 1 – Ratings & Part Number Reference Capacitance Value (µF) Size Code (New/ Legacy) 0.10 0.15 0.22 0.33 0.47 0.22 0.33 0.47 0.68 1.0 0.47 0.68 1.0 1.5 2.
PAGE 7
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors PHE844, Class X1, 440/480 VAC, 105°C Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAuCu (SAC) alloys or SnCu alloys as primary solder. This implementation has increased the liquidus temperature from 183ºC for SnPb eutectic alloys to 217 – 221ºC for the new alloys.
PAGE 8
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors PHE844, Class X1, 440/480 VAC, 105°C Soldering Process cont'd Wave Soldering Recommendations cont'd 1. The table indicates the maximum set-up temperature of the soldering process.
PAGE 9
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors PHE844, Class X1, 440/480 VAC, 105°C Construction Molded Plastic Case Single-sided Metallized Polypropylene Film (First Layer) Detailed Cross Section Molded Plastic Self-Extinguishing Case Resin Single-sided Metallized Polypropylene Film (Second Layer) Margin Margin Metal Contact Layer Metal Contact Layer Margin FILM WINDING SCHEME OPTIONS Leads tallized Polypropylene Film Double-sided Metallized Polyester Film Winding Sch
PAGE 10
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors PHE844, Class X1, 440/480 VAC, 105°C Marking FRONT TOP RIFA Logo Approval Mark Series Rated Voltage IEC Climatic Category Capacitance Approval Mark Capacitance Tolerance Manufacturing Date Code Manufacturing Date Code (IEC-60062) Y = Year, Z = Month Year Code Month Code 2000 2001 M January 1 N February 2 2002 P March 3 2003 R April 4 2004 S May 5 2005 T June 6 2006 U July 7 2007 V August 8
PAGE 11
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors PHE844, Class X1, 440/480 VAC, 105°C Packaging Quantities Lead Spacing KEMET Legacy Thickness Size Code Size Code (mm) Height (mm) Length (mm) Bulk Short Leads 22.5 DD DH DM DT DF DR DY DW D13 D14 D15 D16 D17 D18 D19 D20 6.5 8.0 9.0 11.0 7.0 10.5 15.5 13.5 14.5 16.0 18.5 21.5 16.5 19.0 24.5 23.0 26.0 26.0 26.0 26.0 26.0 26.0 26.0 26.0 234 186 308 253 216 264 176 209 27.
PAGE 12
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors 0 PHE844, Class X1, 440/480 VAC, 105°C Lead Taping & Packaging (IEC 60286-2) Lead Spacing 22.5 – 27.5 mm 0 rom 10 and 15 mmSpecification to 7.5 mm Taping Description Dimensions (mm) Symbol Lead Space 22.5 27.5 Tolerance Lead Spacing F 22.5 27.5 +0.6/−0.1 Carrier Tape Width W 18 18 +1/−0.5 Hold Down Tape Width W0 5 5 Minimum Hole Position W1 9 9 +0.75/−0.
PAGE 13
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors PHE844, Class X1, 440/480 VAC, 105°C KEMET Electronics Corporation Sales Oﬃces For a complete list of our global sales oﬃces, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.