Datasheet

ManualsBrandsKEMET ManualsCapacitorsCapacitor 47nF, 10%, 220VAC

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3070_PME261 • 1/17/2019

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

One world. One KEMET

Benets

• Voltage range: 400 – 1,000 VDC; 220 – 500 VAC

• Capacitance range: 0.001 – 1 µF

• Lead spacing: 10.2 – 25.4 mm

• Capacitance tolerance: ±10%, ±20%, ±5% on request

• Climatic category: 40/70/56, IEC 60068–1

• Tape & Reel packaging in accordance with IEC 60286–2

• RoHS compliant and lead-free terminations

• Operatingtemperaturerangeof−40°Cto+70°Cin

AC applications

Overview

Multilayer metalized paper, encapsulated and infused in

self-extinguishing material, meeting the requirements of

UL 94V-0.

Applications

For general use in DC and low frequency pulse applications.

General Purpose AC/DC, Metallized Paper

PME261, 10.2 – 25.4 mm Lead Spacing, 400 – 1,000 VDC

Legacy Part Number System

PME261 K A 5100 K R30

Series Rated Voltage (VAC) Lead Spacing (mm) Capacitance Code (pF)

Capacitance

Tolerance

Packaging

Metallized Paper K = 220

E = 300

J = 500

A = 10.2

B = 15.2

C = 20.3

E = 25.4

The last three digits

representsignicant

gures.Firstdigit

speciesthetotal

number of digits in the

capacitance value.

J = ±5%

K = ±10%

M = ±20%

See Ordering

Options Table

New KEMET Part Number System

P 561 H E 103 K 220 A

Capacitor

Class

Series

Lead Spacing

(mm)

Size Code Capacitance Code (pF)

Capacitance

Tolerance

Rated Voltage

(VAC)

Packaging

P = Paper Metallized

Paper

General

Purpose

H = 10.2

Q = 15.2

C = 20.3

E = 25.4

See

Dimension

Table

First two digits indicate the two

mostsignicantdigitsofthe

capacitance value in picofarads.

The third digit is the number of

following zeroes.

J = ±5%

K = ±10%

M = ±20%

220 = 220

300 = 300

500 = 500

See Ordering

Options

Table

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (13 pages)

PAGE 1
General Purpose AC/DC, Metallized Paper PME261, 10.2 – 25.4 mm Lead Spacing, 400 – 1,000 VDC Overview Applications Multilayer metalized paper, encapsulated and infused in self-extinguishing material, meeting the requirements of UL 94V-0. For general use in DC and low frequency pulse applications. Benefits • • • • • • • • Voltage range: 400 – 1,000 VDC; 220 – 500 VAC Capacitance range: 0.001 – 1 µF Lead spacing: 10.2 – 25.
PAGE 2
Film Capacitors – General Purpose AC/DC, Metallized Paper PME261, 10.2 – 25.4 mm Lead Spacing, 400 – 1,000 VDC Benefits cont'd • Operating temperature range of −40°C to +100°C in DC • Approved according to SE–MIL–QPL applications • The capacitors meet the most stringent IEC humidity class, • Excellent self-healing properties. Ensures long life even 56 days when subjected to frequent over-voltages.
PAGE 3
Film Capacitors – General Purpose AC/DC, Metallized Paper PME261, 10.2 – 25.4 mm Lead Spacing, 400 – 1,000 VDC Dimensions – Millimeters FRONT VIEW SIDE VIEW L B H d LL p Size Code HE HL QE QM QP CE CG CJ CP EH EL p B H L d Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 10.2 10.2 15.2 15.2 15.2 20.3 20.3 20.3 20.3 25.4 25.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 3.9 5.1 5.2 7.3 7.8 7.6 8.4 9.0 11.3 10.6 15.
PAGE 4
Film Capacitors – General Purpose AC/DC, Metallized Paper PME261, 10.2 – 25.4 mm Lead Spacing, 400 – 1,000 VDC Performance Characteristics Rated voltage VR (VDC) 400 630 1000 Rated voltage VR (VAC) 220 300 500 Capacitance range (µF) 0.0082 – 1.0 0.001 – 0.15 0.001 – 0.1 Capacitance tolerance Temperature range Climatic category ±10%, ±20%, ±5% on request −40 to +70°C −40 to +100°C 40/070/56 Maximum Values at +23°C Dissipation factor tanδ 1 kHz 1.
PAGE 5
Film Capacitors – General Purpose AC/DC, Metallized Paper PME261, 10.2 – 25.4 mm Lead Spacing, 400 – 1,000 VDC Table 1 – Ratings & Part Number Reference Capacitance Value (µF) Maximum Dimensions in mm B H L Lead Spacing (p) dV/dt (V/µs) New Kemet Part Number Legacy Part Number 0.0082 0.010 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.01 0.015 0.022 0.033 0.
PAGE 6
Film Capacitors – General Purpose AC/DC, Metallized Paper PME261, 10.2 – 25.4 mm Lead Spacing, 400 – 1,000 VDC Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAuCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 – 221°C for the new alloys.
PAGE 7
Film Capacitors – General Purpose AC/DC, Metallized Paper PME261, 10.2 – 25.4 mm Lead Spacing, 400 – 1,000 VDC Soldering Process cont'd Wave Soldering Recommendations cont'd 1.
PAGE 8
Single-sided Metallized Polypropylene Film Double-sided Film Capacitors – General Purpose AC/DC, Metallized Paper PME261, 10.2 – 25.
PAGE 9
Film Capacitors – General Purpose AC/DC, Metallized Paper PME261, 10.2 – 25.4 mm Lead Spacing, 400 – 1,000 VDC Marking FRONT BACK Voltage RIFA logo IEC climatic category Series Dielectric code Manufacturing date code Voltage Manufacturing code plant TOP Capacitance © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.
PAGE 10
Film Capacitors – General Purpose AC/DC, Metallized Paper PME261, 10.2 – 25.4 mm Lead Spacing, 400 – 1,000 VDC Packaging Quantities Lead Spacing (mm) Thickness (mm) Height (mm) Length (mm) Bulk Short Leads Bulk Long Leads Standard Reel ø 360 mm Large Reel ø 500 mm Ammo Formed 7.5 8.2 10.5 13.5 13.5 13.5 2,000 2,000 1,600 1,000 1,000 800 700 600 600 1,400 10.2 3.9 4.1 5.1 800 780 630 5.5 6.5 7.5 8.5 5.2 5.5 6.0 7.3 7.8 8.5 12.5 12.5 14.5 16.0 10.5 11.0 12.5 13.0 13.5 14.3 18.0 18.0 18.
PAGE 11
Film Capacitors – General Purpose AC/DC, Metallized Paper PME261, 10.2 – 25.4 mm Lead Spacing, 400 – 1,000 VDC Lead Taping & Packaging (IEC 60286–2) Lead Spacing 20.3 – 22.5 mm Lead Spacing 10.2 – 15.2 mm ∆p ∆p ∆h ∆p ∆h ∆p ∆h ∆h W H1 W2 F H0 H1 F H0 W0 W1 W2 W0 W1 W P1 D0 P0 P0 P1 D0 W D0 t t Formed Leads from 10.2 to 7.5 mm ∆p ∆p ∆h W2 H1 W0 ∆h W1 F = 7.5 H0 W P0 P1 D0 Taping Specification Dimensions in mm +6/−0.1 F Carrier tape width ±0.5 W Formed 7.
PAGE 12
Film Capacitors – General Purpose AC/DC, Metallized Paper PME261, 10.2 – 25.
PAGE 13
Film Capacitors – General Purpose AC/DC, Metallized Paper PME261, 10.2 – 25.4 mm Lead Spacing, 400 – 1,000 VDC KEMET Electronics Corporation Sales Oﬃces For a complete list of our global sales oﬃces, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.