Datasheet

ManualsBrandsKEMET ManualsCapacitorsX1 capacitor, 100nF, 300VAC, 630VDC, 20%

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3014_PME271E_X1_300 • 3/15/2019

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

One world. One KEMET

Benets

• Approvals: ENEC, UL

• Rated voltage: 300 VAC 50/60 Hz

• Capacitance range: 0.01µF – 0.22 µF

• Lead Spacing: 15.2 – 25.4 mm

• Capacitancetolerance:±20%forC≤0.1µF,

±10% for C > 0.1 µF

• Climatic category: 40/110/56/B, IEC 60068–1

• Tape & Reel packaging in accordance with IEC 60286–2

• RoHS compliance and lead-free terminations

• Operatingtemperaturerangeof−40°Cto+110°C

• 100% screening factory test at 2,150 VDC

• Highest possible safety regarding active and passive

ammability

Overview

Multilayer metallized paper encapsulated and impregnated in

self-extinguishing material, meeting the requirements of

UL 94 V–0.

Applications

For worldwide use as an electromagnetic interference

suppressor in all X1 and across-the-line applications.

AC Line EMI Suppression and RC Networks

PME271E, Metallized Impregnated Paper,

Class X1, 300 VAC

Customer Part Number

PME271 E (D) 510(0) M R30

Series Rated Voltage (VAC) Lead Spacing (mm) Capacitance Code (pF)

Capacitance

Tolerance

Packaging

X1, Metallized Paper E = 300 Blank = Standard

D = 22.5

The last three digits

representsignicant

gures.Therstdigit

speciesthetotal

number of digits.

M = ±20%

(forC≤0.1µF)

K = ±10%

(for C > 0.1 µF)

See Ordering

Options Table

KEMET Internal Part Number

P 277 Q E 103 M 300 A

Capacitor Class Series

Lead Spacing

(mm)

Size Code

Capacitance

Code (pF)

Capacitance

Tolerance

Rated Voltage

(VAC)

Packaging

P = Paper X1, Metallized

Paper

Q = 15.2

C = 20.3

S = 22.5

E = 25.4

See Dimension

Table

First two digits

represent

signicant

gures.Third

digitspecies

number of

zeros.

M = ±20%

(forC≤0.1µF)

K = ±10%

(for C > 0.1 µF)

300 = 300 See Ordering

Options Table

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (12 pages)

PAGE 1
AC Line EMI Suppression and RC Networks PME271E, Metallized Impregnated Paper, Class X1, 300 VAC Overview Applications Multilayer metallized paper encapsulated and impregnated in self-extinguishing material, meeting the requirements of UL 94 V–0. For worldwide use as an electromagnetic interference suppressor in all X1 and across-the-line applications. Benefits • • • • • • • • • • • Approvals: ENEC, UL Rated voltage: 300 VAC 50/60 Hz Capacitance range: 0.01µF – 0.22 µF Lead Spacing: 15.2 – 25.
PAGE 2
Film Capacitors – AC Line EMI Suppression and RC Networks PME271E Series Metallized Impregnated Paper, Class X1, 300 VAC Benefits cont'd • Excellent self-healing properties which ensure long life even when subjected to frequent overvoltages • Good resistance to ionization due to impregnated paper dielectric • High dv/dt capability • Impregnated paper ensures excellent stability and reliability properties, particularly in applications with continuous operation Ordering Options Table Lead Spacing Nominal (
PAGE 3
Film Capacitors – AC Line EMI Suppression and RC Networks PME271E Series Metallized Impregnated Paper, Class X1, 300 VAC Dimensions – Millimeters FRONT VIEW SIDE VIEW L B H d LL p Size Code QE QN QS CE CP SJ SP SU EE EJ p B H L d Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 15.2 15.2 15.2 20.3 20.3 22.5 22.5 22.5 25.4 25.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 5.2 7.3 8.5 7.6 11.3 8.0 10.0 12.0 10.6 12.
PAGE 4
Film Capacitors – AC Line EMI Suppression and RC Networks PME271E Series Metallized Impregnated Paper, Class X1, 300 VAC Performance Characteristics Rated Voltage Capacitance Range Capacitance Tolerance Temperature Range Climatic Category Approvals Dissipation Factor Test Voltage Between Terminals 300 VAC 50/60 Hz 0.01 – 0.22 µF ±20% for C ≤ 0.1 µF, ±10% for C > 0.1 µF −40°C to +110°C 40/110/56/B ENEC, UL Maximum Values at +23°C 1 kHz 1.3% The 100% screening factory test is carried out at 2,150 VDC.
PAGE 5
Film Capacitors – AC Line EMI Suppression and RC Networks PME271E Series Metallized Impregnated Paper, Class X1, 300 VAC Approvals Mark Specification File Number EN/IEC 60384–14 SE/0140–15D UL 60384–14 CAN/CSA–E60384–14–09 E73869 Environmental Compliance All KEMET EMI capacitors are RoHS Compliant. Table 1 – Ratings & Part Number Reference Capacitance Value (µF) Maximum Dimensions in mm Lead Spacing (p) fo (MHz) dV/dt (V/µs) New KEMET Part Number Legacy Part Number B H L 0.010 0.015 0.
PAGE 6
Film Capacitors – AC Line EMI Suppression and RC Networks PME271E Series Metallized Impregnated Paper, Class X1, 300 VAC Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAuCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 – 221ºC for the new alloys.
PAGE 7
Film Capacitors – AC Line EMI Suppression and RC Networks PME271E Series Metallized Impregnated Paper, Class X1, 300 VAC Soldering Process cont'd Wave Soldering Recommendations cont'd 1. The table indicates the maximum setup temperature for the soldering process.
PAGE 8
Film Capacitors – AC Line EMI Suppression and RC Networks PME271E Series Metallized Impregnated Paper, Class X1, 300 VAC Construction Detailed Cross Section Metallized Impregnated Paper (First Layer) Self-Extinguishing Resin Self-Extinguishing Resin Metallized Impregnated Paper (Second Layer) Margin Margin Metal Contact Layer Margin Leads Metal Contact Layer Winding Scheme Metal Spraying Material Metallization Impregnated Paper Single Design — Multilayer Impregnated Paper Dielectric 1 Section ©
PAGE 9
Film Capacitors – AC Line EMI Suppression and RC Networks PME271E Series Metallized Impregnated Paper, Class X1, 300 VAC Marking FRONT BACK Self Healing Voltage Series IEC Climatic Category Approval Mark Approval Mark Manufacturing Date Code TOP Capacitance Safety Class Packaging Quantities Lead Spacing (mm) Thickness (mm) Height (mm) Length (mm) Bulk Short Leads Bulk Long Leads Standard Reel 360 mm 15.2 5.5 6.5 7.5 8.5 5.2 5.5 6.0 7.3 7.8 8.5 12.5 12.5 14.5 16.0 10.5 11.1 12.5 13.0 13.
PAGE 10
Film Capacitors – AC Line EMI Suppression and RC Networks PME271E Series Metallized Impregnated Paper, Class X1, 300 VAC Lead Taping & Packaging (IEC 60286–2) Lead Spacing 20.3 – 22.5 mm Lead Spacing 10.2 – 15.2 mm ∆p ∆p ∆h ∆p ∆h ∆p ∆h ∆h W H1 W2 F H0 H1 F H0 W0 W1 W2 W0 W1 W P1 D0 P0 P0 P1 D0 W D0 t t Formed Leads from 10.2 – 7.5 mm ∆p ∆p ∆h W2 H1 W0 ∆h W1 F = 7.5 H0 W P0 P1 D0 Taping Specification Standard IEC 60286–2 Dimensions in mm Lead Spacing +6/−0.
PAGE 11
Film Capacitors – AC Line EMI Suppression and RC Networks PME271E Series Metallized Impregnated Paper, Class X1, 300 VAC Lead Taping & Packaging (IEC 60286–2) cont'd Ammo Specifications Dimensions (mm) Series R4x, R4x+R, R7x, RSB F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx H W T 360 340 59 330 330 50 H T W Reel Specifications Dimensions (mm) Series R4x, R4x+R, R7x, RSB F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx D H W 355 500 30 25 55 (Max) 360 500 30 46 (Max) D H W Manu
PAGE 12
Film Capacitors – AC Line EMI Suppression and RC Networks PME271E Series Metallized Impregnated Paper, Class X1, 300 VAC KEMET Electronics Corporation Sales Oﬃces For a complete list of our global sales oﬃces, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.