Datasheet

ManualsBrandsKEMET ManualsCapacitorsX2 Capacitor, 1nF, 275VAC, 630VDC, 20%

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3011_PME271M_X2_275 • 1/14/2019

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

One world. One KEMET

Benets

• Approvals: ENEC, UL, cUL

• Rated voltage: 275 VAC 50/60 Hz

• Capacitance range: 0.001 - 0.6 µF

• Lead spacing: 10.2 – 25.4 mm

• Capacitancetolerance:M=±20%(forC≤0.1µF),

K=±10%(forC>0.1µF)

• Climatic category: 40/110/56, IEC 60068–1

• Tape and reel in accordance with IEC 60286–2

• RoHS Compliant and lead-free terminations

• Operatingtemperaturerangeof−40°C to +110°C

• 100% screening factory test at 2,150 VDC

Overview

The PME271M is constructed of multilayer metallized paper

encapsulated and impregnated in self-extinguishing material

meeting the requirements of UL 94 V–0.

Applications

Typical applications include worldwide use in

electromagnetic interference suppression in all X2 and

across-the-line applications.

AC Line EMI Suppression and RC Networks

PME271M, Metallized Impregnated Paper,

Class X2, 275 VAC

Legacy Part Number System

PME271 M (B) 610(0) M R30

Series RatedVoltage(VAC) LeadSpacing(mm) CapacitanceCode(pF)

Capacitance

Tolerance

Packaging

X2, Metallized Paper M = 275 Blank = Standard

A = 10.2

B = 15.2

D = 22.5

The last three digits

representsignicant

gures.Therstdigit

speciesthetotal

number of digits.

M = ±20%

(forC≤0.1µF)

K = ±10%

(forC>0.1µF)

See Ordering

Options Table

New KEMET Part Number System

P 276 Q E 104 M 275 A

Capacitor Class Series

Lead Spacing

(mm)

Size Code

Capacitance

Code(pF)

Capacitance

Tolerance

Rated Voltage

(VAC)

Packaging

P = Paper X2, Metallized

Paper

H = 10.2

Q = 15.2

C = 20.3

S = 22.5

E = 25.4

See Dimension

Table

First two digits

represent

signicant

gures.Third

digitspecies

number of

zeros.

M = ±20%

(forC≤0.1µF)

K = ±10%

(forC>0.1µF)

275 = 275 See Ordering

Options Table

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (13 pages)

PAGE 1
AC Line EMI Suppression and RC Networks PME271M, Metallized Impregnated Paper, Class X2, 275 VAC Overview Applications The PME271M is constructed of multilayer metallized paper encapsulated and impregnated in self-extinguishing material meeting the requirements of UL 94 V–0. Typical applications include worldwide use in electromagnetic interference suppression in all X2 and across-the-line applications.
PAGE 2
Film Capacitors – AC Line EMI Suppression and RC Networks PME271M, Metallized Impregnated Paper, Class X2, 275 VAC Benefits cont'd • The highest possible safety regarding active and passive • High dV/dt capability flammability • The impregnated paper ensures excellent stability and • Excellent self-healing properties ensure long life even when outstanding reliability properties, especially in applications subjected to frequent over voltages with continuous operation • Good resistance to ionization due to i
PAGE 3
Film Capacitors – AC Line EMI Suppression and RC Networks PME271M, Metallized Impregnated Paper, Class X2, 275 VAC Dimensions – Millimeters FRONT VIEW SIDE VIEW L B H d LL p Size Code HE HH HL QE QL QP QS CE CJ CP SJ SP SU EG EJ EL p B H L d Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 10.2 10.2 10.2 15.2 15.2 15.2 15.2 20.3 20.3 20.3 22.5 22.5 22.5 25.4 25.4 25.4 +/−0.4 +/−0.4 +/−0.4 +/−0.4 +/−0.4 +/−0.4 +/−0.4 +/−0.4 +/−0.4 +/−0.4 +/−0.
PAGE 4
Film Capacitors – AC Line EMI Suppression and RC Networks PME271M, Metallized Impregnated Paper, Class X2, 275 VAC Performance Characteristics Rated Voltage Capacitance Range Capacitance Tolerance Temperature Range Climatic Category Approvals Dissipation Factor Test Voltage Between Terminals 275 VAC 50/60 Hz 0.001 – 0.6 µF ±20%, ±10%, ±5% on request −40°C to +110°C 40/110/56 ENEC, UL, cUL Maximum Values at +23°C 1 kHz 1.3% The 100% screening factory test is carried out at 2,150 VDC.
PAGE 5
Film Capacitors – AC Line EMI Suppression and RC Networks PME271M, Metallized Impregnated Paper, Class X2, 275 VAC Approvals Mark Specification File Number EN/IEC 60384–14 SE/0140–16D UL 60384–14 CAN/CSA–E60384–14–09 E73869 Environmental Compliance All KEMET EMI capacitors are RoHS Compliant. Table 1 – Ratings & Part Number Reference Maximum Dimensions in mm B H L Lead Spacing (p) 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.0068 0.010 0.015 0.022 0.033 0.047 0.068 0.1 0.1 0.15 0.22 0.1 0.15 0.
PAGE 6
Film Capacitors – AC Line EMI Suppression and RC Networks PME271M, Metallized Impregnated Paper, Class X2, 275 VAC Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 – 221°C for the new alloys.
PAGE 7
Film Capacitors – AC Line EMI Suppression and RC Networks PME271M, Metallized Impregnated Paper, Class X2, 275 VAC Soldering Process cont'd Wave Soldering Recommendations cont'd 1.
PAGE 8
Film Capacitors – AC Line EMI Suppression and RC Networks PME271M, Metallized Impregnated Paper, Class X2, 275 VAC Construction Detailed Cross Section Metallized Impregnated Paper (First Layer) Self-Extinguishing Resin Self-Extinguishing Resin Metallized Impregnated Paper (Second Layer) Margin Margin Metal Contact Layer Margin Leads Metal Contact Layer Winding Scheme Metal Spraying Material Metallization Impregnated Paper Single Design — Multilayer Impregnated Paper Dielectric 1 Section © KEMET
PAGE 9
Film Capacitors – AC Line EMI Suppression and RC Networks PME271M, Metallized Impregnated Paper, Class X2, 275 VAC Marking FRONT Series IEC Climatic Category BACK Voltage Self Healing Approval Mark Approval Mark Manufacturing Date Code TOP Capacitance © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.
PAGE 10
Film Capacitors – AC Line EMI Suppression and RC Networks PME271M, Metallized Impregnated Paper, Class X2, 275 VAC Packaging Quantities Lead Spacing (mm) Thickness (mm) Height (mm) Length (mm) Bulk Short Leads Bulk Long Leads Standard Reel ø 360 mm Large Reel ø 500 mm Ammo Formed 7.5 8.2 10.5 13.5 13.5 13.5 2,000 2,000 1,600 1,000 1,000 800 700 600 600 1,400 10.2 3.9 4.1 5.1 800 780 630 5.5 6.5 7.5 8.5 5.2 5.5 6 7.3 7.8 8.5 12.5 12.5 14.5 16 10.5 11 12.5 13 13.5 14.3 18 18 18 18 18.
PAGE 11
Film Capacitors – AC Line EMI Suppression and RC Networks PME271M, Metallized Impregnated Paper, Class X2, 275 VAC Lead Taping & Packaging (IEC 60286–2) Lead Spacing 20.3 – 22.5 mm Lead Spacing 10.2 – 15.2 mm ∆p ∆p ∆h ∆p ∆h ∆p ∆h ∆h W H1 W2 F H0 H1 F H0 W0 W1 W2 W0 W1 W P1 D0 P0 P0 P1 D0 W D0 t t Formed Leads from 10.2 to 7.5 mm ∆p ∆p ∆h W2 H1 W0 ∆h W1 F = 7.5 H0 W P0 P1 D0 Taping Specification Dimensions in mm +6/−0.1 F Carrier tape width ±0.5 W Formed 7.
PAGE 12
Film Capacitors – AC Line EMI Suppression and RC Networks PME271M, Metallized Impregnated Paper, Class X2, 275 VAC Lead Taping & Packaging (IEC 60286–2) cont'd Ammo Specifications Dimensions (mm) Series R4x, R4x+R, R7x, RSB F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx H W T 360 340 59 330 330 50 H T Reel Specifications W Dimensions (mm) Series R4x, R4x+R, R7x, RSB F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx D H W 355 500 30 25 55 (Max) 360 500 30 46 (Max) D Manufacturing D
PAGE 13
Film Capacitors – AC Line EMI Suppression and RC Networks PME271M, Metallized Impregnated Paper, Class X2, 275 VAC KEMET Electronics Corporation Sales Oﬃces For a complete list of our global sales oﬃces, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.