Datasheet

ManualsBrandsKEMET ManualsCapacitorsY Capacitor, 2.2nF, 250VAC, 20%

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3016_PME271Y_Y2_250 • 3/12/2019

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

One world. One KEMET

Benets

• Approvals: ENEC, UL, cUL, CQC

• Rated voltage: 250 VAC 50/60 Hz

• Capacitance range: 0.001 – 0.1 µF

• Lead spacing: 10.2 – 25.4 mm

• Capacitance tolerance: ±20%

• Climatic category: 40/100/56/B, IEC 60068–1

• Tape & Reel packaging in accordance with IEC 60286–2

• RoHS compliance and lead-free terminations

• Operatingtemperaturerangeof−40°Cto+100°C

• 100% screening factory test at 3,000 VDC

• Highest possible safety regarding active and

passiveammability

Overview

Multilayer, metallized paper, encapsulated and impregnated

in self-extinguishing material that meets the requirements of

UL 94 V–0.

Applications

For worldwide use as an electromagnetic interference

suppressor in all Y2 applications, line-to-earth.

AC Line EMI Suppression and RC Networks

PME271Y, Metallized Impregnated Paper,

Class Y2, 250 VAC

Legacy Part Number System

PME271 Y 410 M R30

Series Rated Voltage (VAC) Capacitance Code (pF)

Capacitance

Tolerance

Packaging

Y2, Metallized Paper Y = 250 The last two digits

representsignicant

gures.Therstdigit

speciesthetotalnumber

of digits.

M = ±20% See Ordering

Options Table

New KEMET Part Number System

P 271 H E 102 M 250 A

Capacitor Class Series

Lead Spacing

(mm)

Size Code

Capacitance

Code (pF)

Capacitance

Tolerance

Rated Voltage

(VAC)

Lead and

Packaging Code

P = Paper Y2, Metallized

Paper

H = 10.2

Q = 15.2

C = 20.3

E = 25.4

See Dimension

Table

First two digits

represent

signicant

gures.Third

digitspecies

number of

zeros.

M = ±20% 250 = 250 See Ordering

Options Table

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (11 pages)

PAGE 1
AC Line EMI Suppression and RC Networks PME271Y, Metallized Impregnated Paper, Class Y2, 250 VAC Overview Applications Multilayer, metallized paper, encapsulated and impregnated in self-extinguishing material that meets the requirements of UL 94 V–0. For worldwide use as an electromagnetic interference suppressor in all Y2 applications, line-to-earth. Benefits • • • • • • • • • • • Approvals: ENEC, UL, cUL, CQC Rated voltage: 250 VAC 50/60 Hz Capacitance range: 0.001 – 0.1 µF Lead spacing: 10.2 – 25.
PAGE 2
Film Capacitors – AC Line EMI Suppression and RC Networks PME271Y, Metallized Impregnated Paper, Class Y2, 250 VAC Benefits cont'd • Excellent self-healing properties ensure long life, even • Impregnated paper that ensures excellent stability and when subjected to frequent overvoltages reliability, particularly in applications with continuous • Good resistance to ionization due to impregnated dielectric operation • High dv/dt capability Ordering Options Table Lead Spacing Nominal (mm) Lead Length (mm) K
PAGE 3
Film Capacitors – AC Line EMI Suppression and RC Networks PME271Y, Metallized Impregnated Paper, Class Y2, 250 VAC Dimensions – Millimeters FRONT VIEW SIDE VIEW L B H d LL p p B H L d Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 10.2 10.2 10.2 15.2 15.2 15.2 20.3 20.3 20.3 25.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 3.9 4.1 5.1 5.2 5.5 7.3 7.6 9.0 11.3 12.
PAGE 4
Film Capacitors – AC Line EMI Suppression and RC Networks PME271Y, Metallized Impregnated Paper, Class Y2, 250 VAC Performance Characteristics Rated Voltage Capacitance Range Capacitance Tolerance Temperature Range Climatic Category Approvals Dissipation Factor Test Voltage Between Terminals Insulation Resistance In DC Applications 250 VAC 50/60 Hz 0.001 – 0.1 µF ±20% −40°C to +100°C 40/100/56/B ENEC, UL, CSA, CQC Maximum Values at +23°C 1 kHz 1.
PAGE 5
Film Capacitors – AC Line EMI Suppression and RC Networks PME271Y, Metallized Impregnated Paper, Class Y2, 250 VAC Approvals Mark Specification File Number EN/IEC 60384–14 SE/0140–27D UL 60384–14 CAN/CSA–E60384–14–09 E73869 CQC 14001107140 Environmental Compliance All KEMET EMI capacitors are RoHS compliant. Table 1 – Ratings & Part Number Reference Capacitance Value (µF) Maximum Dimensions in mm Lead Spacing (p) fo (MHz) dV/dt (V/µs) New KEMET Part Number Legacy Part Number B H L 0.
PAGE 6
Film Capacitors – AC Line EMI Suppression and RC Networks PME271Y, Metallized Impregnated Paper, Class Y2, 250 VAC Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAuCu (SAC) alloys or SnCu alloys as a primary solder. This has increased the liquidus temperature from 183°C for SnPb eutectic alloy to 217 – 221°C for the new alloys.
PAGE 7
Film Capacitors – AC Line EMI Suppression and RC Networks PME271Y, Metallized Impregnated Paper, Class Y2, 250 VAC Soldering Process cont'd Wave Soldering Recommendations cont'd 1. The table indicates the maximum setup temperature for the soldering process.
PAGE 8
Film Capacitors – AC Line EMI Suppression and RC Networks PME271Y, Metallized Impregnated Paper, Class Y2, 250 VAC Construction Detailed Cross Section Metallized Impregnated Paper (First Layer) Self-Extinguishing Resin Self-Extinguishing Resin Metallized Impregnated Paper (Second Layer) Margin Margin Metal Contact Layer Margin Leads Metal Contact Layer Winding Scheme Metal Spraying Material Metallization Impregnated Paper Single Design — Multilayer Impregnated Paper Dielectric 1 Section © KEMET E
PAGE 9
Film Capacitors – AC Line EMI Suppression and RC Networks PME271Y, Metallized Impregnated Paper, Class Y2, 250 VAC Marking FRONT BACK Series IEC Climatic Category Voltage Self Healing Approval Mark Approval Mark Manufacturing Date Code TOP Capacitance Safety Class Packaging Quantities Lead Spacing (mm) Thickness (mm) Height (mm) Length (mm) Bulk Short Leads Bulk Long Leads Standard Reel 360 mm Large Reel 500 mm Ammo Formed 3.9 4.1 5.1 7.5 8.2 10.5 13.5 13.5 13.
PAGE 10
Film Capacitors – AC Line EMI Suppression and RC Networks PME271Y, Metallized Impregnated Paper, Class Y2, 250 VAC Lead Taping & Packaging (IEC 60286–2) Lead Spacing 20.3 – 22.5 mm Lead Spacing 10.2 – 15.2 mm ∆p ∆p ∆h ∆p ∆h ∆p ∆h ∆h W H1 W2 F H0 H1 F H0 W0 W1 W2 W0 W1 W P1 D0 P0 P0 P1 D0 W D0 t t Formed Leads from 10.2 – 7.5 mm ∆p ∆p ∆h W2 H1 W0 ∆h W1 F = 7.5 H0 W P0 P1 D0 Taping Specification Dimensions in mm Lead Spacing Standard IEC 60286–2 +6/−0.
PAGE 11
Film Capacitors – AC Line EMI Suppression and RC Networks PME271Y, Metallized Impregnated Paper, Class Y2, 250 VAC KEMET Electronics Corporation Sales Oﬃces For a complete list of our global sales oﬃces, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.