Datasheet
4© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3016_PME271Y_Y2_250 • 3/12/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – AC Line EMI Suppression and RC Networks
PME271Y, Metallized Impregnated Paper, Class Y2, 250 VAC
Performance Characteristics
Rated Voltage 250 VAC 50/60 Hz
Capacitance Range 0.001 – 0.1 µF
Capacitance Tolerance ±20%
Temperature Range −40°Cto+100°C
Climatic Category 40/100/56/B
Approvals ENEC, UL, CSA, CQC
Dissipation Factor
MaximumValuesat+23°C
1 kHz 1.3%
Test Voltage Between Terminals
The 100% screening factory test is carried out at
3,000 VDC. The voltage level is selected to meet the
requirements in applicable equipment standards. All
electrical characteristics are checked after the test.
This test may not be repeated due to potential capacitor
damage. KEMET is not liable for any failures that result from
repeating the test.
Insulation Resistance
Minimum Value Between Terminals
12,000MΩ
In DC Applications Recommendedvoltage≤1,000VDC
Environmental Test Data
Test IEC Publication Procedure
Vibration IEC 60068–2–6 Test Fc 3 directions at 2 hours each 10 – 500 Hz at 0.75 mm or 98 m/s
2
Bump IEC 60068–2–29 Test Eb 4,000 bumps at 390 m/s
2
Solderability IEC 60068–2–20 Test Ta Solder globule method
Activeammability IEC 60384–14
Passiveammability IEC 60384–14 Needle-ametest
Humidity IEC 60068–2–3 Test Ca +40°Cand90–95%R.H.