Datasheet

5© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3017_PME271YA_Y2_300 • 3/12/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – AC Line EMI Suppression and RC Networks
PME271YA–E, Metallized Impregnated Paper, Class Y2, 300 VAC
Performance Characteristics
Rated Voltage 300 VAC 50/60 Hz
Capacitance Range 0.001 – 0.15 µF
Capacitance Tolerance ±20%forC≤0.1µF,±10%forC>0.1µF
Temperature Range −40°Cto+115°C
Climatic Category 40/115/56/B
Approvals ENEC, UL, CSA, CQC
Dissipation Factor
Maximumvaluesat+23°C
1 kHz 1.3%
Test Voltage Between Terminals
The 100% screening factory test is carried out at 3,000 VDC. The
voltagelevelisselectedtomeettherequirementsinapplicable
equipment standards. All electrical characteristics are checked
afterthetest.Thistestmaynotberepeatedduetopotential
capacitordamage.KEMETisnotliableforanyfailuresthat
result from repeating the test.
Insulation Resistance
Between Terminals
12,000MΩ
In DC Applications Recommendedvoltage≤1,000VDC
Environmental Test Data
Test IEC Publication Procedure
Vibration IEC 60068–2–6 Test Fc 3 directions at 2 hours each 10 – 500 Hz at 0.75 mm or 98 m/s
2
Bump IEC60068–2–29TestEb 4,000bumpsat390m/s
2
Solderability IEC 60068–2–20 Test Ta Solderglobulemethod
Activeammability IEC 60384–14
Passiveammability IEC 60384–14 Needle-ametest
Humidity IEC 60068–2–3 Test Ca +40°Cand90–95%R.H.