Datasheet

ManualsBrandsKEMET ManualsCapacitorsRadial Film Capacitor, 100nF, 20%, 125VAC

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3024_PMR205 • 4/29/2019

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

One world. One KEMET

Benets

• Rated voltage: 250 VDC, 125 VAC 50/60 Hz

• Capacitance range: 0.1 – 1.0 µF

• Capacitance tolerance: ±20%

• Resistancerange:22–680Ω

• Resistance tolerance: ±30%

• Lead Spacing: 15.2 – 25.4 mm

• Climatic category: 40/085/56/B, IEC 60068–1

• Tape & Reel packaging in accordance with IEC 60286–2

• RoHS compliance and lead-free terminations

• Operatingtemperaturerangeof−40°Cto+85°C

Overview

Multilayer metallized paper encapsulated and impregnated

in self-extinguishing material that meets the requirements

of UL 94 V–0.

Applications

For worldwide use in contact protection, contact

interference suppression, and transient suppression.

AC Line EMI Suppression and RC Networks

PMR205, Metallized Impregnated Paper,

125 VAC/250 VDC

Legacy Part Number System

PMR205 A B 6100 M 033 R30

Series Rated Voltage (VAC) Lead Spacing (mm)

Capacitance

Code (pF)

Capacitance

Tolerance

Resistance(Ω) Packaging

RC Snubber,

Metallized Paper

A = 125 B = 15.2

C = 20.3

E = 25.4

The last three

digits represent

signicantgures.

Therstdigit

speciesthetotal

number of digits.

M = ±20% Resistance Value

inΩ

See Ordering

Options Table

New KEMET Part Number System

P 405 Q E 104 M 125 A H330

Capacitor

Class

Series

Lead Spacing

(mm)

Size Code Capacitance Code (pF)

Capacitance

Tolerance

Rated Voltage

(VAC)

Packaging Resistance(Ω)

P =

Metallized

Paper

RC Snubber Q = 15.2

C = 20.3

E = 25.4

See

Dimension

Table

First two digits

representsignicant

gures.Thirddigit

speciesnumberof

zeros.

M = ±20% 125 = 125 See Ordering

Options Table

Hplusrsttwo

digits represent

signicant

gures.Thirddigit

speciesnumber

of zeros.

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (12 pages)

PAGE 1
AC Line EMI Suppression and RC Networks PMR205, Metallized Impregnated Paper, 125 VAC/250 VDC Overview Applications Multilayer metallized paper encapsulated and impregnated in self-extinguishing material that meets the requirements of UL 94 V–0. For worldwide use in contact protection, contact interference suppression, and transient suppression. Benefits • • • • • • • • • • Rated voltage: 250 VDC, 125 VAC 50/60 Hz Capacitance range: 0.1 – 1.
PAGE 2
Film Capacitors – AC Line EMI Suppression and RC Networks PMR205, Metallized Impregnated Paper, 125 VAC/250 VDC Benefits cont'd • Excellent self-healing properties that ensure long life, even • High dv/dt capability when subjected to frequent over-voltages • Impregnated paper that ensures excellent stability and • Good resistance to ionization due to impregnated paper reliability properties, particularly in applications with dielectric continuous operation Ordering Options Table Lead Spacing Nominal (mm)
PAGE 3
Film Capacitors – AC Line EMI Suppression and RC Networks PMR205, Metallized Impregnated Paper, 125 VAC/250 VDC Dimensions – Millimeters FRONT VIEW SIDE VIEW L B H d LL p Size Code p B H L d Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance QE 15.2 ±0.4 5.2 Maximum 10.5 Maximum 18.5 Maximum 0.8 ±0.05 QM QP CE CJ CP EE 15.2 15.2 20.3 20.3 20.3 25.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 7.3 7.8 7.6 9.0 11.3 10.
PAGE 4
Film Capacitors – AC Line EMI Suppression and RC Networks PMR205, Metallized Impregnated Paper, 125 VAC/250 VDC Performance Characteristics Rated Voltage Capacitance Range Capacitance Tolerance Resistance Range Resistance Tolerance Temperature Range Climatic Category Peak Pulse Voltage Series Resistance 125 VAC 50/60 Hz 0.1 – 1.
PAGE 5
Film Capacitors – AC Line EMI Suppression and RC Networks PMR205, Metallized Impregnated Paper, 125 VAC/250 VDC Environmental Compliance All KEMET EMI capacitors are RoHS compliant. Table 1 – Ratings & Part Number Reference Lead Spacing (p) Capacitance Value (µF) Resistance (Ω) 15.2 15.2 15.2 15.2 15.2 15.2 15.2 15.2 15.2 15.2 15.2 15.2 15.2 15.2 15.2 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 25.4 20.3 20.3 20.3 20.3 20.3 0.10 0.10 0.10 0.10 0.15 0.15 0.22 0.22 0.22 0.22 0.22 0.25 0.25 0.25 0.
PAGE 6
Film Capacitors – AC Line EMI Suppression and RC Networks PMR205, Metallized Impregnated Paper, 125 VAC/250 VDC Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAuCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 – 221ºC for the new alloys.
PAGE 7
Film Capacitors – AC Line EMI Suppression and RC Networks PMR205, Metallized Impregnated Paper, 125 VAC/250 VDC Soldering Process cont'd Wave Soldering Recommendations cont'd 1. The table indicates the maximum setup temperature for the soldering process.
PAGE 8
Single-sided Metallized Polypropylene Film Double-sided H Film Capacitors – AC Line EMI Suppression and RC Networks PMR205, Metallized Impregnated Paper, 125 VAC/250 VDC Single-sided Metallized d Polypropylene Construction Film Double-sided Metallized Polyester Carrier Film Single-sided LLMetallized Polypropylene Film p R Resistor (Not Shown) Integrated into2 Metallization Sections 1 Section Self-Extinguishing Resin Detailed Cross Section C Self-Extinguishing 1 Section Resin Series Connection M
PAGE 9
Film Capacitors – AC Line EMI Suppression and RC Networks PMR205, Metallized Impregnated Paper, 125 VAC/250 VDC Marking FRONT BACK RIFA Logo Voltage Series IEC Climatic Category Dielectric Code Circuit Diagram RC Unit Manufacturing Date Code TOP Capacitance Resistance Packaging Quantities Size Code Lead Spacing (mm) Bulk Short Leads Bulk Long Leads Standard Reel 360 mm QE QM QP 15.2 15.2 15.2 Lead and Packaging Code 5.2 10.5 18.5 C/R06 1,000 A/R30 500 L/R19T0 600 7.3 7.8 13.0 13.
PAGE 10
Film Capacitors – AC Line EMI Suppression and RC Networks PMR205, Metallized Impregnated Paper, 125 VAC/250 VDC Lead Taping & Packaging (IEC 60286–2) Lead Spacing 20.3 – 22.5 mm Lead Spacing 10.2 – 15.2 mm ∆p ∆p ∆h ∆p ∆h ∆p ∆h ∆h W H1 W2 F H0 H1 F H0 W0 W1 W2 W0 W1 W P1 D0 P0 P0 P1 D0 W D0 t t Formed Leads from 10.2 – 7.5 mm ∆p ∆p ∆h W2 H1 W0 ∆h W1 F = 7.5 H0 W P0 P1 D0 Taping Specification Standard IEC 60286–2 Dimensions in mm Lead Spacing +6/−0.1 F Formed 7.
PAGE 11
Film Capacitors – AC Line EMI Suppression and RC Networks PMR205, Metallized Impregnated Paper, 125 VAC/250 VDC Lead Taping & Packaging (IEC 60286–2) cont'd Ammo Specifications Dimensions (mm) Series R4x, R4x+R, R7x, RSB F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx H W T 360 340 59 330 330 50 H T W Reel Specifications Dimensions (mm) Series R4x, R4x+R, R7x, RSB F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx D H W 355 500 30 25 55 (Max) 360 500 30 46 (Max) D H W Manufacturing
PAGE 12
Film Capacitors – AC Line EMI Suppression and RC Networks PMR205, Metallized Impregnated Paper, 125 VAC/250 VDC KEMET Electronics Corporation Sales Oﬃces For a complete list of our global sales oﬃces, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.