Datasheet

ManualsBrandsKEMET ManualsCapacitorsXY combination 2x 2.2nF, 100nF, 275VAC, 20%

One world. One KEMET

Benets

• Approvals: ENEC, UL, cUL

• Rated Voltage: 275 VAC 50/60 Hz

• Capacitance X Value: 0.1 µF, and 0.15 µF

• Capacitance Y Value: 0.0022 µF, 0.0033 µF, and 0.0044 µF

• Lead Spacing: 20 mm

• Capacitance Tolerance: ±20%

Overview

Multilayer, metallized paper encapsulated and impregnated

in self-extinguishing material that meets the requirements of

UL 94 V–0.

Applications

Typical applications include interference suppressors with

X2 + 2x Y2 capacitors in a delta conguration.

AC Line EMI Suppression and RC Networks

PZB300, Delta Conguration X2 + 2x Y2, 275 VAC

Customer Part Number System

PZB300 M C 11 R30

Series Rated Voltage (VAC) Lead Spacing (mm) Capacitance Code (pF) Packaging

Delta EMI,

X2 + 2xY2,

Metallized Paper

M = 275 C = 20.0 The rst digit indicates the

value of the X capacitor:

1 = 0.10 µF

2 = 0.15 µF

The second digit indicates

the value of the Y capacitor:

1 = 0.0022 µF

2 = 0.0033 µF

3 = 0.0047 µF

See Ordering

Options Table

KEMET Internal Part Number System

P 300 P L 104 M 275 A C222

Capacitor

Class

Series

Lead Spacing

(mm)

Size

Code

X Capacitance Code (pF)

Capacitance

Tolerance

Rated Voltage

(VAC)

Packaging

Y Capacitance

Code

P = Paper Delta EMI,

X2 + 2x Y2,

Metallized

Paper

P = 20 See

Dimension

Table

The rst two digits

indicate the two most

signicant digits of the

capacitance value in

picofarads. The third

digit is the number of

following zeros.

M = ±20% 275 = 275 See Ordering

Options

Table

C plus the

rst two digits

represent

signicant

gures. The

third digit

species

number of

zeros.

Summary of content (8 pages)

PAGE 1
AC Line EMI Suppression and RC Networks PZB300, Delta Configuration X2 + 2x Y2, 275 VAC Overview Applications Multilayer, metallized paper encapsulated and impregnated in self-extinguishing material that meets the requirements of UL 94 V–0. Typical applications include interference suppressors with X2 + 2x Y2 capacitors in a delta configuration. Benefits • • • • • • Approvals: ENEC, UL, cUL Rated Voltage: 275 VAC 50/60 Hz Capacitance X Value: 0.1 µF, and 0.15 µF Capacitance Y Value: 0.0022 µF, 0.
PAGE 2
Film Capacitors – AC Line EMI Suppression and RC Networks PZB300, Delta Configuration X2 + 2x Y2, 275 VAC Benefits cont'd • • • • • • Climatic Category: 40/100/56/B, IEC 60068–1 Tape & Reel packaging in accordance with IEC 60286–2 RoHS compliance and lead-free terminations Operating temperature range of −40°C to +100°C 100% screening factory test at 2,150 VDC/1,500 VAC Excellent self-healing properties ensure long life, even when subjected to frequent overvoltages • Good resistance to ionization due to i
PAGE 3
Film Capacitors – AC Line EMI Suppression and RC Networks PZB300, Delta Configuration X2 + 2x Y2, 275 VAC Performance Characteristics Rated Voltage Capacitance Range Capacitance Tolerance Temperature Range Climatic Category Approvals Dissipation Factor Test Voltage Between Terminals 275 VAC 50/60 Hz 0.1 µF – 0.15 µF ±20% −40°C to +100°C 40/100/56/B ENEC, UL, CSA Maximum Values at +23°C 1 kHz 1.
PAGE 4
Film Capacitors – AC Line EMI Suppression and RC Networks PZB300, Delta Configuration X2 + 2x Y2, 275 VAC Approvals Mark Specification File Number EN/IEC 60384–14 SE/0140–24E UL 60384–14 CAN/CSA–E60384–14–09 E73869 Environmental Compliance All KEMET EMI capacitors are RoHS compliant. Table 1 – Ratings & Part Number Reference Cx (µF) Cy (µF) 0.10 0.
PAGE 5
Film Capacitors – AC Line EMI Suppression and RC Networks PZB300, Delta Configuration X2 + 2x Y2, 275 VAC Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAuCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from 183°C for SnPb eutectic alloys to 217 – 221°C for the new alloys. As a result the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures.
PAGE 6
Film Capacitors – AC Line EMI Suppression and RC Networks PZB300, Delta Configuration X2 + 2x Y2, 275 VAC Soldering Process cont'd Wave Soldering Recommendations cont'd 1. The table indicates the maximum setup temperature of the soldering process.
PAGE 7
Film Capacitors – AC Line EMI Suppression and RC Networks PZB300, Delta Configuration X2 + 2x Y2, 275 VAC Marking FRONT TOP Logo Capacitance Series IEC Climatic Category Date Code Passive Flamability Class Capacitor Class BACK Circuit Diagram Rated Voltage Approvals Manufacturing Date Code (IEC–60062) Y = Year, Z = Month Year 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 Code A B C D E F H J K L M N Year 2022 2023 2024 2025 2026 2027 2028 2029 2030 Code P R S T U V W X A Month
PAGE 8
Film Capacitors – AC Line EMI Suppression and RC Networks PZB300, Delta Configuration X2 + 2x Y2, 275 VAC KEMET Electronics Corporation Sales Oﬃces For a complete list of our global sales oﬃces, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.