Datasheet

ManualsBrandsKEMET ManualsCapacitorsRadial Film Capacitor, 4.7nF, 300VAC, 1kVDC, 20%

One world. One KEMET

Benets

• Approvals: ENEC, UL, cUL, CQC

• Class Y2 / X1 (IEC 60384-14)

• Rated voltage: 300 VAC 50/60 Hz

• Capacitance range: 0.001 – 1 µF

• Lead spacing: 10 – 37.5 mm

• Capacitance tolerance: ±20%, ±10%

• Climatic category: 40/110/56, IEC 60068–1

• Tape and reel in accordance with IEC 60286–2

• RoHS Compliant and lead-free terminations

• Operatingtemperaturerangeof−40˚Cto+110˚C

• 100% screening factory test at 5,000 VDC/2,500 VAC

• Self-healing properties

• Automotive (AEC–Q200) grades available up to

22.5 mm Lead Spacing

Overview

TheR41isconstructedofmetallizedpolypropylenelm

encapsulated with self-extinguishing resin in a box of

material meeting the requirements of UL 94 V–0.

Automotive Grade devices (up to 22.5 mm Lead Spacing)

meet the demanding Automotive Electronics Council's AEC–

Q200qualicationrequirements.

Applications

For use in electromagnetic interference (EMI) suppression

lterin"line-to-ground"and"across-the-line"applications

requiringY2/X1safetyclassication.Suitableforusein

situations where failure of the capacitor could lead to danger

ofelectricshock.Notforusein"serieswithmains"type

applications.

Metallized Polypropylene Film EMI Suppression Capacitors

R41, Class Y2, 300 VAC, 110°C

(Automotive Grade)

Part Number System

R41 3 I 2330 00 M1 M

Series

Rated Voltage

(VAC)

Lead Spacing

(mm)

Capacitance

Code (pF)

Packaging Internal Use

Capacitance

Tolerance

Y2, Metallized

Polypropylene

3 = 300 F = 10.0

I = 15.0

N = 22.5

R = 27.5

W = 37.5

The last three

digits represent

signicantgures.

Therstdigit

speciesnumber

of zeros to be

added.

See Ordering

Options Table

K = ±10%

M = ±20%

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (16 pages)

PAGE 1
Metallized Polypropylene Film EMI Suppression Capacitors R41, Class Y2, 300 VAC, 110°C (Automotive Grade) Overview Applications The R41 is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material meeting the requirements of UL 94 V–0. For use in electromagnetic interference (EMI) suppression filter in "line-to-ground" and "across-the-line" applications requiring Y2/X1 safety classification.
PAGE 2
Metallized Polypropylene Film EMI Suppression Capacitors R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade) Ordering Options Table Lead Spacing Nominal (mm) Lead Length (mm) Lead and Packaging Code 4 +2/−0 H0= 18.5 ±0.5 00 DQ Tape & Reel (Large Reel) H0= 18.5 ±0.5 CK Bulk (Bag) – Short Leads 3.5 +0.5/−0 JB Bulk (Bag) – Short Leads 4.0 +0.5/−0 JE Bulk (Bag) – Short Leads 3.2 +0.3/−0.
PAGE 3
Metallized Polypropylene Film EMI Suppression Capacitors R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade) Dimensions – Millimeters FRONT VIEW SIDE VIEW L B H d LL p p B H L d Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 37.5 37.5 37.5 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 4.0 5.0 6.0 5.0 6.0 7.5 8.5 11.0 6.
PAGE 4
Metallized Polypropylene Film EMI Suppression Capacitors R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade) Performance Characteristics Polypropylene film Dielectric Plates Metal layer deposited by evaporation under vacuum Winding Non-inductive type Leads Tinned wire Protection Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94.
PAGE 5
Metallized Polypropylene Film EMI Suppression Capacitors R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade) Performance Characteristics cont'd Dissipation Factor (tanδ) Test Voltage Between Terminals ≤ 0.3% (0.2%*) at 1kHz , +25°C ±5°C (* typical value) The 100% screening factory test is carried out at 5,000 VDC/2,500 VAC. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test.
PAGE 6
Metallized Polypropylene Film EMI Suppression Capacitors R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade) Environmental Test Data Test IEC Publication Procedure Endurance EN/IEC 60384–14 Vibration IEC 60068–2–6 Test Fc 3 directions at 2 hours each 10 – 55 Hz at 0.
PAGE 7
Metallized Polypropylene Film EMI Suppression Capacitors R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade) Table 1 – Ratings & Part Number Reference Dimensions in mm Capacitance Value (µF) B H 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.0033 0.0047 0.0068 0.010 0.015 0.022 0.033 0.047 0.068 0.047 0.068 0.068 0.10 0.15 0.22 0.22 0.33 0.47 0.68 0.47 0.68 1.0 4.0 4.0 4.0 4.0 5.0 6.0 6.0 5.0 5.0 5.0 5.0 5.0 6.0 7.5 8.5 11.0 6.0 6.0 7.0 8.5 10.0 13.0 13.0 14.0 18.0 18.0 13.0 16.0 20.0 9.0 9.
PAGE 8
Metallized Polypropylene Film EMI Suppression Capacitors R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade) Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183°C for SnPb eutectic alloy to 217 – 221°C for the new alloys.
PAGE 9
Metallized Polypropylene Film EMI Suppression Capacitors R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade) Soldering Process cont'd Wave Soldering Recommendations cont'd 1.
PAGE 10
Metallized Polypropylene Film EMI Suppression Capacitors R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade) Construction 2 Sections Molded Plastic Case Single-sided Metallized Polypropylene Film (First Layer) Detailed Cross Section Molded Plastic Self-Extinguishing Case Resin Single-sided Metallized Polypropylene Film (Second Layer) Margin Margin Metal Contact Layer Metal Contact Layer FILM WINDINGMargin SCHEME OPTIONS Leads etallized Polypropylene Film Double-sided Metallized Polyester Film
PAGE 11
Metallized Polypropylene Film EMI Suppression Capacitors R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade) Marking Lead Spacing 10 mm FRONT TOP Series, Dielectric Code, Safety Class, Self Healing Capacitance, Rated Voltage Approval Marks Manufacturer’s Logo IEC Climatic Category Capacitance Tolerance Date Code Passive Flammability Category Manufacturing Plant Lead Spacing 15 mm, 22.
PAGE 12
Manufacturing Plant Passive Flammability Category: Metallized Polypropylene Film EMI Suppression Capacitors B for volume ≥ 1750 mm3 R41 Series, Class Y2, 300C VAC, 110ºC <(Automotive for volume 1750 mm3 Grade) Marking cont'd Lead Spacing 22.5 mm (large case sizes), 27.5 mm, 37.
PAGE 13
Metallized Polypropylene Film EMI Suppression Capacitors R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade) Packaging Quantities Lead Spacing (mm) Thickness (mm) Height (mm) Length (mm) Bulk Short Leads Bulk Long Leads Standard Reel ø 355 mm Large Reel ø 500 mm Ammo Taped 10 4.0 5.0 6.0 9.0 11.0 12.0 13.0 13.0 13.0 2000 1300 1000 1800 1500 1200 750 600 500 1500 1250 1000 1000 800 680 15 5.0 6.0 7.5 8.5 11.0 11.0 12.0 13.5 14.5 19.0 18.0 18.0 18.0 18.0 18.
PAGE 14
Metallized Polypropylene Film EMI Suppression Capacitors R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade) Lead Taping & Packaging (IEC 60286–2) Figure 1 Lead Spacing 10 mm Figure 2 Lead Spacing 15 mm Figure 3 Lead Spacing 22.5 – 27.5 mm P W2 P2 ød A B W W0 W1 H0 P1 P0 F P h h D0 P1 P2 A-B t Taping Specification Dimensions (mm) Description Symbol 10 Fig. 1 Lead Space 15 22.5 Fig. 2 Fig. 3 27.5 Fig. 3 Tol. Lead wire diameter d 0.6 0.6-0.8 0.8 0.8 ±0.
PAGE 15
Metallized Polypropylene Film EMI Suppression Capacitors R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade) Lead Taping & Packaging (IEC 60286–2) cont'd Ammo Specifications Dimensions (mm) H W T 360 340 59 H T W Reel Specifications Reel Size Standard Large Dimensions (mm) D H W 355 500 30 25 55 Maximum D H W © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.
PAGE 16
Metallized Polypropylene Film EMI Suppression Capacitors R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade) KEMET Electronics Corporation Sales Oﬃces For a complete list of our global sales oﬃces, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.