Datasheet

ManualsBrandsKEMET ManualsCapacitorsMetallized Polypropylene Film EMI Suppression Radial Capacitor, 15nF, 300VAC, 1.5kVDC, 10%

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3120_R41-T_Y2_300 • 11/18/2019

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

One world. One KEMET

Benets

• Approvals: ENEC, UL, cUL, CQC

• Class Y2/X1 (IEC 60384-14)

• THB Grade IIIB: 85°C, 85% RH, 1,000 hours at 300 V

URAC/1,500 V URDC acc. to IEC 60384-14

• Rated voltage: 300 VAC 50/60 Hz

• Capacitance range: 0.0047 – 0.22 µF

• Lead spacing: 15 – 22.5 mm

• Capacitance tolerance: ±20%, ±10%

• Climatic category 40/110/56, IEC 60068-1

• Tape and reel in accordance with IEC 60286-2

• RoHS compliant and lead-free terminations

• Operatingtemperaturerangeof−40°Cto+125°C

• Self-healing properties

• Automotive (AEC–Q200) grades available

Overview

TheR41isconstructedofmetallizedpolypropylenelm

encapsulated with self-extinguishing resin, in a box of

material meeting the requirements of UL 94 V–0.

Automotive Grade devices meet the demanding Automotive

ElectronicsCouncil'sAEC–Q200qualicationrequirements.

Applications

For use in electromagnetic interference (EMI) suppression

lterin"line-to-ground"and"across-the-line"applications,

requiringY2/X1safetyclassication.Suitableforusein

situations where failure of the capacitor could lead to

dangerofelectricshock.Notforusein"serieswithmains"

type applications.

Metallized Polypropylene Film EMI Suppression Capacitors

R41-T, THB, Class Y2, 300 VAC, 125°C

(Automotive Grade)

Part Number System

R41 3 I 2330 00 T0 M

Series Rated Voltage (VAC)

Lead Spacing

(mm)

Capacitance Code

(pF)

Packaging Internal Use

Capacitance

Tolerance

Y2, Metallized

Polypropylene

3 = 300 I = 15.0

N = 22.5

The last three

digits represent

signicantgures.

Therstdigit

speciesnumber

of zeros to be

added.

See Ordering

Options Table

K = ±10%

M = ±20%

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (14 pages)

PAGE 1
Metallized Polypropylene Film EMI Suppression Capacitors R41-T, THB, Class Y2, 300 VAC, 125°C (Automotive Grade) Overview Applications The R41 is constructed of metallized polypropylene film encapsulated with self-extinguishing resin, in a box of material meeting the requirements of UL 94 V–0. For use in electromagnetic interference (EMI) suppression filter in "line-to-ground" and "across-the-line" applications, requiring Y2/X1 safety classification.
PAGE 2
Metallized Polypropylene Film EMI Suppression Capacitors R41-T, THB, Class Y2, 300 VAC, 125°C (Automotive Grade) Ordering Options Table Lead Spacing Nominal (mm) Type of Leads and Packaging Lead Length (mm) Lead and Packaging Code Standard Lead and Packaging Options Bulk (Bag) – Short Leads Ammo Pack Other Lead and Packaging Options 4 +2/−0 H0= 18.5 ±0.5 00 DQ Tape & Reel (Large Reel) H0= 18.5 ±0.5 CK Tape & Reel (Standard Reel) H0 = 18.5±0.5 GY Bulk (Bag) – Short Leads 3.5 +0.
PAGE 3
Metallized Polypropylene Film EMI Suppression Capacitors R41-T, THB, Class Y2, 300 VAC, 125°C (Automotive Grade) Performance Characteristics Dielectric Plates Winding Leads Protection Related Documents Rated Voltage (VR) Polypropylene film Metal layer deposited by evaporation under vacum Non-inductive type Tinned wire Plastic case, thermosetting resin filled.
PAGE 4
Metallized Polypropylene Film EMI Suppression Capacitors R41-T, THB, Class Y2, 300 VAC, 125°C (Automotive Grade) Performance Characteristics cont. Maximum Humidity in Storage Condition 100 Relative Humidity (%) 90 80 70 60 50 40 30 Days Annual Average 30 20 10 0 −40 −20 0 20 40 Temperature (°C) 60 80 Qualification Automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council.
PAGE 5
Metallized Polypropylene Film EMI Suppression Capacitors R41-T, THB, Class Y2, 300 VAC, 125°C (Automotive Grade) Environmental Test Data Test IEC Publication Procedure Endurance IEC 60384-14 1.7 x VR VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1 second, 1,000 hours at upper rated temperature" Vibration IEC 60068-2-6 Test Fc 3 directions at 2 hours each 10 – 55 Hz at 0.
PAGE 6
Metallized Polypropylene Film EMI Suppression Capacitors R41-T, THB, Class Y2, 300 VAC, 125°C (Automotive Grade) Environmental Compliance All KEMET EMI capacitors are RoHS Compliant. Table 1 – Ratings & Part Number Reference Dimensions in mm Capacitance Value (µF) L Lead Spacing (p) dV/dt (V/µs) New KEMET Part Number Legacy Part Number B H 0.0047 0.0068 0.010 0.015 0.015 0.022 0.022 0.033 0.033 0.047 0.068 0.047 0.068 0.10 0.10 0.15 0.15 0.22 5.0 5.0 5.0 5.0 6.0 6.0 7.5 7.5 8.5 10.0 11.0 6.0 7.
PAGE 7
Metallized Polypropylene Film EMI Suppression Capacitors R41-T, THB, Class Y2, 300 VAC, 125°C (Automotive Grade) Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183°C for SnPb eutectic alloy to 217 – 221°C for the new alloys.
PAGE 8
Metallized Polypropylene Film EMI Suppression Capacitors R41-T, THB, Class Y2, 300 VAC, 125°C (Automotive Grade) Soldering Process cont. Wave Soldering Recommendations cont. 1.
PAGE 9
Metallized Polypropylene Film EMI Suppression Capacitors R41-T, THB, Class Y2, 300 VAC, 125°C (Automotive Grade) Construction 2 Sections Molded Plastic Case Single-sided Metallized Polypropylene Film (First Layer) Detailed Cross Section Molded Plastic Self-Extinguishing Case Resin Single-sided Metallized Polypropylene Film (Second Layer) Margin Margin Metal Contact Layer Metal Contact Layer FILM WINDINGMargin SCHEME OPTIONS Leads etallized Polypropylene Film Double-sided Metallized Polyester Film
PAGE 10
IEC Climatic Category Date Code Metallized Polypropylene Film EMI Suppression Capacitors Passive Flammability R41-T, THB, Class Y2, 300 VAC, 125°C (Automotive Category Grade) Manufacturing Plant NOTE: Hot imprinting with or without color or ink jet or laser marking Marking Lead Spacing 15 mm, 22.
PAGE 11
Metallized Polypropylene Film EMI Suppression Capacitors R41-T, THB, Class Y2, 300 VAC, 125°C (Automotive Grade) Packaging Quantities Lead Spacing (mm) Thickness (mm) Height (mm) Length (mm) Bulk Short Leads Bulk Long Leads Standard Reel ø 355 mm Large Reel ø 500 mm Ammo Taped 15 5.0 6.0 7.5 8.5 11.0 11.0 12.0 13.5 14.5 19.0 18.0 18.0 18.0 18.0 18.0 2000 1750 1000 1000 450 1000 900 700 500 350 600 500 350 300 – 1,250 1,000 800 700 500 800 680 500 440 340 22.5 6.0 7.0 8.5 10.0 13.0 15.
PAGE 12
Metallized Polypropylene Film EMI Suppression Capacitors R41-T, THB, Class Y2, 300 VAC, 125°C (Automotive Grade) Lead Taping & Packaging (IEC 60286–2) Figure 1 Lead Spacing 10 mm Figure 2 Lead Spacing 15 mm Figure 3 Lead Spacing 22.5 – 27.5 mm P W2 P2 ød A B W W0 W1 H0 P1 P0 F P h h D0 P1 P2 A-B t Taping Specification Dimensions (mm) Description Symbol 10 Fig. 1 Lead Space 15 22.5 Fig. 2 Fig. 3 27.5 Fig. 3 Tol. Lead wire diameter d 0.6 0.6–0.8 0.8 0.8 ±0.
PAGE 13
Metallized Polypropylene Film EMI Suppression Capacitors R41-T, THB, Class Y2, 300 VAC, 125°C (Automotive Grade) Lead Taping & Packaging (IEC 60286–2) cont. Ammo Specifications Dimensions (mm) H W T 360 340 59 H T W Reel Specifications Reel Size Standard Large Dimensions (mm) D H W 355 500 30 25 55 Maximum D H W © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.
PAGE 14
Metallized Polypropylene Film EMI Suppression Capacitors R41-T, THB, Class Y2, 300 VAC, 125°C (Automotive Grade) KEMET Electronics Corporation Sales Oﬃces For a complete list of our global sales oﬃces, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.