Datasheet

ManualsBrandsKEMET ManualsCapacitorsX2 Capacitor, 15nF, 275VAC, 560VDC, 20%

One world. One KEMET

Benets

• Approvals: ENEC, UL, cUL

• Class X2 (IEC 60384-14)

• Rated voltage: 275 VAC 50/60 Hz

• Capacitance range: 0.01 – 1 µF

• Lead spacing: 10.0 – 22.5 mm

• Capacitance tolerance: ±20%, ±10%

• Climatic category: 40/125/56, IEC 60068–1

• Tape and reel in accordance with IEC 60286–2

• RoHS Compliant and lead-free terminations

• Operatingtemperaturerangeof-40˚Cto+125˚C

• 100% screening factory test at 2,200 VDC/1,500 VAC

• Self-healing properties

Overview

TheR46Seriesisconstructedofmetallizedpolypropylenelm

encapsulated with self-extinguishing resin in a box of material

meeting the requirements of UL 94 V–0.

Applications

For worldwide use in electromagnetic interference (EMI)

suppression in across-the-line applications requiring X2 safety

classication.Intendedforuseinsituationswherecapacitor

failure would not result in exposure to electric shock. Not for use

in "series with mains" type applications.

Metallized Polypropylene Film EMI Suppression Capacitors

R46 Series, Class X2, 275 VAC, 125ºC

Part Number System

R46 K N 3220 00 H1 M

Series

Rated Voltage

(VAC)

Lead Spacing

(mm)

Capacitance Code (pF) Packaging Internal Use

Capacitance

Tolerance

X2, Metallized

Polypropylene

K = 275

F = 10.0

I = 15.0

N = 22.5

The last three digits

representsignicant

gures.Therstdigit

speciesnumberofzeros

to be added.

See Ordering

Options Table

H = High

Temperature

K = ±10%

M = ±20%

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (16 pages)

PAGE 1
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 125ºC Overview Applications The R46 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material meeting the requirements of UL 94 V–0. For worldwide use in electromagnetic interference (EMI) suppression in across-the-line applications requiring X2 safety classification.
PAGE 2
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 125ºC Ordering Options Table Lead Spacing Nominal (mm) Lead Length (mm) Lead and Packaging Code 4 +2/-0 H0= 18.5 +/-0.5 00 DQ Tape & Reel (Large Reel) H0= 18.5 +/-0.5 CK Bulk (Bag) – Short Leads 2.7 +0.5/-0 JA Bulk (Bag) – Short Leads 3.5 +0.5/-0 JB Bulk (Bag) – Short Leads 4.0 +0.5/-0 JE Bulk (Bag) – Short Leads 3.2 +0.3/-0.
PAGE 3
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 125ºC Dimensions – Millimeters Loose Insulated Rigid Leads Insulated Flexible Leads 0.5 mm2 FRONT VIEW SIDE VIEW FRONT VIEW SIDE VIEW FRONT VIEW SIDE VIEW L B L B L B H H d H LL B H d L 8 ±2 8 ±2 d p 150 ±5 35 +0/-5 p d Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.
PAGE 4
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 125ºC Performance Characteristics Dielectric Plates Winding Leads Protection Polypropylene film Metal layer deposited by evaporation under vacuum Non-inductive type Tinned wire Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94. Related documents IEC 60384-14, EN 60384-14 Rated Voltage (VR) 275 VAC (50/60 Hz), 560 VDC Capacitance Range 0.
PAGE 5
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 125ºC Environmental Test Data Test IEC Publication Procedure Endurance EN/IEC 60384–14 Vibration IEC 60068–2–6 Test Fc 3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s2 Bump IEC 60068–2–29 Test Eb 1,000 bumps at 390 m/s2 Change of Temperature IEC 60068–2–14 Test Na Upper and lower rated temperature 5 cycles Active Flammability IEC 60384–14 VR + 20 surge pulses at 2.
PAGE 6
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 125ºC Table 1 – Ratings & Part Number Reference Capacitance Value (µF) Dimensions in mm B H L Lead Spacing (p) dV/dt (V/µs) New KEMET Part Number Legacy Part Number 0.010 0.015 0.022 0.033 0.047 0.068 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 0.15 0.15 0.22 0.22 0.22 0.22 0.33 0.33 0.33 0.47 0.15 0.22 0.33 0.47 0.68 1.0 5.0 5.0 5.0 5.0 6.0 6.0 5.0 5.0 5.0 5.0 5.0 5.0 6.0 6.0 9.0 7.5 8.5 6.0 9.0 7.5 10.0 7.
PAGE 7
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 125ºC Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 – 221ºC for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures.
PAGE 8
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 125ºC Soldering Process cont'd Wave Soldering Recommendations cont'd 1.
PAGE 9
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 125ºC Construction Single-sided Metallized Polypropylene Film (First Layer) Molded Plastic Case Detailed Cross Section Molded Plastic Case Self-Extinguishing Resin Single-sided Metallized Polypropylene Film (Second Layer) Margin Margin Metal Contact Layer Metal Contact Layer Margin FILM WINDING SCHEME OPTIONS Leads Single-sided Metallized Polypropylene Film Double-side Winding Scheme Single-sided Metallized Po
PAGE 10
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 125ºC Marking Lead Spacing 10 mm FRONT TOP Capacitance Tolerance Series, Dielectric Code, Safety Class, Self Healing Approval Marks Manufacturer’s Logo Capacitance, Rated Voltage IEC Climatic Category Date Code Passive Flammability Category Manufacturing Plant Lead Spacing 15 mm, 22.
PAGE 11
IEC Climatic Category Date Code Manufacturing Plant Metallized Polypropylene Film EMI Suppression Capacitors Passive Flammability Category: B for volume ≥ 1750 mm3 R46 Series, Class X2, 275 VAC, 125ºC C for volume < 1750 mm3 Marking cont'd Lead Spacing 22.5 mm (large case sizes), 27.5 mm, 37.
PAGE 12
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 125ºC Packaging Quantities Lead Spacing Thickness (mm) (mm) Height (mm) Length (mm) Bulk Short Leads Bulk Long Leads Standard Reel ø 355 mm Large Reel ø 500 mm Ammo Taped 10 5 6 11 12 13 13 1300 1000 1500 1200 600 500 1250 1000 800 680 15 5 6 6 7.5 7.5 8.5 11 12 17.5 13.5 18.5 14.
PAGE 13
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 125ºC Lead Taping & Packaging (IEC 60286–2) Figure 1 Lead Spacing 10 mm Figure 2 Lead Spacing 15 mm Figure 3 Lead Spacing 22.5 – 27.5 mm P W2 P2 P h h W W0 W1 H0 ød P1 P0 F D0 t P1 P2 Taping Specification Dimensions (mm) Description Symbol 10 Fig. 1 Lead Space 15 22.5 Fig. 2 Fig. 3 27.5 Fig. 3 Tol. Lead wire diameter d 0.6 0.6-0.8 0.8 0.8 ±0.05 Taping lead space P 25.4 25.4 38.1 38.
PAGE 14
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 125ºC Lead Taping & Packaging (IEC 60286–2) cont'd Ammo Specifications Dimensions (mm) H W T 360 340 59 H T W Reel Specifications Reel Size Standard Large Dimensions (mm) D H W 355 500 30 25 55 Maximum D H W © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.
PAGE 15
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 125ºC KEMET Corporation World Headquarters Europe Asia Southern Europe Sasso Marconi, Italy Tel: 39-051-939111 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Skopje, Macedonia Tel: 389-2-55-14-623 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.
PAGE 16
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 125ºC Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.