Datasheet

ManualsBrandsKEMET ManualsCapacitorsRadial Film Capacitor, 470nF, 275VAC, 560VDC, 20%

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3093_R46_X2_275_110C • 2/5/2019

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

One world. One KEMET

Benets

• Approvals: ENEC, UL, cUL, CQC

• X2 CLASS (IEC 60384-14)

• Rated voltage: 275 VAC 50/60 Hz

• Capacitance range: 0.01 – 10 µF

• Lead spacing: 10.0 – 37.5 mm

• Capacitance tolerance: ±20%, ±10%

• Climatic category 40/110/56, IEC 60068-1

• Tape & Reel in accordance with IEC 60286-2

• RoHS compliant and lead-free terminations

• Operatingtemperaturerangeof−40°Cto+110°C

• 100% screening factory test at 2,200 VDC/1,500 VAC

• Self healing properties

Overview

The R46 Series is constructed of metallized polypropylene

lmencapsulatedwithself-extinguishingresininaboxof

material that meets the requirements of UL 94 V–0.

Applications

For worldwide use in electromagnetic interference (EMI)

suppression in across-the-line applications that require X2

safetyclassication.Intendedforuseinsituationsinwhich

capacitorfailurewouldnotresultinexposuretoelectric

shock. Not for use in "series with mains" type applications.

Metallized Polypropylene Film EMI Suppression Capacitors

R46 Series, Class X2, 275 VAC, 110°C

Part Number System

R46 K I 2100 00 01 M

Series

Rated Voltage

(VAC)

Lead Spacing

(mm)

Capacitance

Code (pF)

Packaging Internal Use

Capacitance

Tolerance

X2, Metallized

Polypropylene

K = 275 F = 10.0

I = 15.0

N = 22.5

R = 27.5

W = 37.5

The last three

digits represent

signicantgures.

Therstdigit

speciesnumber

ofzerostobe

added.

See Ordering

OptionsTable

K = ±10%

M = ±20%

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (17 pages)

PAGE 1
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110°C Overview Applications The R46 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material that meets the requirements of UL 94 V–0. For worldwide use in electromagnetic interference (EMI) suppression in across-the-line applications that require X2 safety classification.
PAGE 2
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110°C Ordering Options Table Lead Spacing Nominal (mm) Lead Length (mm) Lead and Packaging Code 4 +2/-0 H0 = 18.5 ±0.5 00 DQ Tape & Reel (Large Reel) H0 = 18.5 ±0.5 CK Bulk (Bag) – Short Leads 2.7 +0.5/−0 JA Bulk (Bag) – Short Leads 3.5 +0.5/−0 JB Bulk (Bag) – Short Leads 4.0 +0.5/−0 JE Bulk (Bag) – Short Leads 3.2 +0.3/−0.
PAGE 3
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110°C Dimensions – Millimeters Loose Insulated Rigid Leads Insulated Flexible Leads 0.5 mm2 FRONT VIEW SIDE VIEW FRONT VIEW SIDE VIEW FRONT VIEW SIDE VIEW L B L B L B H H Ød H LL B H 8 ±2 8 ±2 Ød p 150 ±5 35 +0/−5 p ±0.4 L d Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.
PAGE 4
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110°C Dimensions – Millimeters cont'd Loose Insulated Rigid Leads Insulated Flexible Leads 0.5 mm2 FRONT VIEW SIDE VIEW FRONT VIEW SIDE VIEW FRONT VIEW SIDE VIEW L B L B L B H H Ød H LL B H 8 ±2 8 ±2 Ød p 150 ±5 35 +0/−5 p ±0.4 L d Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 37.5 37.5 37.5 37.5 37.5 37.5 37.5 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.
PAGE 5
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110°C Performance Characteristics Dielectric Polypropylene film Plates Metal layer deposited by evaporation under vacuum Winding Non-inductive type Leads Tinned wire Protection Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94. Related Documents IEC 60384–14, EN 60384–14 Rated Voltage VR 275 VAC (50/60 Hz), 560 VDC Capacitance Range 0.
PAGE 6
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110°C Performance Characteristics cont'd Dissipation Factor (tanδ) Test Voltage Between Terminals ≤ 0.1% (0.06%*) at 1 kHz, +25°C ±5°C (* typical value) The 100% screening factory test is carried out at 2,200 VDC/1,500 VAC. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test.
PAGE 7
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110°C Environmental Test Data Test IEC Publication Procedure Endurance EN/IEC 60384–14 Vibration IEC 60068–2–6 Test Fc 3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s2 Bump IEC 60068–2–29 Test Eb 1,000 bumps at 390 m/s2 Change of Temperature IEC 60068–2–14 Test Na Upper and lower rated temperature 5 cycles Active Flammability IEC 60384–14 VR + 20 surge pulses at 2.
PAGE 8
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110°C Table 1 – Ratings & Part Number Reference Dimensions in mm Capacitance Value (µF) B H 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 0.15 0.22 0.22 0.22 0.33 0.33 0.33 0.33 0.33 0.47 0.47 0.47 0.56 0.60 0.15 0.22 0.33 0.47 0.68 1.00 1.00 0.47 0.68 1.0 1.5 2.2 2.2 3.3 4.7 4.7 1.5 2.2 2.2 3.3 4.7 4.7 6.8 6.8 10.0 4.0 4.0 4.0 5.0 5.0 6.0 6.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 6.
PAGE 9
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110°C Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAuCu (SAC) alloys or SnCu alloys as primary solder material. This has increased the liquidus temperature from 183°C for SnPb eutectic alloys to 217 – 221°C for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher preheat and wave temperatures.
PAGE 10
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110°C Soldering Process cont'd Wave Soldering Recommendations cont'd 1. The table indicates the maximum set-up temperature of the soldering process.
PAGE 11
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110°C Construction Molded Plastic Case Single-sided Metallized Polypropylene Film (First Layer) Detailed Cross Section Molded Plastic Self-Extinguishing Case Resin Single-sided Metallized Polypropylene Film (Second Layer) Margin Margin Metal Contact Layer Metal Contact Layer Margin FILM WINDING SCHEME OPTIONS Leads Single-sided Metallized Polypropylene Film Double-sided Winding Scheme Single-sided Metallized Po
PAGE 12
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110°C Marking Lead Spacing 10 mm FRONT TOP Series, Dielectric Code, Safety Class, Self Healing Capacitance, Rated Voltage Approval Marks Manufacturer’s Logo IEC Climatic Category Capacitance Tolerance Date Code Passive Flammability Category Manufacturing Plant Lead Spacing 15 mm, 22.
PAGE 13
Manufacturing Plant Passive Flammability Category:Capacitors Metallized Polypropylene Film EMI Suppression B for volume ≥ 1750 mm3 R46 Series, Class X2, 275 VAC, C110°C for volume < 1750 mm3 Marking cont'd Lead Spacing 22.5 mm (large case sizes), 27.5 mm, 37.
PAGE 14
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110°C Packaging Quantities Lead Spacing (mm) Thickness (mm) Height (mm) Length (mm) Bulk Short Leads Bulk Long Leads Standard Reel ø 355 mm Large Reel ø 500 mm Ammo Taped 10 4 5 6 9 11 12 13 13 13 2,000 1,300 1,000 1,800 1,500 1,200 750 600 500 1,500 1,250 1,000 1,000 800 680 15 5 6 6 7.5 7.5 8.5 9 10 11 13 11 12 17.5 13.5 18.5 14.5 12.
PAGE 15
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110°C Lead Taping & Packaging (IEC 60286–2) Figure 1 Lead Spacing 10 mm Figure 2 Lead Spacing 15 mm Figure 3 Lead Spacing 22.5 – 27.5 mm P W2 P2 ød A B W W0 W1 H0 P1 P0 F P h h D0 P1 P2 A-B t Taping Specification Dimensions (mm) Description Symbol 10 Fig. 1 Lead Space 15 22.5 Fig. 2 Fig. 3 27.5 Fig. 3 Tol. Lead wire diameter d 0.6 0.6–0.8 0.8 0.8 ±0.05 Taping lead space P 25.4 25.
PAGE 16
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110°C Lead Taping & Packaging (IEC 60286–2) cont'd Ammo Specifications Dimensions (mm) H W T 360 340 59 H T W Reel Specifications Reel Size Standard Large Dimensions (mm) D H W 355 500 30 25 55 Maximum D H W © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.
PAGE 17
Metallized Polypropylene Film EMI Suppression Capacitors R46 Series, Class X2, 275 VAC, 110°C KEMET Electronics Corporation Sales Oﬃces For a complete list of our global sales oﬃces, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.