Datasheet

ManualsBrandsKEMET ManualsCapacitorsX1 Capacitor, 10nF, 440VAC, 1kVDC, 10%

One world. One KEMET

Benets

• Approvals: ENEC, UL, cUL

• Class X1 (IEC 60384-14)

• Rated voltage: 440 VAC 50/60 Hz

• Capacitance range: 0.0047 – 2.2 µF

• Lead spacing: 10.0 – 37.5 mm

• Capacitance tolerance: ±20%, ±10%

• Climatic category: 40/110/56, IEC 60068–1

• Tape and reel in accordance with IEC 60286–2

• RoHS Compliant and lead-free terminations

• Operatingtemperaturerangeof-40˚Cto+110˚C

• 100% screening factory test at 2,700 VDC/1,700 VAC

• Self-healing properties

• Automotive (AEC–Q200) grades available up to

22.5 mm Lead Spacing

Overview

TheR47Seriesisconstructedofmetallizedpolypropylenelm

encapsulated with self-extinguishing resin in a box of material

meeting the requirements of UL 94 V–0.

Automotive Grade devices are available (up to 22.5 mm Lead

Spacing) and meet the demanding Automotive Electronics

Council'sAEC–Q200qualicationrequirements.

Applications

Foruseasaelectromagneticinterference(EMI)suppressionlter

inacross-the-lineapplicationsrequiringX1safetyclassication.

Intended for use in situations where exposure to a shock in the

eventofcapacitorfailureisnotpossible.X1classiedcapacitors

are for use only in a permanently connected apparatus with a

connection to mains which cannot be loosened without the use of

a tool.

Metallized Polypropylene Film EMI Suppression Capacitors

R47 Series, Class X1, 440 VAC, 110ºC

(Automotive Grade)

Part Number System

R47 4 I 2100 00 A1 M

Series

Rated Voltage

(VAC)

Lead Spacing

(mm)

Capacitance Code (pF)

Lead and

Packaging Code

Internal Use

Capacitance

Tolerance

X1, Metallized

Polypropylene

4 = 440

F = 10.0

I = 15.0

N = 22.5

R = 27.5

W = 37.5

Digits 2 – 4 indicate the

rstthreedigitsofthe

capacitance value.

First digit indicates the

number of zeros to be

added.

See Ordering

Options Table

K = ±10%

M = ±20%

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (16 pages)

PAGE 1
Metallized Polypropylene Film EMI Suppression Capacitors R47 Series, Class X1, 440 VAC, 110ºC (Automotive Grade) Overview Applications The R47 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material meeting the requirements of UL 94 V–0. For use as a electromagnetic interference (EMI) suppression filter in across-the-line applications requiring X1 safety classification.
PAGE 2
Metallized Polypropylene Film EMI Suppression Capacitors R47 Series, Class X1, 440 VAC, 110ºC (Automotive Grade) Ordering Options Table Lead Spacing Nominal (mm) Lead Length (mm) Lead and Packaging Code 4 +2/-0 H0= 18.5 +/-0.5 00 DQ Tape & Reel (Large Reel) H0= 18.5 +/-0.5 CK Bulk (Bag) – Short Leads 3.5 +0.5/-0 JB Bulk (Bag) – Short Leads 4.0 +0.5/-0 JE Bulk (Bag) – Short Leads 3.2 +0.
PAGE 3
Metallized Polypropylene Film EMI Suppression Capacitors R47 Series, Class X1, 440 VAC, 110ºC (Automotive Grade) Dimensions – Millimeters FRONT VIEW SIDE VIEW L B H d LL p p B H L d Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.
PAGE 4
Metallized Polypropylene Film EMI Suppression Capacitors R47 Series, Class X1, 440 VAC, 110ºC (Automotive Grade) Performance Characteristics Dielectric Plates Winding Leads Protection Polypropylene film Metal layer deposited by evaporation under vacuum Non-inductive type Tinned wire Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94.
PAGE 5
Metallized Polypropylene Film EMI Suppression Capacitors R47 Series, Class X1, 440 VAC, 110ºC (Automotive Grade) Impedance Graph © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.
PAGE 6
Metallized Polypropylene Film EMI Suppression Capacitors R47 Series, Class X1, 440 VAC, 110ºC (Automotive Grade) Environmental Test Data Test IEC Publication Procedure Endurance EN/IEC 60384–14 Vibration IEC 60068–2–6 Test Fc 3 directions at 2 hours each 10 – 55 Hz at 0.
PAGE 7
Metallized Polypropylene Film EMI Suppression Capacitors R47 Series, Class X1, 440 VAC, 110ºC (Automotive Grade) Table 1 – Ratings & Part Number Reference Capacitance Value (µF) Dimensions in mm B H L Lead Spacing (p) dV/dt (V/µs) New KEMET Part Number Legacy Part Number 0.0047 0.0068 0.0082 0.010 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.047 0.047 0.056 0.068 0.068 0.068 0.082 0.10 0.047 0.047 0.068 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.
PAGE 8
Metallized Polypropylene Film EMI Suppression Capacitors R47 Series, Class X1, 440 VAC, 110ºC (Automotive Grade) Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 – 221ºC for the new alloys.
PAGE 9
Metallized Polypropylene Film EMI Suppression Capacitors R47 Series, Class X1, 440 VAC, 110ºC (Automotive Grade) Soldering Process cont'd Selective Soldering Recommendations Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath as in normal flow soldering without touching the solder.
PAGE 10
Metallized Polypropylene Film EMI Suppression Capacitors R47 Series, Class X1, 440 VAC, 110ºC (Automotive Grade) Marking Lead Spacing 10 mm FRONT TOP Capacitance Tolerance Series, Dielectric Code, Safety Class, Self Healing Approval Marks Manufacturer’s Logo Capacitance, Rated Voltage IEC Climatic Category Date Code Passive Flammability Category Manufacturing Plant Lead Spacing 15 mm, 22.
PAGE 11
IEC Climatic Category Date Code Manufacturing Plant Metallized Polypropylene Film EMI Suppression Capacitors FlammabilityGrade) Category: R47 Series, Class X1, 440 VAC,Passive 110ºC (Automotive B for volume ≥ 1750 mm3 C for volume < 1750 mm3 Marking cont'd Lead Spacing 22.5 mm (large case sizes), 27.5 mm, 37.
PAGE 12
Metallized Polypropylene Film EMI Suppression Capacitors R47 Series, Class X1, 440 VAC, 110ºC (Automotive Grade) Packaging Quantities Height (mm) Length (mm) Bulk Short Leads Bulk Long Leads Standard Reel ø 355 mm Large Reel ø 500 mm Ammo Taped 4.0 5.0 6.0 9.0 11.0 12.0 13.0 13.0 13.0 2000 1300 1000 1800 1500 1200 750 600 500 1500 1250 1000 1000 800 680 5.0 6.0 6.0 7.5 7.5 11.0 12.0 17.5 13.5 18.5 18.0 18.0 18.0 18.0 18.
PAGE 13
Metallized Polypropylene Film EMI Suppression Capacitors R47 Series, Class X1, 440 VAC, 110ºC (Automotive Grade) Lead Taping & Packaging (IEC 60286–2) Figure 1 Lead Spacing 10 mm Figure 2 Lead Spacing 15 mm Figure 3 Lead Spacing 22.5 – 27.5 mm P W2 P2 P h h W W0 W1 H0 ød P1 P0 F D0 t P1 P2 Taping Specification Dimensions (mm) Description Symbol 10 Fig. 1 Lead Space 15 22.5 Fig. 2 Fig. 3 27.5 Fig. 3 Tol. Lead wire diameter d 0.6 0.6-0.8 0.8 0.8 ±0.05 Taping lead space P 25.
PAGE 14
Metallized Polypropylene Film EMI Suppression Capacitors R47 Series, Class X1, 440 VAC, 110ºC (Automotive Grade) Lead Taping & Packaging (IEC 60286–2) cont'd Ammo Specifications Dimensions (mm) H W T 360 340 59 H T W Reel Specifications Reel Size Standard Large Dimensions (mm) D H W 355 500 30 25 55 Maximum D H W © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.
PAGE 15
Metallized Polypropylene Film EMI Suppression Capacitors R47 Series, Class X1, 440 VAC, 110ºC (Automotive Grade) KEMET Corporation World Headquarters Europe Asia Southern Europe Paris, France Tel: 33-1-4646-1006 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Sasso Marconi, Italy Tel: 39-051-939111 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.
PAGE 16
Metallized Polypropylene Film EMI Suppression Capacitors R47 Series, Class X1, 440 VAC, 110ºC (Automotive Grade) Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.